Nope, only 6000k color
Other option may need to sniff around at amazon

engine mounting

no problemo bruh

Last week my city was experiencing D transmission light blinking non stop on my dashboard panel
Blinking D drive
Go to first foremen and check with OBD claim gearbox need to be replace and gave me two choices
overhaul or half cut gearbox
then i tried to go another workshop to check if the same problem was diagnostic
after the OBD scan foreman told me it was P0848 error code
means the 3rd gear pressure sensor was faulty
then i proceed to request him give it a change
since then problem solved for now





This post has been edited by 90Boyz: May 21 2020, 04:18 PM

RM170 parts and labor

After that the foremen told me TMO gearbox mostly are very reliable unless ATF is overdue or using wrong/bad fluid
My City's ATF just only 17,000km but to play safe i decided to give it a change
so i went to shopee bought a bottle of new ATF but not Honda brand

Fluid that drain out was dark pink to my surprise, foremen take the drainage nut and take a look as the tips of the nut was magnetic there's tons of black powder sticking on it, he proceed to clean it off before pouring the new fluid into the gearbox.

I used DW1 too but it starts to give me problems
Thats why i choose others brand for this round

At Autohaus when i have my car service there

This post has been edited by 90Boyz: May 22 2020, 11:14 AM

Yea, i saw your experience on genuine ATF
Thats why my concern is Autohaus got their Dw1 from spare parts shop but genuine or not which im not sure
But frankly speaking, after using penrite atf
My car gear shifting much less jerking compared to previous fluid and also engine sounds less noise too

this is the DW1 i used at that time
sorry poor phone camera quality


looks like Autohaus are providing me the fake oil
as the label on the bottle got the cautions sticker

This post has been edited by 90Boyz: May 22 2020, 11:43 AM

it will be damn costly to change all 4 wheel bearings ... bring it to the workshop they will check for you .

Do you think we can use the carb cleaner the clean the dirty oil at the hose B-1 ?

mine roughly 12km/liter mostly 60highway40city

maybe item no.12 & 14 can be consider to replace

no.12 : Bearing, Shock Absorber Mounting

no.14 : Damper, Rebound Stop

something like this is good


This post has been edited by 90Boyz: Jul 29 2020, 11:18 AM

you may try out Continental UC6 which much better in dry and wet grip
as long is not ecopia ep300 which is noisy when cruising on highway

This post has been edited by 90Boyz: Jul 29 2020, 04:01 PM

MC6 need 17' rim sizes and don't have 16 and below
UC6 for 185/55/16 around price range 200~220
my next tire might looking into XM2+

is a gearbox breather tube
Item : no.26


This post has been edited by 90Boyz: Aug 3 2020, 03:56 PM

or maybe can spray some rubber safe cleaner to the hose to clean up to clog ?

You can get whole sets of KYB absorber from this seller at better price