Hi, Our new branch 3M @ Bangsar is opened (Main branch 3M @ Ampang).
You may visit here for more detail
https://forum.lowyat.net/index.php?showtopic=3427813

Special promotion only valid for first 30 cars from Lowyat.net.

This post has been edited by 3M_Bangsar: Dec 2 2014, 03:28 PM

Hi Sir,

For front windscreen you can choose our 3M Ceramic 75 series which have no problem with smart tag. And the side using Nano series.

Spec for Ceramic 75
(72% VL Transmittance , 40% TSER, 44% IR Rejection, 99% UV Rejection, 19% Glare Reduction)

Spec for Nano 70
(66% VL Transmittance , 50% TSER, 97% IR Rejection, 99.9% UV Rejection, 22% Glare Reduction)


The one with smart tag issue will be crystalline series which have very high IR Rejection which cause Smart Tag that using Infrared to work. As you can see at below the IR rejection at 97%, so you have to compromise the heat rejection with slighly lower spec film so that smart tag can be work.

Spec for Crystalline 70
(68% VL Transmittance , 50% TSER, 97% IR Rejection, 99.9% UV Rejection, 22% Glare Reduction)

Our shop located at Bangsar. Already Pm you more detail.

This post has been edited by 3M_Bangsar: Dec 3 2014, 11:44 PM

Thanks for your feedback, Customer satisfaction is our first priority.
Hope you enjoy your cool ride.

Regards,
3M Ampang / 3M Bangsar

Not recommended to install tint on cracked windscreen as the crack may get worst and you will wasted your tint on it. Better replace it if you want to install tint on your car.

Depend, if those below rm300, better don't as usually with such price you only can get colour film. Later 1-2 years you need to spend another rm100-200 just to remove the film. But if you just need safety feature not the solar feature, then it's ok to go for it.

Hi, We have 2 branch as below

3M Bangsar
Fortitude Auto Sdn Bhd (939380-x)
No 19, Jalan Bangsar,
59200, Kuala Lumpur,
Malaysia
GPS : 3.129162, 101.680107
Google Map Direction
(Landmark: Between pizza hut and shell station at Jalan bangsar main road)


3M Ampang
Fortitude Auto Sdn Bhd (939380-x)
115a, Jalan Kabus, Kuala Ampang, 68000,Selangor
(Along MRR2 mainroad, 800m away from Flamingo Hotel.)

This post has been edited by 3M_Bangsar: Dec 15 2014, 01:51 PM

Hi, you may see all the 3M Autofilm spec in my thread below. There is a comparison chart of the autofilm and you may click on it to see the detail.

https://forum.lowyat.net/index.php?act=ST&f...3&t=3427813&st=

Hi, We are doing Chinese New Year promotion in conjunction of new opening for 3M@Bangsar.

Get FREE Body Glass Coating worth Rm2300 for any purchase of 3M Autofilm for whole car. Don't miss the chance to save more.

Feel free to pm me for more detail or quotation.

Regards,
3M Bangsar

This post has been edited by 3M_Bangsar: Jan 22 2015, 05:41 PM

We can't install in outside as the tint will easily spoil when we wash car and expose to weather.

No advisable to apply second layer on existing tint, as you will void the current and the new tint warranty. better just remove it and install a better tint.

All 3M autofilm include crystalline is come with 5 Years warranty.

If overlapping for sure will void the warranty as if somethings happened,the old tint will blame the new tint, and the new tint will blame the old tint and it's never ending. So no company will provide warranty if product installed on the same windows is come from different brand.

We can do overlapping for you if you insist to do so but the risk will be on you. Hope this clear your doubt.

Yes, 3m Nano series do not have the 3m watermark logo.

A safety film should shattered at the point of impact, but the shattered glass should be holding by the film and wouldn't fall in whole piece. Not so sure why the whole glass came down, perhaps you should ask for explanation from the installer.

Do you mean 3M autofilm? 3M crystalline will not work for smart tag due to 97% infrared rejection, you may use 3M ceramic 75 at front windscreen if you want to use smart tag. And all 3M film will have no problem with GPS as 3M autofilm is not Metal base film.

Maybe you can pm me your car's modal so that i can give you our best offer from 3M.

Do you mean 3M autofilm? 3M crystalline will not work for smart tag due to 97% infrared rejection, you may use 3M ceramic 75 at front windscreen if you want to use smart tag. And all 3M film will have no problem with GPS as 3M autofilm is not Metal base film.

Maybe you can pm me your car's modal so that i can give you our best offer from 3M.

Do you mean 3M autofilm? 3M crystalline will not work for smart tag due to 97% infrared rejection, you may use 3M ceramic 75 at front windscreen if you want to use smart tag. And all 3M film will have no problem with GPS as 3M autofilm is not Metal base film.

Maybe you can pm me your car's modal so that i can give you our best offer from 3M.

3M do have crystalline 90 with spec below

Crystalline 90 (86% VL Transmittance , 34% TSER, 90% IR Rejection, 99.9% UV Rejection, 3% Glare Reduction)

But as this film have very less demand and people only want to install at the front windscreen only. So the left over after cut out for the front windscreen will be waste as no people want to install at side windows or others place. So we didn't order and sell for this crystalline 90 as it will take very very long time to finish up a roll of film and we will also charge higher then usual as the wasted left over we will charge on you.

Maybe if there is enough demand like group order or bulk request from here, Yes we can order it and supply to you all.

I can say 3M crystalline 90 is one of the best you can find in term of heat rejection (34% TSER) with such high 86% VLT. And the only choice if you want to compliance with JPJ.


This post has been edited by 3M_Bangsar: Mar 20 2015, 02:31 PM

double post sry

This post has been edited by 3M_Bangsar: Mar 20 2015, 02:30 PM

New JPJ compliance film available from 3M

3M Light Shade
Light Shade 80
(85% VL Transmittance , 25% VL Reflected, 20% TSER, 99% UV Rejection, 3% Glare Reduction)

Smart Tag and GPS friendly

3M Product Comparison

Promotion


This post has been edited by 3M_Bangsar: Apr 2 2015, 11:46 AM

Sure you can remove it and tint again. But of cause you have to bare the cost.

And also it's not advisable to add on second layer as it will void the 3M warranty.

I can give you Rm600 3M cash rebate voucher. Want?