Morning to all racers,

Yesterday didn't go to Speed Houz since my cars (chassis S2 n MS), both just counting time to split into 2 half
Instead, I went to my frenz house and had a 'break-in-tamiya-moto' session.

So to share, let start with the tools/items required:

1) New motos (I breaked in Mach Dash Pro, Power Dash n Sprint Dash)
2) A piece of cloth
3) Singer Oil (Muchmore moto oil for me doesn't really do the job, may b lain tgn lain gaya)
4) NITRO BUSTER (u can use SC99 n etc, but by using NITRO BUSTER, ur moto is well maintained..in a way)

Reminder to all racer which decide to use NITRO BUSTER 600ml, price range is roughly around 25 - 28 inggit (below 30) only, I bought mine at RC shop in OU (thanks to TOA CHENG for introducing it to me) but my frenz accidentally bought it at 49 inggit (malas nk mention kedai), so plz b careful !!

Now, let the break in process begin:

1) First, using 2 bateries, let the moto run until it's hot (how long usually depend on the moto)

2) Once hot, take that moto and spray the inner part (via top n bottom holes of the moto) to wash/clean away the carbon wastage using NITRO BUSTER and cloth (u will see black-shinny-dirty-tiny metal stuffs coming out from ur moto)

3) Next, once u feel that the inner part is nicely cleaned, use NYET NYET (4 bateries holder) to pump the moto (during this process, u need to check how the moto accelarate, make sure that while moto is running, no waving sound. Then, when u pump it longer, screaming-like sound is achieved  )

4) if u feel the sound made by ur moto is still rough n wavy, redo the whole process.

5) So final result should have this criterias- make sure waving sound is gone, less vibration n screaming sound achieved. Like mine, when I put the break-in moto back in my car, the different was huge !!
Just to share my way of break-in motos (which works 4 me).
Eventually, everybody has their own method/style/skill (aku dgr siap ada org pakai IMAX tuk break in moto  ) but all is done to achieve the same goal   

HAPPY BREAK-IN