Thanks to Bishop for the great pick-me-up, Forger B is nearing its completion. Will need to spray black on the upper nose, decals and a bit of touch up, and we are done

done and done

Bolehlah. I do think I did better with Kitech Foxbat though

Whoa, gorgeous. It must been quite a challenge to do that camo pattern that bmpt is killing it, greatly done

Fuh, good thing I don't make 1/35, I have no patience to do it slowly Well, at least it is done nicely, and stashed well without random hands touching it, it should last for ages

My resin BMPT is still just the way I received it malas nak sentuh dulu selagi skill is not that good. Train with easier kits first

Ok siap.

Italeri 1/72 Bishop Mk. I
23rd Armoured Brigade, 142nd Field Regiment, Italy, 1943

Now those wankers won't get cocky once we lob our shell over them

Since some of the mold are acquired from old ESCI mold, I do think the charm of these is the ease of construction. Details are great, if one is not a rivet counter (I am surely not, hence I don't really care now for the accuracy of the kit )

For percentage, yes, but since the basis was of Valentine tank, that would answer why the superstructure seems big (and derpy )

now need to find AB set

just ask uncle low if he could bring those in
in regards to the price, i do agree if it is available by other manufacturers, better go with the latter
typical of short run, but ace do produce some kits that others didn't even planning to make
will try to get some s-model and more modelcollect in the future, to bulk up my russian ground forces

that rename of mt-lbm-6m3 is a good way of saying it
got that already, but in die-cast form (fabbri)
probably will get it after my second batch of order with hhq is done (2nd batch even more than this one )

I PO with HHQ already for A version
MS export, tamau

This Nona SPG is even smaller than my MT-LBM
The size would be around a big SUV I reckon

One more left and I am halfway done assembling these babies (no suspension, stowage and PE)
That ZSU-23-2 is a daunting challenge in 1/72

fuh 1/48. I main 1/72 only next shipment for taobao izit?

THAT small? Lol

In that case, it is a better bargain to get it
1/72 SCUD? Toxso ah? I saw the review, got some inaccuracies eg. doors are big, etc, but unless one is a rivet counter, the details should be more than enough

The mold seems sharp with little to no flash whatsoever, a good move for a brand new manufacturee in scale kit world

Yes, that I agree. Resin is worse since it require a person to do lots of preparation for it
And BTW, Toxso is making the TEL movable, not like Zvezda's Topol, so, that is something, right
Even the 105 mm and 155 mm gun under the same branch also included spring to replicate recoil in 1/72, which is saying something regarding their dedication

How much is the SCUD from your agent? I might be getting SCUD too later in the future, if the price is good

Older release was either PE tracks or plastic, right? Newer ones came with the vinyl ones, with is a great thing (at least to me, I'm lazy to assemble plastic track )
Oh you will be surprised. The ZSU-23-2 is not done yet, PE parts is still not attach

Seems like it, and if so, it would be like the newer release of Bandai's Star Wars line of vehicle such as X-Wing and TIE. Multicolored plastic with easy build (snap fit)

Of course in the right hand (certainly not mine LOL) painting the product would enhance the final appearance










Guys, I am still wondering on how to properly cut resin off the kit. My BMPT's threads (lower parts) is the part with excess resin block. I don't have access to hobby saw. Is the other way to cut it and sand in order to preserve the threads surface details? Surely it won't be seen if put it on display, but if I could preserve the threads, it would be better for me.

somewhat productive sunday

That one is halfway done only, still haven't put PE. Surely the detail will be even more stunning after PE attachment

Sorry to hear about your Topol (not M, 7 tyres only ). Luckily mine was okay in terms of the alignment.

myr 100-110 is a good price for scud. local sellers are selling somewhat inflated price at myr 130.00 w/o shipping

but as of now, not really a concern since not in my near future to-get list