Why are chimney better than slim hood?? Is it the suction power? Wouldn't slim hood's double motor compensates on the suction power ability? Kinda not expert in this please advise.
1) Yes, it is 900mm

2) The problem is I want to avoid hacking the ceiling (due to low height) or change my cabinet, as previous slim hood duct were all done in the cabinet. Can the chimney hood duct be installed as in this picture?





[attachmentid=6809445]

This post has been edited by MishimaZ: Jun 10 2016, 12:26 AM

existing user cannot change to removable. i m using the older version as well. few months spray 1 time cleaner lo, not too hard.

Good things Fotile listens to customers feedback and keep on improve their products

1) Slim hood two motors but 1 outlet only, wont this cause bottle neck and smoke would not be able to be extracted smoothly? Many more, just drop by my showroom and i will explain the details. If you are using a slim hood now, you will know how effective it is and its disadvantages.

2) Fotile JQG9009 most probably yes but will need to make the hole bigger (7") current hole is 6". Will need detail measurements of cabinet and high from table top to cabinet to make sure we can install the hood as well. These will take time to discuss as well. Measure the details then we can discuss in my shop later

like very noisy like that

the noise is coming from the steeam/smoke generator. Drop by our shop to listen to the actual product

Hi Zheilwane,

I'm a bit confuse which hod is suitable for my house whether rubine or fotile. As my old glass hob had been broken. Cut out demention is 71 L X 41 W (cm). If can I would like to use type 3 burner. I'm prefer a good quality and got safety function. My budget will be around rm1k

This post has been edited by parabola: Jun 16 2016, 02:59 PM

Parking for future references

71cm is too small for a 3 burner. Dont, think u will be able to use 3 burners at the same time, the middle one will definitely b blocked by your pot/wok on the left or right burner.

RUBINE ASSALTO2B will be suitable
http://www.rubine.com.my/prodetails.php?pr...GH-ASSALTO2B-BL

This post has been edited by zheilwane: Jun 16 2016, 03:45 PM

What do u think about below hob
1. fotile FD2B
2. Rubine RGH Venosa 2B
3. Rubine RGH Assalto 2B

1. Cannot fit
2. cannot fit
3. Assalto highest range under RUbine, one of their best model.

Hi guy,

I would like to move my hob from the original place to yard.

After removed the hob, there will be one large hole on the table top.

May i know, besides changing a new table top, is there any alternative to cover the hole??

Hi zheilwane

Any thoughts on the Rinnai RB3CG Inner Burner Gas Hob and Fujioh GFP 900? Would really appreciate your advice. I am doing reno and need to select hob and hood soon. TIA!

Hi parabola,

We have the New Beko Gas Hob (4.5kw x2) HISW72225SOB (2BURNERS) & (4.5kw x2 + 1.7kw) HISW73225SOB (3BURNERS) c/w 2Years Warranty.
Cut out : 700mm x 400mm

We are having Warehouse Clearance Sales start from today (17th to 19th-June-16)



This post has been edited by ubzteam: Jun 17 2016, 11:44 AM

Hello guys,

Anyone have experience using OUYI hood product? I have really bad experience with them. Just want to know whether u all have same issue.

This post has been edited by rodymus: Jun 17 2016, 12:34 PM

These two models performance is definitely good but i do advise you to look at the actual unit and try to imagine how you gonna maintain/clean them.

Go have a look at these actual models then drop by my shop and compare with Fotile JQG 9009 + GCG 90301

Been approached by their salesperson before, after comparing spec and price wise is comparable to RUBINE. Since it is comparable not cheaper or better, we prefer to sell RUBINE which has been established long in malaysia. Why wanna take risk to buy a newer brand that has no competitive advantage?

I have seen the Rinnai inner burner..will there be any problem cleaning it? Please advise. I am in East Malaysia.

Just curious...how did the glass break? Thought it is tempered glass and should withstand some force and heat as well.

Since the design is inner flame, there is chance that food/soup can get into the hob, making it impossible to clean unless u remove the glass. Though there is a removable cup at the bottom, i still think it is possible that thing can get to the side and into the hob. Look at the hob again and imagine if your soup overflow into it, what and where you need to wipe?

Just recorded this video, since i m using Fotile GCG 90301, i can comment more and demo it


This post has been edited by zheilwane: Jun 17 2016, 10:32 PM

What happened ? I just installed but not used yet .