i nak gi shopping boleh?

It is 4mm...I manage to find 1 in a hardware shop....hidden in the back of the shop (only cost me a few buck)
usually, the smallest, most hardware shop would sell is size 5mm

Howdy from Brunei taiko2 dan sifu2 sekalian..

I've been a lurker here in this forum for a while, learning bits from everyone.

Like everyone, I just started back this childhood hobby.

Here is my car which i build after gathering knowledge from all of you for this fun race tonight which will be Semi-Tech (Semi-speed?)

I added front and rear brakes, roller depan 19mm with angle adjuster set at 3° due to the track mlm ni bnyk LC.

Kalau ada yg kurang atau salah, tolong tunjuk ajar ye sifu2 sekalian..  

And bought this tools for installing it.

hehehe.....cost of having a hobby 

I did the same (siap beli heavy duty driller RM200)
Takda hal as all these will come in handy...yg penting, HATI PUAS   

I saw Tamiya Basic Tools macam tak lawak and professional. So I buy Pro's Kit tools made from Taiwan.

Aren't so far most preferred chassis is Super Chassis 2 and MS Chassis.

Care to share what's the meaning behind full tech track and semi tech track?

Thanks

yup... that's a new track just recently opened, but not yet 100% complete. Still in testing phase because the tauke still waiting for more track parts to arrive.
haven't been there yet though.

got pics?...share the track layout n ur car setup la   

TU track is still super duper speed bro...they having speed race this coming 23 Feb

I'm not joining the race but will b there to support few of my frenz...JOM !! wanna see all the super duper speed demon performing

Kt opis ni buat stress lak aku...tk leh view pics dr dopbox

takda hal....semi speed ni cam2 blh buat/improve

ada org, push speed 1st, later check/improve on stability/landing...some setup car to get optimum of stabiity/landing 1st, later push on speed

work to improve   

hehe...dh try dh..mmg tk leh....may b IT dh block

pakai enjin apa bro?

parts arrived
time to setup my semi speed.
woot woot.

segan.
sini so many otai.
haha i small fry.

hehe...u can try on your own...abe faisal also posted '5 minit besama abe n tamiya' - how to break-in moto

check it out n can try doing it.....selamba je 

aku tgh tunggu ji3moon siap kete ni.....tgn dh gatal nk lenjan SII ngan cowling special RARE edition Ray Stinger

nk pakai power dash...nk lenjan nnt br break in moto (nitro buster pn dh nk abis, kena singgah OU blk ni)

Otai2 ke, sifu2 ke.....everybody starts somewhere.....takda hal nye...yg penting  to all

RC cleaner tk penah try since budget tk mengizinkn

SC99, MCKENIC, NITRO BUSTER n 1 jenis TUBE ala2 biru yg penuh ngan tulisan cina (tk sure brand apa tp bau busuk ckit), semua dh try n nitro buster ngam2 just nice

plus, kalau main selalu n each time blk cuci enjin (2 3 enjin lak tu).....1 tiub hardly can survive for 1 week  ...kokak wallet 

yup...cowling ptg2, semlm siap fine tune

nitro buster blh beli kt kedai RC One Utama..area POS branch

oh...ni dh penah diskas dh ni...soulfly brought up the issue last time

1) rendam dlm zippo: to avoid rust buliding up on ur bearing

2) apply minyak singer: to apply lube to ur bearing

so....lps lenjan ur kete......then nk rehat 2 3 hari...make sure u barai ur car
all the unused bearing, store in botol kaca ubat (yg sdh dicuci) sambil berendam dlm minyak zippo

then...when time wanna use them back.....bring out the bearings from zippo filled botol, spray RC CLEANER/SC 99/NITRO BUSTER (to clean off any dirt residue)..... apply some lube (minyak singer/tamiya lube n etc)......spin ur bearing at moto shaft.....n finally pasang blk kt kete

all this is done to maintain ur precious bearings (bkn murah tu)

liquidvamp .....jgn borong sampai abis lak...simpan tuk aku n roon nk beli later

TU located at new wing, B2, turun ikut escalator dkt ngan studio R

u staying in sunway/subang ka?

im nearby.
haha when u wana setting lmk la
need a place in subang la. no port ;(

regarding AKD.....what is the best chassis to install it upon?

SII seems a bit fragile to have this advance-futuristic-bulky bumper to be installed to it

not sure 'bout VS but SXX chassis seems strong enough to support it

Appreciate any comment. Thanks