any grade of any gundam is possible ...
i dont see if they have problem making mg kshatriya .. probably bandai just dont feel like it ... haha..

no such thing as complexity or too technical or difficult for them ... they always have ways to make it ..

is there any alternative top coat that all you sifus use beside mr. top coat?

im not saying ur mouth is sour. im saying u r setting up urself for disappointment and eventually leave a sour taste in ur mouth.

while it may or may not hold true to u, but ur post suggest otherwise. U urself may not be a fanatic, but there r such ppl lurking and/or posting. U may not be disappointed, but ur post gives such ppl hope. U r setting up their disappointment. There r tons of fans who begin with such expectation, who truly think that in due time everything will be made and every kit that u dream off will be true. It all starts from having an unrealistic expectation. Such fans ultimately turn into whiners after years and years of constant disappointment, got piss off and leave the hobby, and in doing so scaring new ppl away.

Just look at gundamguy blot post or youtube post. How many of them r whining and complaining "Where is my xxx kits", "Screw u bandai, giv me my xxx kits", "u suck bandai hu the hell cares for xxx kits, i want yyy kits", "im not paying bandai a single cent if tey don make zzz kits".

All im doing is to give reason to why such thinking is unrealistic, give reason as to why such and such kits will/wont be made. Tone down ppl expectations inject reality and induce crtical thinking. i donwan this place to degenerate into such a cesspool

guys, just wanna ask, for those who haz completed their MG Gundam 3.0,
do you use the included stickers inside the box? 


cuz i cannot find the seperate water-slide decals selling anywhere at all hobby shops (they say no stock)
cuz i am used to using those water slide decals on my gunplas lol, since i always apply Mr Mark Setter & Softer to the decals...

anyone put the included stickers onto the 3.0? will it still look nice like the water slide ones after apply and topcoat?
sorry i've no experience with normal stickers , i can't apply the Setter and Softer on em right? 

//but when i see the cuttings on the stickers, it's really not bad, it's already cut to fit the sizes on each part >o<
need advices lol, shud i just apply the stickers or just scout around hoping they got stock? ((

Thank you.  Nic, how much thinner ratio should I set for that?  Paint 1:2thinner ok?

anyone has better way of masking a certain piece for painting different colour (or a totally different method?) ?

for example the proto zero wing below (the fin is different colour than the other part of the piece) (rightmost in the pic)


or the front skirt (bottom left in this pic)


coz now whenever i mask and do airbrush, the paint is not perfect, and i have to mask and fix the area again...really tedious work, not to mention so area are hard to mask as the surface really uneven.

conventional masking tape, as those are cheaper (much cheaper) to be used and disposed compared to tamiya one,
it can block the paint quite well on unwanted area.

I did use toothpick to press down the side, just that in the end, it always tend to be not perfect after airbrushing.
some seniors told me to use enamel paint to handbrush the different color part after laying the primary color.
and if u look at the pic, the front skirt upper part is rinse up, which make the masking abit hard.

i think a lot of people opt for mechanical pencils.. not sure how effective those are as i've never used them.. you can try artline drawing pens.. as small as u can find, i think the smallest in stationary stores are 0.1mm

gold i try before. nice effect. still not enuf shiny thou. Silver i go for sharpie 

but i recommend use sharpie bcoz the tip is smaller. artline tip is too big for small detailing usage

that looks like this beast..

This looks friggin good leh. How much would it be priced?

I'm from Muar actually. But shops here are seliing it more expensive than melaka's.

Ever bought from taobao before? Price is so much cheaper even compare with seller from here. I'm looking at MG age-1 Titan and its less than 170rmb. After conversion will be less than RM100. 30 to RM40 cheaper.

Shipping for 1KG is only RM9.5.    I will buy a cheaper one to see how is the quality. Some of the sellers in taobao do take extra care in their packaging.

taobao is actually ok..prob is with the agent..cos i saw the seller got bubble wrap..but my agent remove it to reduce volume weight..
brought banshee ver ka and xbone x2 from there...hence bent box..not damage, just bent
coming in xbone x3 ver ka and some metal bits (which so much cheaper when comparing to ebay)

I think cheapest MG should be from G Gundam line. If now mistaken MG God Gundam is around RM80 something...below 100 la simply put.

shhhh shhh.. let the rich girl talking... shhhh

wanna join

guys
guize
guisez

1/48 mega size > all

how the hell did you guys get backlock from Gunpla? I buy one and finish one, won't buy the second before the first one is complete.

scared no stock mah, fast fast buy n keep

something from HLJ
bought since Black Friday sales

More Bandai Limited.


Some how i'm hoping this could be normal release instead of Limited..
Love the color.

ah, right.. i remember reading about the reissues now.. i suppose that is a more sound business strategy, so as to not overstock and make losses.. but some so called P-Bandai exclusives should really get a normal release, like the Rebawoo.. it really stands out and is different enough from the Bawoo to warrant a proper release