My elantra has been having difficulty to start for quite sometimes. I need to press twice the start button, the first one wouldn't start the car. From the google I realize this is throttle body issue. Need some cleaning.
Yesterday I DIY throttle body cleaning.There're only four screws to remove . I did not completely remove the throttle body as there are two tubes attached. I only detached it from the air inlet off the engine.
I sprayed throttle body special cleaning agent thoroughly inside and outside, then I used dry kitchen tissue papers to wipe all the black dirts. I make sure I didn't wipe it too hard as it may destroy any sensors there. Anyway the throttle shines well.
However after I put all back together and started the car, the check engine light was came on the dashboard panel. This might be a false alarm because the cleaning involved moving the throttle plate. But it might also be the real problem to the throttle position sensor (TPS).
To clear this issue, I reset the check engine light by took out the negative cable off the main battery and touch it to the positive battery cable. This will confirm if there is indeed a problem to TPS, in which the check engine light will remain there on the dashboard panel even after resetting.
Indeed it was a false alarm, the check engine light went off after I reset it.
Attached thumbnail(s)