Can I use normal 3 pin plug(13AMP) for air cond?

bought ME SRK10YL, is it a good choice? becos my area no mr.slim model..

MHI SRK10YL quite good.
8530BTU at 670w , even condenser size quite big also, hopefully can cooling fast.

kk.. normally u guys using ME which model? i din know is MHI one.. cos miri only have 1 dealer >< but hopefully is good la..

My wife home town in sibu then the only choice for MHI.. still better than Daikin..
even in kuching sarawak dun have ME model, but MHI inverter deluxe model is quite good already.

if in west malaysia baru got ME model and prefer here : http://www.mitsubishielectricmalaysia.com/...ircond/inverter

oh kk.. so MHI and ME actually more or less the same? i think the inverter i bought is deluxe one..

ME got easy clean only, then the dun have easy clean function for manual user do in without any tool.
Any how MHI is the best choice... if i am living in sarawak the only choice also go for MHI deluxe.

http://www.kimrovacstore.com/mitsubishi-el...lean-video.html

oh kk.. but this MHI got ionizer or not? no see they got say but the seller tell me got..

thanks bro hopefully it is a good one.. they gonna install tomorrow..

WHY choose an R410a gas?

What benefit of using R410a gas or rather than stick with older R22 to be save place.

R410 :
1. High pressure = what? Fast cooling.
2. Used better compressor type = reduce vibration and noise wise.
3. Lower input watts with variable speed.
4. Fully used micro computer to monitor indoor & outdoor temperature to reduce fan & compressor speed.
5. What for you buy R410a? = save monthly bills that is and also comfortable air and quiet.

Conclusion :
To be compare from R22 non-inverter there's actually high price tag, but more long runs.
Also redo new gas pipes and check with the specs or shop or contractor for more info or extra wires.

R22 :
1. Slower cooling and fixed speed to keep quicky reached temp or draw more power to blow out that area.
2. Cheap : That is not exactly, usually is cheated by salesman or seller, cause cheaper and get more higher profits to sell out as higher volume, this is not our part to be concerned.
3. Maintenance cheaper than inverter? Maybe you are wrong way, for example like York used more non-inverter for over 2 yrs has some issue like noisy or compressor mounting issue or fan motor running noisy = used more money to be replace parts.

Conclusion :
1. Good still runs in everywhere.
2. Good buy, cause cheaper than Rm300 to be compare on 1hp inverter unit.
3. Not need headache for replace gas pipes or wires else.

hi bro...i have gonna thru 80+ pages..but seem like the topics being discussed are (In-comparison between Non-inverter (R22 gas) VS Inverter (R410a gas):

1) Non-inverter using R22 refrigerant - cheap, more reliable due to less components, high electricity bill due to inefficient of R22 and start-stop operation feature of non-inverter compressor

2) Inverter using R410A refrigerant - Expensive, tend to break down faster due to more components, save electricity bill once optimum temp has reached, thx to the DC motor.

BUT.....

there is another category of NON-inverter + R410a refrigerant A/C available in the market, would u mind to comment on this category of A/C interms of

a) maintenance? (same like expensive inverter type?)
b) electricity bill? (Same expensive like those conventional R22 gas non-inverter?)
c) and etc....

actually i am referring to YORK ecoking series which is NON-inverter + R410a refrigerant, i found a quite good bargain shop selling 1HP without installation only at RM830..still hesitating on the purchase..

thx ya~~

Hi, noob here :')

I want to put AC at living room but i don't want to see the black pipe and the socket on the wall. Currently there's nothing on the wall.

1. I ask the wiring man but he said, deal with AC people. Wiring and AC are different people?

2. How they hide the black pipe? Since there will be wiring and cornish, which one comes first?

3. Always curious if no socket then how?

4. Wiring man quote rm160 to do the wiring for 1 AC. Is it reasonable? Since he didn't ask and say anything about the specs, i assume he uses the basic@cheapest thing hehe..

5. Another headache is to put AC at high ceiling bedroom in the middle of the house. Where the "thing with fan" will be? At the back/front of the house, or outside small window on upper side of wall?

Thank you in advance.

Talk about aircon gas :

R410a has more higher pressure = more faster temperature reaching, also energy saving.

But R410a Non-inverter not suitable for used in bedroom, the cut of times x 2-3 than R22.

Due to R22 is order gas may used more energy to keep cooling the room, but still much comforted than R410a non-inverter, unless you guys can accept cold like freeze room.

Much useful in the markets was R410a inverter and R22 non-inverter.

The new R410a non-inverter more suitable to install at living room and dinner for family type.

Not to mention that R104a is much more "greener" than R22
R22 technology is minimal 15 years old man.

just installed MHI SRK10YL. My impression is, the unit got vibrating noise.. the plastic is kinda flimsy.. but at night operation, becos it is cooler, so the compressor not running or running abit, the unit is pretty silent. I mean the indoor unit, it get some clicky noise when the unit running high speed.

Btw,  if i set my unit to right corner, if i use the 3d auto function, will it still blow in every direction? and the unit cannot set like i don wan full swing, i wan half swing only..