hi.. got my new car about 2 month now.. still have not do anything yet except weekly washing at car wash... how should 1 start ?? should i start after washing-->dry--> clay ??? --> wash --> dry --> wax --> dry --> wax --> dry --> wash --> dry ?
Interesting demonstration although I do not know how many commercial hype is involves.
g88 Do we have water filter that has ability to do water softening in Malaysia? Are those less than RM100 water filter like the follow: able to achieve water softening? This kind of filter easily obtain in normal store or shop and the filter core also very economic. If it can do the job then it is really worth.
your picture is a normal water filter lad .. not softener.. if wan softener then use the FRB type but expensive and not suitable for home use (drinking or cooking) .trust me, I am in industrial steam boiler line
Trust you then. Then what option I have in Malaysia?
Sometime I see some houses outside got this big tanker thing:
These are water softener right? Are this suitable to use? Roughly how much damage will be on our wallet?
The one out side house one is just FRB or SS tank fill with sand and carbon.. mainly to remove chlorine and mud.. if water softener will fill with 100% resin or 70% resin.. further more you need to re-generate with salt to recharge the resin..backwash and most important you need to buy a test kit to check water quality
» Click to show Spoiler - click again to hide... «
Is that means one can just buy the resin (wonder how much it costs) and put it in any long height tank and just simply water flow through the resin will get the process done?
Why the picture you post got a electric supply for the device? Not just flowing water only?
Seem like a very cost demanding device to use on a long run.
You need to put in a close tank.. water pressure is need to push though about 45 Psi. the picture i post on is an auto regene aka re-charge resin, back wash and auto run. You also need to buy industrial salt to re-charge resin once the resin charge no more by using test kit. No worth to go though.
I think the reason I care about it now because I suffer from the effect, and the effect is something I can notice it. My shampoo effectiveness reduced, and it happened quite a lot of time recently compare to old time. I don't know why, but this change of water quality definitely dislike it. If the water softening system is like RM3K and one year change once only, then yah actually I will invest into it. because not only can use for wash car, other home usage also will be benefited. But heck now I know that it needs to be recharged every few days interval and the recharge concentrate salt solution need to buy also, then it becomes too unaffordable for my current financial ability. Even if I won a lottery and can own the machine at the beginning it is still unaffordable in the long run. So got to call off the idea, at least for now.
Another reason is simply for sake of knowledge & curiosity only. Knowing more will not harm mah, right? Maybe one day in future got salesman come promote me water softening system and claim something like buy once never need to invest into recharge the resin again, then I know this is a con.
Never buy softener for home use BUT water filter is GOOD enough
If you mean this one then yes I have. What do you want to know?
But, in general, don't like the gun...bought it for RM60 & sold it off soon afterwrds. Uses too much shampoo and put out too little sud/foam.
the one i have is grey colour which it come with K2 car kit (0.3L) .. thought of :
step 1 Pressure jet wash (rinse with water) step 2 Hyper wash with foam gun .. leave it for 5- 10 min .. and let the product do their work with out using mist to buffet it. step 3 Rinse it with pressure jet with water. step 4 last use M115 for final clean and buffing
above is full lenght of cleaning or
hyper wash only or M115 only or combine both as mention above
This post has been edited by TamiyaOne: Aug 12 2014, 02:47 PM
Yeap, i have the grey one. Here were my RM0.02 : You probably meant D115. Meguiars recommends to use on a dry surface, to prevent further dilution of product, saw it on the Megs forums somewhere.
If you're worried that the car is too dirty, skip the D115 and do a 2 bucket wash? But honestly the D115 can be used on rather dirty cars, just use it wet by spraying more product and use lots of towels.
since got karcher foam gun.. thought of hyper-wash it then use M115 as final warp ... or it could be waste of M115
this hyper wash dun know got wax look finish a just like M115 or M 156
This post has been edited by TamiyaOne: Aug 13 2014, 12:40 AM