In process of learning to tune a Super XX chassis for technical setup, and at the same, build a MA chassis for the upcoming Speed Houz race ( long jump + super climb circuit ala Japan Cup 2013 track ).

I'm so pissed with screwing stuffs, especially when screwing an underguard + plate + roller + weights etc. Seriously thinking of buying an electrical screwdriver next month. I've read around, seems that for such work, a low torque one is a better choice. Maybe next month jalan2 at Ace Hardware near Ikea to see the prices.

Super XX is best for technical and semi tech tracks. Usage of roller front and rear with rubber rings is recommended. More weight up front is recommended too since the motor is at the back (it is better to have the front end fall 1st after jumps). I might start building my Super XX after i'm done with my MA for the Speed Houz 28th December race (if i'm entering it lah). Thinking of a way to do a custom front end + side hanging damper for the Super XX.

I prefer to have the front lands first because the front wheel will land and starts to propel the machine, and when the rear tire lands next, it'll push the machine further. 4wd mah! Hehehe!

Work In Progress : MA Chassis for semi speed / speed tech track setup.

Toa Cheng, why are you not responding to my SMS since morning? Call pun tk pickup.

Guys, any ideas about shorten chassis length? What will be improved, cornering speed? Tq.

Dang it. Sunday's race by Ampang tamiya held at LTP.

Chassis used was MA. Mach Dash. 12-13mm roller front with 1.5mm HG plate. Front underside guard. Side mass damper used was the AR HG side plate with I think 4 gram dampers. Rear end : MA sliding damper with 19mm rollers with plastic ring, underside was 13mm ringless roller (so that when the top side roller contacts with the track wall, the 13mm roller will guide it.

1st time attack : fly off at LC (LC was near the last corner bfr starting area)

2nd time attack : changed to Light Dash. Added more weight at the side with 2.5gram dampers on each side. Flew away after the 2nd jump.

3rd time attack : changed to Hyper Dash. Added those 4 gram weights on each side (near the wheels) on the front plate. Flew off again after landing from jump and the left rear screw hole for the 13mm roller broke!

Is it because I added more weight to the car?

Hi guys. Need some help. I am seriously looking for any kits that comes with reinforced super tz-x chassis, or just the chassis package (red and white color) item number 94828. Tq!

Speed Tech race this Sunday!

Hehehe, done shopping for hobby tools! Once I got 'em tools, it'll be time to cut my MA Chassis and continue my MA Chassis study!

Nice idea on reinforcing the front bumper of your Super II! Got myself both the Vanguard Sonic and Victory Magnum Super II carbon reinforced chassis version. Gonna do one of them for semi speed whilst the Gun Bluster Cusco Special might be modded for a hybrid semi speed + speed tech machine.

But my hobby tools have arrived! RotaCraft mini rotary tool, Olfa Hobby Saw, Olfa Pro Knife and G-Temple Super Sharp side cutter! Hhmmm. Should I focus on my Project Alpha MA Chassis?

aiks toa cheng jual meh

Soulfly, u can also use this setup : solid aluminium wheel with super hard front + carbon wheel with clear soft slick tire.

toa cheng, kasi weblink machining tool tu. berminat. kthxbai.

Italian setup for rollers is standard 6 rollers max.

Check the Speed Houz track setup properly yaaa...

Oh Toa Cheng, gimme the weblink for the machine tool. Very interested.

Oooo taobao. Acane mau bring it to Malaysia. Tak tau.

Local agent... hhmmm... that one need to ask around. thanks!

aiyoo brp kali mau cakap.

check the Speed Houz track setting properly.

it is certainly not Italian speed setup.

oooiiiii me no otai.

when the track setup pic first came out i oso think... oooo italian. but then i reviewed the pic again thoroughly... eh this is no italian setup, italian setup mana ada jumps etc.

pastu i go Speed Houz and chat with Jai, confirm no italian hehe.

eh apa ni white MS chassis? PC - ABS chassis ke carbon reinforced one?