Welcome Guest ( Log In | Register )

203 Pages « < 184 185 186 187 188 > » Bottom

Outline · [ Standard ] · Linear+

> How to choose a good Cooker Hoods & Gas Hobs ?, Kitchen appliances hood / hob / oven

views
     
blanket84
post Sep 17 2022, 10:08 PM

Regular
******
Senior Member
1,499 posts

Joined: May 2008
QUOTE(red-queen @ Sep 17 2022, 07:19 PM)
is it reliable? after sales service?

comparing the bosch series 6 ss (PCC6A5B90) vs DE&E (S8669B) vs Firenzzi (FH-9543). both DE&E and Firenzzi are using sabaf burners and comes with 5 of it whereas bosch only has 3 burners.

i'm ok with the quantity of the burners cause i will be having an induction domino beside.
*
I’ve only been using it for 1 year ++. So far so good. Flameselect gets you consistent amount of flame. So once you get used to the hob, you would easily know the right number to get the right amount of heat. Flame strength is good, above my expectation.

After sales service is good. There was once I called them because I thought the surface was chipped, they came down and turns out it was only some stubborn dirt. The technician they sent was an experience uncle working for them for more than 20 years. The technicians are their employee, not some third party contractor.

Number of burner actually doesn’t matter much. It’s not like you’d be using all 5 at one go.
red-queen
post Sep 18 2022, 11:58 AM

Regular
******
Senior Member
1,305 posts

Joined: Jan 2003



QUOTE(blanket84 @ Sep 17 2022, 10:08 PM)
I’ve only been using it for 1 year ++. So far so good. Flameselect gets you consistent amount of flame. So once you get used to the hob, you would easily know the right number to get the right amount of heat. Flame strength is good, above my expectation.

After sales service is good. There was once I called them because I thought the surface was chipped, they came down and turns out it was only some stubborn dirt. The technician they sent was an experience uncle working for them for more than 20 years. The technicians are their employee, not some third party contractor.

Number of burner actually doesn’t matter much. It’s not like you’d be using all 5 at one go.
*
Thanks buddy! Im also leaning towards bosch.
hotNcool
post Oct 4 2022, 02:56 PM

Getting Started
**
Junior Member
212 posts

Joined: Mar 2014


QUOTE(Penang_J @ Jun 9 2022, 01:04 PM)
I go for Fotile EMG9035 hood and gas hob GAG86210 (better glass compared to my previous purchase GAG76202).
*
how was the user experience using the fotile hood, can share mah?
hotNcool
post Oct 6 2022, 08:28 AM

Getting Started
**
Junior Member
212 posts

Joined: Mar 2014


QUOTE(dayalan86 @ Mar 12 2022, 10:31 AM)
Not sure, we only clean our Fotile hood once a month or sometimes once in three months. Major Cleaning every 2 years once (involves removing the fan and internal cleaning)

So far I find the two tier pyramid style filter easy to clean, over the past 7 years. Compared to our old Fujioh, which had baffle + mesh filter. The mesh filter is a nightmare to clean; as we didn't have dishwasher back then. Running it over hot water doesn't really degrease it and using a commercial degreaser, stripped off most of the filter coating along with the grease.

Not so rajin to clean after every use and mostly used by mom, hence I only clean whenever I am free and feel like cleaning it.
*
these modern hood nowsaday need to korak 1 lubang sambung luar for ventilation not?
passmaster14
post Oct 10 2022, 01:18 AM

Getting Started
**
Junior Member
187 posts

Joined: May 2010


hey sifus, i'm looking for a hood for my kitchen. read a bit here, and i've narrowed it down to the fotile 9035 and the fotile 9009t.

leaning quite a bit towards the 9009t, but wondering if the lack of a filter will be bad over time? my wife and i generally cook a lot of asian stuff, so there'll be quite a bit of oily dishes haha.

or is my concerns not an issue because of the high airflow? hope any owners here can share your experience. thanks!
SIEWBAO
post Oct 10 2022, 09:23 AM

Casual
***
Junior Member
330 posts

Joined: Jan 2013
Ceramic or Induction is better? Should I get both of them?
Penang_J
post Oct 14 2022, 12:52 AM

Getting Started
**
Junior Member
275 posts

Joined: Jan 2011
QUOTE(hotNcool @ Oct 4 2022, 02:56 PM)
how was the user experience using the fotile hood, can share mah?
*
Not yet install, waiting my house to ready…
hotNcool
post Oct 14 2022, 07:29 AM

Getting Started
**
Junior Member
212 posts

Joined: Mar 2014


QUOTE(Penang_J @ Oct 14 2022, 12:52 AM)
Not yet install, waiting my house to ready…
*
you might share yours here?

