Just gotten my FWS C40 and rest C30

Crazy good against sun, however was regretting a bit as had issues on smart tag.
And since New tint, advised not to wind down window so opened door

However after few days, smart tag working without the need to wind down window.

i'm actually hoping that to be the case as i tinted c40 front and rest all c30's LOL

Aye, my self justification for burning my wallet for branded tints

no issue from me for Huper Optik on 2 vehicles.

Didn't face the issues mentioned in your links.

my Sister's new Persona just tinted with Rayno S9 series full car with 50 in front/driver and passenger and 20 in rear/left right passengers.

https://www.raynofilm.com/automotive/phantom-specs
specs vs Huper Optik on my 86
http://www.huperoptik.com.my/product

name/model	VLT	VLR	IRR	UVR	TSER
Rayno S9 50	50	6.2-6.3	92	99.9	53
Rayno S9 20	20	5.1-5.4	93	99.9	64
Huper Optik C30	30	12	86	99	63
Huper Optik C40	42	9	80	99	55

Pricing wise S9 is actually on par/more expensive than HO, however with ongoing promotions/incentives to enter the market as a newcomer, they are usually few hundred cheaper.
Example: HO Ceramic series full car about 1.9-2.1k
Rayno S9 will be about 1.6-1.8k

Haven't really driven around under hot sun, so user review to be posted a bit later.

Too dark too low VLT you'll definitely affect night visibility.

And don't think it's only your vision your safety.

Example: if other car cannot see past your rear window that cars in front has stopped suddenly prompting you too stop suddenly, they will bang you.
Imagine it's a big vehicle that cannot stop in time and due to weight, force and momentum greater, more severe impact.

Vehicles behind must be able to see past your car. Worse if you're tall SUV.

even side windows matter! Your side mirrors visibility is important as well when you're overtaking/checking blind spots.
You can say it's motorcyclists fault if they bang you, but your car still damaged and it'll still suck, no?

=Edit due to phone auto correct errors=

Also, car look like seafood or not, should be the least of your concern when it comes to dark tints

This post has been edited by Quazacolt: Mar 2 2022, 02:54 PM

My sister's Persona Rayno very good.
Very cooling even under hot sunny day comparable to my darker looking Huper Optik.

Not sure which model she gotten though, VLT definitely much lower than 80 (as in 80% visible, not 20% visible, unless your 80 is terbalik spec and only 20% visible super dark tints )

I recommended her to Kepong rainbow as that's where I done my Huper over 10 years ago.

She self paid IINM 2k ish (or just slightly less than 2k introductory price?)

Not through Proton SA

police jpj cant see you, issue saman, go puspakom check, tear off, become 0 layers.

if you up for that risk , by all means go ahead

Just the interior lasting longer avoiding damage from heat and sunlight, is enough reasons for me to always go for good branded reputable tints.

I've been on Huper Optik for Iswara, Eco Tints (stock tints for-) Proton Inspira, then my GT86 went with Huper > then eventually currently today SunTek + Llumar + Huper (only the rear windscreen remaining)

My old 2013 300k GT86 plastic trims are still, ok ok, and I think tints definitely contributed.

Never degraded throughout my usage

I'm a Llumar user since 2022 till now, 3rd or 4th car tint with Llumar already, latest being CRV with latest titanium 8 package (T8-35) where the side windows security film are 8mil thickness (visibly thick when looking from sides against the window glass, crazy)

and these new tints, have new guideline of up to 60days (3 months) curing time:

with that out of the way.

1) issue with your tint(or installer)
I previously had AIR50-65 (if i remember correctly) and now CTX50 also no issues with smart tag ever.

2) installer fault, but give them chance for the tint to cure, if after a week or 2 still same, go back claim. Llumar have between 5 to 10 years of warranty depending what package you gotten.
my current Titanium 8 is 7 years
previous TCP6 is 5 or 6 years.

3) ya please refer attachment.
however if it's an OBVIOUS bubble, and ESPECIALLY if you can see a speck of dust or dirt within the center of the bubble, then no curing will work. it'll be permanently there.
hence in those cases, claim and re-do.

Pinnacle is not security tint right?

If so, curious, because not confident with titanium 8?

I see.
Btw you mean 4mil?
It's not exactly 4mm, and it's some weird confusing designation lol
Imagine titanium 8 being 8mm, almost one cm
No way man

Yes I think titanium is performing better than paper specs
But, it's thick lol
You can seriously see (and obviously feel) the thickness at the window edges

=edit=
ok i just googled, and thankfully Llumar got added the micron rating

Tint mil	micron	metric
4mil	100	0.1mm
8mil	200	0.2mm

This post has been edited by Quazacolt: Oct 21 2025, 03:12 PM