yea i know this... thanks for the info.. i ordered daikin ftks.. waiting them to come over to install lolz

Wooohooo.. installed my 1st air cond brand Daikin R410a !! lolz...
the compressor damn big... bigger than Panasonic which my neighbour have it...

dude it suppose to be different what... what kind of question u asked ? =.=
go read SEER rating.. and how to calculate


huh? dont understand u..
i tested yesterday night... with 25 degree... comfortable level.. dont owned a R22 before so i dont know R22 cooler or R410a

oh my bad... actually i do 2 time of calculation

as u know inverter there are variable power / btu output..
the 1st one i calculate using the MAX power
and for the 2nd i calculate at the spec btu output..


to make it clear example as below:-

Daikin 1 HP R410a

btu/h 8,500 (4,100 - 10,900)
power consumption 0.70 (0.30 - 1.05)


1st calculation 10,900 divide by 1050Watt = 10.38 EER
2nd calculation 8500 divide by 700Watt =12.14 EER

so this is how i calculate.. i estimate the maximum and the recommended btu/h to see which 1 is the most high EER =)
thus power saving

This post has been edited by freestyler87: Feb 26 2014, 10:00 AM

np glad to help haha...

by the way, who using R410a Daikin 1 HP?

kinda confuse with the function

1) the Dry Mode... what its for? means like normal fan only without cooling?
2) the mould proof function.. how to use it?



and daikin compressor damn big man.. lolz

well, for the 1st time user the only thing can compare is through the spec... i wish can test run all the brand in my room for a week before purchase... HAHAHAH !

err shit..i didnt ask that... by the way what is drain plate?
i know how to remove the filter to clean..

only got drain pan... the drain pan seems need to remove the whole cover

after i read through the installation manual i found out my installer didnt do 1 thing... in the manual mention the Liquid and Gas Pipe should be separately insulate , but my installer insulate it together...

T_T

i dont mind as long as insulate it well... extra charge is ok..
but its ok right even tho they put both pipe together in one insulator..

any for the compressor to my in-door unit is around 5 feet only...

hmm? what happen? lolz i didnt bother about the compressor start late or what... as long as it start lolz...

well quite noisy the compressor even i put it in silent mode..

same... but for me is loud already lolz,

is that 1 HP Compressor?

lol... well i just know daikin compressor compare to panasonic compressor ( which my neighbour have it ) damn big lolz..

@kimsim

i would like to try dismantle my blower unit this weekend when im free,
will try to post the picture where is the daikin R410a drain plate lolz...

only different 110btu doesnt meant anything at all... rather go for more HP...

just my 2 cent =)

@kimsim

I try to dismantle the indoor unit which i manage to dismantle the top part for the lower part i not dare to use force.. afraid broke my indoor unit... im guess need wait till the service time came and look how the air cond guy dismantle...

trying to find installation manual for FTKS25DVM non of them is the same model of mine... trying to dismantle today but failed again.. the hook on the bottom part cannot come out...

REPORT..


using Daikin 1HP R410a for my Bedroom
so far so good... the electricity bills remain the same lolz... not even hike up much... about rm5 only sometimes lower

been using it almost 3 months...

is the same... 25c with lowest fan... cold what...