Penang_J
post Oct 14 2022, 11:13 PM

Getting Started
**
Junior Member
275 posts

Joined: Jan 2011
QUOTE(hotNcool @ Oct 14 2022, 07:29 AM)
you might share yours here?
*
Don’t worry bro, I’m active member for years. Good things and experience had to share with others too.
ben3003
post Oct 20 2022, 08:59 AM

10k Club
********
All Stars
10,604 posts

Joined: Jan 2003
From: Sarawak


guys any recommendation for cooker hood? the one at home almost 20years dragonfly brand, seems like it is time to change. Here alot ppl use dragonfly brand at sarawak. not sure those brand bring in by senq ROBAM, electrolux or harvey norman ok or not. budget 1-2k+-, normally cook not very big fire la. got existing exhaust hole already.
Disciple
post Oct 23 2022, 03:35 PM

Master of Disaster
*******
Senior Member
2,256 posts

Joined: Sep 2007
Hi, I live in a condo and have just gotten a kitchen hood. It says that it recycles the air. But all I see is the hood blows the air into the cabinet. Attached picture. Air just comes outta the black hole.

Isnt there some type of cover to close the hole so that the air doesn't go into the whole cabinet? Doesn't make any sense to install the hood if that's the case. It will just blow the greasy smoke into the cabinet and damage it.

Our first time using hood, never in my life.. So I am unsure how it works. Brand is Rubine Boxline X90SS.

Can anyone advise if this is actually how it works? Hood blows air direct in to the kitchen cabinet?


Attached thumbnail(s)
Attached Image
nite_eif
post Nov 11 2022, 12:31 PM

Casual
***
Junior Member
479 posts

Joined: Apr 2010
building a new house n looking for kitchen appliances..

bought Elba hood - eterno with 1400m3/h

now looking for a suitable hob..supposedly a wide one that can be used with a big wok but donot obstruct other burner

electrolux 90cm series vs rinnai RB-93UG vs Bosch serie 6 vs firenzzi

anything to take note? build quality etc..
LA773
post Nov 16 2022, 11:49 PM

Enthusiast
*****
Junior Member
943 posts

Joined: Apr 2020
QUOTE(BlackPen @ Nov 5 2021, 12:23 PM)
Yesterday went to the Bukit Jalil Home Living and bought SZ-CH9633AC + SZ-RC3300i Tri-Zones Multicooker about 3k.

Bought this because can dismantle the fan and wash it. Seem like quite easy to maintain the Hob.

1st time use hod and electric stove. Mind share me your thought and experience on Senz?

The installation recommended height 300~450mm for the electric stove. May I know you all install what height is the best for suction?
*
Bro,
I know, old posts, but may i ask.. SZ-CH9633AC is the suction noisy
Just installed mine few weeks ago, the fan suction sounds quite loud, urs hv this problem too?
BlackPen
post Nov 18 2022, 02:16 PM

GOD Hand
*****
Senior Member
865 posts

Joined: Apr 2010
From: Buddha Hand



QUOTE(LA773 @ Nov 16 2022, 11:49 PM)
Bro,
I know, old posts, but may i ask.. SZ-CH9633AC is the suction noisy
Just installed mine few weeks ago, the fan suction sounds quite loud, urs hv this problem too?
*
Hi, yes kinda loud that suction noise
NorAzdanNordin
post Nov 21 2022, 08:57 PM

Getting Started
**
Junior Member
132 posts

Joined: Aug 2019
QUOTE(Disciple @ Oct 23 2022, 03:35 PM)
Hi, I live in a condo and have just gotten a kitchen hood. It says that it recycles the air. But all I see is the hood blows the air into the cabinet. Attached picture. Air just comes outta the black hole.

