Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 [WTS] 1GB, 2GB, 4GB Ram (Laptop & Desktop), DDR, DDR2 & DDR3 available

views
     
takr
post Jul 7 2015, 06:33 AM

New Member
*
Junior Member
39 posts

Joined: Dec 2006
Hi,
Do you have something like these (sorry not very tech savvy)? Need 8 gig..

Ram Type = DDR3
Maximum Clock Speed (MHz) = 667 (JEDEC)
Maximum Transfer Speed (MHz) = DDR3-1333
Maximum Bandwidth (MB/s) = PC3-10600
Memory Capacity (MB) = 2048
Module Voltage = 1.5V
Jedec Manufacture Name = Nanya Technology
SPD Revision = 1
Registered = No
ECC = No
DIMM Slot # = 1
Manufactured = Week 34 of Year 2010
Module Part # = NT2GC64B88B0NS-CG
Module Revision = 0x0
Module Serial # = 0x39F5227E
Module Manufacturing Location = 13
# of Row Addressing Bits = 15
# of Column Addressing Bits = 10
# of Banks = 8
# of Ranks = 1
Device Width in Bits = 8
Bus Width in Bits = 64
CAS Latencies Supported = 6 7 8 9
Timings @ Max Frequency (JEDEC) = 9-9-9-24
Maximum frequency (MHz) = 667
Maximum Transfer Speed (MHz) = DDR3-1333
Maximum Bandwidth (MB/s) = PC3-10600
Minimum Clock Cycle Time, tCK (ns) = 1.5
Minimum CAS Latency Time, tAA (ns) = 13.125
Minimum RAS to CAS Delay, tRCD (ns) = 13.125
Minimum Row Precharge Time, tRP (ns) = 13.125
Minimum Active to Precharge Time, tRAS (ns) = 36
Minimum Row Active to Row Active Delay, tRRD (ns) = 6
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) = 49.125
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) = 160
Write Recovery Time, tWR (ns) = 15
Internal Write to Read Command Delay, tWTR (ns) = 7.5
Internal Read to Precharge Command Delay, tRTP (ns) = 7.5
Minimum Four Activate Window Delay, tFAW (ns) = 30
RZQ / 6 Supported = Yes
RZQ / 7 Supported = Yes
DLL-Off Mode Supported = Yes
Maximum Operating Temperature Range © = 0-95
Refresh Rate at Extended Operating Temperature Range = 2X
Auto-self Refresh Supported = Yes
On-die Thermal Sensor Readout Supported = No
Partial Array Self Refresh Supported = No
Thermal Sensor Present = No
Non-standard SDRAM Type = Standard Monolithic
Module Type = SO-DIMM
Module Height (mm) = 30
Module Thickness (front), (mm) = 2
Module Thickness (back), (mm) = 2
Module Width (mm) = 67.6
Reference Raw Card Used = Raw Card B Rev. 2
DRAM Manufacture = Nanya Technology


Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0139sec    0.44    7 queries    GZIP Disabled
Time is now: 27th November 2025 - 09:52 PM