I driven the City for 67 months. Didn't noticed any sluggish pick up in fact quite power if i floor it.

Anyway I have added voltage stabliser and K&N filter. Maybe this has help to improve the power.

Oh ya. I have changed to 205/50/R16 tyres but I don't feel it sluggish.

Hi Everyone,

My car just hit 139k few days back.

I just replaced my front and rear brake pads (Original Honda - Nissin).

Problem I having now is during braking at high speed (Above 100kmph), I will have vibration but not at low speed (below 80kmph).

I have skimmed my disc rotor few months back because of a very bad vibration at any braking speed.

Now this is a problem again. Heard that the original rotor is very prone to bend due to the current weather of rain and hot.

Just wondering anyone here have purchase a new rotor (original Honda), based online it is Bosch brand. How much is the expected damage?

Or should I change to Brembo (expected price?) with a new pair of brembo brakes

This post has been edited by Shreddy: Oct 27 2014, 11:41 AM

Hmm.. heard honda rotor always wrap.

How much you paid for the Brembo rotor?

Wah.. so much damage.. no enough budget... hehe

I think mine is only front rotor. Most probably will change new one but go back honda original parts.

Coz i heard drilled and crossed rotor will use a lot of brakes.

I replaced mine at 100k. original ngk iridium laser.. quite pricey.. not wrong should be about rm200++ for 4.

This post has been edited by Shreddy: Nov 3 2014, 03:10 PM

My car just hit 156k++ KM. Couldn't bear with the vibration around near stopping when braking. When pressing the brakes also got "Ee Oo Ee Oo" sound like the pump not enough lubricant.
When pressing to full stop.. got "Gong Gong Gong" sound like brakes jamming.

End up.. found out Front Rotors wrapped and Brake Pump Assembly part got torn.

Damaged RM994 with GST.
1. Front both rotors
2. Front both brakes pads
3. Brake pump assembly part
4. Engine oil change (Semi-Syn)
5. Japan manufactured Oil Filter
6. Brake Oil (Complete Flush)
7. Gear Oil (Complete Flush)

All above replaced with Honda Original Parts.

I did sound proofing for all 4 doors, inner floor, boot, mudguard area and engine hood.

Since then hardly hear my engine sound (when idle or cruising), tyres rotating sound gone (using Yokohama AR01 - 205/50/R16), motorbike exhaust sound also softer. Music played out more power and solid.

So conclusion either sound proofing or change a more silent tyres.

When my tyres are 50% wear out, sometimes still can hear the tyre noise but minimum, but that is the consequence of using single rotation, lower profile tyres. At least I get grip when driving.

Hehe.. someone got poisoned already. I did it at HT Auto. SS1, Petaling Jaya.

Damaged? depending on what you want.. there are 2 types of Dynamat. One normal and one lite.

Mine is normal cause that time the Lite one not out yet so there is additional weight added onto the car.

My 4 doors, floor, mudguard and boot is placed with one box of Dynamat Normal - damaged around RM1.5 - 2k

My Engine hood is with 1 piece of Dynamat Lite and 1 piece of Dynamat Hoodliner - damaged less than RM1k.

So in total around RM3k if my memory served me well (I installed in way back 5 years ago).

Happy soundproofing. Oh ya the lady boss name is Karen if you visit HT Auto just mention Edward with Honda City or from HC3 introduced one. Possible some discounts

Yeah. They will have to remove the seats to install it. Mine so far so good.. you just have to monitor them when they install.. make sure every screws or nuts taken out is accounted for

Then it is hard to consider for soundproofing as it requires the dissembling of the door panels like when you install your tinting. Remove seats and floor carpet to install the car floor. Removing the mudguard area to install. Remove the boot carpet to install. etc

so far my sis HRV having 14km/litre (shown in the meter) which is way better than my City that best 12km/litre.

Will update once I get more information from her since her car is only less than 200km clocked in.

Bro Str33tBoY and coo|dude,

I did it at HT Auto @ SS1

About 2 and half months.

I called.. the SC said replacement parts only arriving on September 2015 and I select the preferred SC. Till then no call from them yet.

Should I give another call to confirm again?

Oh.. you called SC directly.. sorry I called Honda Malaysia customer helpline. Will just wait for SC Sumber Auto to call since I already inform Honda Malaysia.

If by Sept 2015 no response only make another call to HM la...

Wow.. suggest you all go Honda Authorised Spare Part Dealer to get your brake pads...

Seems like all your prices are doubled.. I got my front for RM180.. RM190.80 with GST... I plus labour (outside foreman) also around RM220++ only with GST

Tiong Nam Spare Part Sdn Bhd in Seapark.

I did buy from the above and went to my foreman and replaced it (just pay labour charges).

Anyway nowadays I just go straight to Kam Meng Auto Suppliers & Trading Co. in Seapark, PJ as well. They get the parts from Tiong Nam. All in service. Save time.

I don't need to pay so much but still enjoy Original Honda Parts.

No sound so far.. same like changed in SC... price only RM200++ plus labour

Just replaced City's aircond blower for RM580 + RM100 labour. CNY 3rd Day aircond blower spoiled... Whole CNY holiday city no aircond.. chamness..