now still can order...faster if u want
pure acrylic lah...cheapest LOL!
u want acrylic alu hybrid is USD$130 if ayam not mistaken.
got a lot of colours to choose from...haha

ur internet wan...i think need a bit more information like whether is it static IP or dynamic IP.
if it is static IP, what is the IP address, gateway, etc.
need more time to think lol
probably it'll be easier if i can remote into ur pc to check the configuration page.

my bad..actually both side of the shift button..what happened?... 

Does your enter or shift key have any stuck-ing feel when pressing?

Deswai I always suggest Costar stabiliser whenever possible.

Btw, try to get a syringe and some plastic safe lubricants. Inject a little to the stabiliser slider or whatever part which you see it moving when lifted. The worst, try reseat the stabiliser or even replace them.

Uit, mana siggy? Kena potong ka?

justnits, USD 80 including shipping?

hi guys, i was wondering whether there are *mechanical mouse* 

The left and right button uses cherry mx switches 

Deswai I always suggest Costar stabiliser whenever possible.

Btw, try to get a syringe and some plastic safe lubricants. Inject a little to the stabiliser slider or whatever part which you see it moving when lifted. The worst, try reseat the stabiliser or even replace them.

yess..right side shift..ada mcm senget a bit..hmmm..u have same problem haa?..aiyoo..ahahahaha 

my bad..actually both side of the shift button..what happened?... 

Deswai I always suggest Costar stabiliser whenever possible.

Btw, try to get a syringe and some plastic safe lubricants. Inject a little to the stabiliser slider or whatever part which you see it moving when lifted. The worst, try reseat the stabiliser or even replace them.

nope, not including shipping yet

I only have the problem on enter key, both shift keys are ok. Actually just to ask if this is a problem of new batch of poker2 or previously also like this  .
Alright  , i might eventually buy costar stabs to replace them when changing plate.
Either its really ikbc QC lousy or this just common on cherry stabs, but my TK all butter smooth with cherry stabs also  .

I only have the problem on enter key, both shift keys are ok. Actually just to ask if this is a problem of new batch of poker2 or previously also like this  .
Alright  , i might eventually buy costar stabs to replace them when changing plate.
Either its really ikbc QC lousy or this just common on cherry stabs, but my TK all butter smooth with cherry stabs also  .

For qc, the key still in the tolerane limit, that's why still distributed to consumers.
For polymer, either during shipping, the key is heated or kena UV radiation (sunlight), so the property is modified.
So, probably warpage is happening during shipping.

ps: experienced of manufacturing engineer, with the knowledge of materials engineering/quality control/polymer engineering

Which color you get? I search for a side view photo but I can't find. Top view can be deceiving.

eh i forgot u want 60%
it's cheaper
acrylic is USD$70
polycarbon is USD$120
acrylic+alu hybrid i not sure, i think should be about same price as polycarbon
full alu is USD$150

dun have picture of side view
jahat punya sprit dun wan to show yet because he dun wan ppl copy his case

Hmm im not sure either,  the packaging is full of bubble wraps so i guess its less likely to be damaged since he also have similar problems. Unless its caused by huge vibration imo.
Nevertheless the stock keycaps are very good, but the RGB included is quite disappointing in terms of quality thats why i get myself extra keycaps first. I stil prefer tehy just gives blank RGB instead.

Deswai I always suggest Costar stabiliser whenever possible.

Btw, try to get a syringe and some plastic safe lubricants. Inject a little to the stabiliser slider or whatever part which you see it moving when lifted. The worst, try reseat the stabiliser or even replace them.

Spacebar and enter key of mine is like that.
What I done is
Blow with hot air (soften the key) using hairdryer to the key, then adjust slowly in.
Do not force the key fully in. Adjust slowly in..
You will reach a point where the key bounce like other keys. Then when u satisfied only stop.

My finding is the key is slightly concave, compared to normal.

So, the key experienced high downward force than upward.

but..when i change the shift keycaps to the original white one..it work normal now..weird haa..i guess the extra green shift keycaps got problem..but i don't know where the mistake..don't see any difference...

Oh, so your problem actually boy with the stock stabiliser or stock keycaps, but the extra RGB?

so where is this stock stabiliser and stock keycaps located?..RGB?...