Oct 6 2014, 06:30 PM
QUOTE(kimsim @ Sep 25 2014, 08:05 AM)
WHY choose an R410a gas?
What benefit of using R410a gas or rather than stick with older R22 to be save place.
R410 :
1. High pressure = what? Fast cooling.
2. Used better compressor type = reduce vibration and noise wise.
3. Lower input watts with variable speed.
4. Fully used micro computer to monitor indoor & outdoor temperature to reduce fan & compressor speed.
5. What for you buy R410a? = save monthly bills that is and also comfortable air and quiet.
Conclusion :
To be compare from R22 non-inverter there's actually high price tag, but more long runs.
Also redo new gas pipes and check with the specs or shop or contractor for more info or extra wires.
R22 :
1. Slower cooling and fixed speed to keep quicky reached temp or draw more power to blow out that area.
2. Cheap : That is not exactly, usually is cheated by salesman or seller, cause cheaper and get more higher profits to sell out as higher volume, this is not our part to be concerned.
3. Maintenance cheaper than inverter? Maybe you are wrong way, for example like York used more non-inverter for over 2 yrs has some issue like noisy or compressor mounting issue or fan motor running noisy = used more money to be replace parts.
Conclusion :
1. Good still runs in everywhere.
2. Good buy, cause cheaper than Rm300 to be compare on 1hp inverter unit.
3. Not need headache for replace gas pipes or wires else.
hi bro...i have gonna thru 80+ pages..but seem like the topics being discussed are (In-comparison between Non-inverter (R22 gas) VS Inverter (R410a gas):What benefit of using R410a gas or rather than stick with older R22 to be save place.
R410 :
1. High pressure = what? Fast cooling.
2. Used better compressor type = reduce vibration and noise wise.
3. Lower input watts with variable speed.
4. Fully used micro computer to monitor indoor & outdoor temperature to reduce fan & compressor speed.
5. What for you buy R410a? = save monthly bills that is and also comfortable air and quiet.
Conclusion :
To be compare from R22 non-inverter there's actually high price tag, but more long runs.
Also redo new gas pipes and check with the specs or shop or contractor for more info or extra wires.
R22 :
1. Slower cooling and fixed speed to keep quicky reached temp or draw more power to blow out that area.
2. Cheap : That is not exactly, usually is cheated by salesman or seller, cause cheaper and get more higher profits to sell out as higher volume, this is not our part to be concerned.
3. Maintenance cheaper than inverter? Maybe you are wrong way, for example like York used more non-inverter for over 2 yrs has some issue like noisy or compressor mounting issue or fan motor running noisy = used more money to be replace parts.
Conclusion :
1. Good still runs in everywhere.
2. Good buy, cause cheaper than Rm300 to be compare on 1hp inverter unit.
3. Not need headache for replace gas pipes or wires else.
1) Non-inverter using R22 refrigerant - cheap, more reliable due to less components, high electricity bill due to inefficient of R22 and start-stop operation feature of non-inverter compressor
2) Inverter using R410A refrigerant - Expensive, tend to break down faster due to more components, save electricity bill once optimum temp has reached, thx to the DC motor.
BUT.....
there is another category of NON-inverter + R410a refrigerant A/C available in the market, would u mind to comment on this category of A/C interms of
a) maintenance? (same like expensive inverter type?)
b) electricity bill? (Same expensive like those conventional R22 gas non-inverter?)
c) and etc....
actually i am referring to YORK ecoking series which is NON-inverter + R410a refrigerant, i found a quite good bargain shop selling 1HP without installation only at RM830..still hesitating on the purchase..
thx ya~~
This post has been edited by siaokialeong: Oct 6 2014, 06:35 PM
Quote
0.0396sec
0.54
7 queries
GZIP Disabled