Isnt there some type of cover to close the hole so that the air doesn't go into the whole cabinet? Doesn't make any sense to install the hood if that's the case. It will just blow the greasy smoke into the cabinet and damage it.

Our first time using hood, never in my life.. So I am unsure how it works. Brand is Rubine Boxline X90SS.

Can anyone advise if this is actually how it works? Hood blows air direct in to the kitchen cabinet?
*
Recirculating hood is not really suitable for our Asian type of cooking….filters doesn’t absorb oil from the smoke that good.

https://www.coolblue.be/en/advice/what-is-a...range-hood.html

To answer your question, yes, that’s how it works. It sucks the oily/greasy smoke, passes it through filters in the hood & then releases the filtered air out. Whether it’s filtered effectively or not, that’s a whole different matter.

I’d imagine higher end brands filter better vs Rubine.
Disciple
post Nov 21 2022, 09:30 PM

Master of Disaster
*******
Senior Member
2,256 posts

Joined: Sep 2007
QUOTE(NorAzdanNordin @ Nov 21 2022, 08:57 PM)
Recirculating hood is not really suitable for our Asian type of cooking….filters doesn’t absorb oil from the smoke that good.

https://www.coolblue.be/en/advice/what-is-a...range-hood.html

To answer your question, yes, that’s how it works. It sucks the oily/greasy smoke, passes it through filters in the hood & then releases the filtered air out. Whether it’s filtered effectively or not, that’s a whole different matter.

I’d imagine higher end brands filter better vs Rubine.
*
Thanks man. Yes it is totally not suitable for Asian cooking. But have to deal with it since we have bought it now.
bbs123456789 P
post Nov 21 2022, 09:44 PM

New Member
*
Probation
21 posts

Joined: Jul 2022
Hi all,

I am looking into getting a hood+induction cooking hob from either Electrolux or Fotile. But I'm also looking into a basic one due to budget constraint.

What do you think of the pairing below? Can any sifu give me some insights? Basic cooking only

Combo 1:

Types Brand Product Code Price
Hood Fotile EMS9028S1,480
Hob Fotile EEG-752012,499

Combo 2:

Types Brand Product Code Price
HoodElectroluxEFC935SAR1,730
HobElectroluxEHI7260BB2,399

Would really need some help here guys, as i am going into construction state soon. Thanks in advance!!
NorAzdanNordin
post Nov 21 2022, 11:38 PM

Getting Started
**
Junior Member
132 posts

Joined: Aug 2019
QUOTE(bbs123456789 @ Nov 21 2022, 09:44 PM)
Hi all,

I am looking into getting a hood+induction cooking hob from either Electrolux or Fotile. But I'm also looking into a basic one due to budget constraint.

What do you think of the pairing below? Can any sifu give me some insights? Basic cooking only

Combo 1:

Types Brand Product Code Price
Hood Fotile EMS9028S1,480
Hob Fotile EEG-752012,499

Combo 2:

Types Brand Product Code Price
HoodElectroluxEFC935SAR1,730
HobElectroluxEHI7260BB2,399

Would really need some help here guys, as i am going into construction state soon. Thanks in advance!!
*
Electrolux, simply because Fotile is a China brand and Electrolux is a Swedish brand.

Quang1819
post Nov 28 2022, 08:13 PM

Look at all my stars!!
*******
Senior Member
2,603 posts

Joined: Dec 2012
QUOTE(NorAzdanNordin @ Nov 21 2022, 11:38 PM)
Electrolux, simply because Fotile is a China brand and Electrolux is a Swedish brand.
*
That's a horrible point lol
hotNcool
post Nov 29 2022, 09:36 AM

Getting Started
**
Junior Member
212 posts

Joined: Mar 2014


QUOTE(SIEWBAO @ Oct 10 2022, 09:23 AM)
Ceramic or Induction is better? Should I get both of them?
*
im also in the dilemma , shall i get a combination hob with induction and ceramic or shall i just get ceramic cooker double hob instead? blink.gif

203 Pages « < 184 185 186 187 188 > » Top
 

Change to:
| Lo-Fi Version
0.0538sec    0.54    7 queries    GZIP Disabled
Time is now: 29th March 2024 - 07:15 AM