i saw most of the thread says that opty144 can go 2.8++ in stock voltage

how about the opty146???

should i go 4 146 or wait for some ppl to selling 144????

hard to get dission to it....

depends my fren not all processor are magic processor, make research on steppings, and opty 146 also can get colorfull result but as i said it depends on steping and othe hardware too, motherboard, ram, and others

for a same batch with similar OC capabilities, 146 wins for 10x multi over 144 9x multi [its good if u dont have ultra fast ram]

ok thats my rig without proc....

corsair c2pt
seagate 250gb
dfi lp ut nf4 ultra-d
cm hyper 6+
cm centurion 5
samsung 740BF
altec lansing fx 6021
lg dvd rw
antect neo

how will the opty 144 n 146 work in my rig???

both will work with ur rig.... as muox mention.... the stepping + luck plays the biggest roll in ocing.... some ppl has the same stepping but the oc result is not the same also...so it depends on luck also...

so do you guys know any goob chip for optry146 (the box no.)

If both 144 and 146 can clock max 2.8ghz.... which one is the highest clocker? of course the 144 right, because it has the highest percentage of overclocked speed.

for me... the best overclock chip would be the lowest/cheapest model, but able to overclock quite high.... like a 1.6ghz that is able to run at 2.7ghz.... not a 2.6ghz that is only able to clock at 2.8ghz. 200mhz difference? come on lah....

This post has been edited by soulfly: Jul 16 2006, 11:40 AM

btw bro...some reviewer said high multiplier can make overall system bus run on high speed.there said,not me.i forgot which url

One thing for sure... it's easier to overclock without using divider. When you use different divider, different combination of memory timing is needed. Very hassle....

The percentage of getting 3G stepping for 144 is slimmer than 146. Only 2 known stepping, CAB1E and CAB2E. The rest, depends on luck. if u can confirm get these 2 stepping, well, go for 144, if not, better go for higher multi. chances r higher

my CAB1E can't get prime stable at 3G over here

now playing u how much a vcore can core for this steeping..

currently 2.8ghz with 1.32v

It will be no point of getting opteron now as the price is very much higher.

opty onli gd for overclockers......

for those normal ppl go for the am2.....

opty arr opty.....

on now days there are so less opty can be found at LYP.....



hav any ppl can clock till 3.0ghz++???