Always fancy those LED strips on luxury cars like BMW, Mercedes Benz, Audi and others?
Want a LED strip for yourself?
In love with those LED Daylight on Audi cars which turns orange when their signal is turned on?
Well, no need to dream anymore, I am here to provide you with a solution to your dream

Chip On Board ( COB ) LED Strip with Turn Signal Function
- This is not CCFL which does not last as long as COB LED
- CCFL consumes more energy than COB LED
- Comes with 3M Adhesive

This product is flexible too, so no worries about damaging it :


This is what it looks like when you driving or when you start your car :


This is what it looks like when you on your indicators :


Price : Available in 2 lengths :
- 60cm RM 120 per set ( 2 strips )
- 85cm RM 140 per set ( 2 strips )

Warranty : 3 months

ITEM IS PRE-ORDER, FULL PAYMENT IS REQUIRED AND WILL REACH WITHIN 5-7 WORKING DAYS!

This post has been edited by xzation01z: Oct 13 2014, 06:52 PM


Attached thumbnail(s)

Here are some photos that have been installed using the LED strip :

Kia Forte


This post has been edited by xzation01z: Dec 15 2013, 05:14 PM

bump!

bump！

interesting how to install no need any wiring?

Interested.. Can have more picture on the product itself?

The material looks like PVC rubber?

hi xero, wiring is normal for positive and negative wire, for the signal function just connect it to your signal lights then done, when u on ur indicators, the led will blink in orange too

hi bro, the material indeed is pvc rubber, that is why it is flexible

hi bro, more pictures attached above, please have a look

Not bright enough during day time.. If night time then ok..

For COB type LED, this is considered bright already, unless those hawkeye or projector led those will be very bright during daytime

Ok. Can it be cut if i use less than 60cm each side?

yeap, it can be cut bro, no worries

My question is how to get it into the lamp and maintain its position? Doing something like this wont void warranty as well?

this is not applied inside the lamp bro, just stick on top of it using double sided tape and no it wont void warranty

Let say i buy the 60cm one. I cut into 2 pieces, 30cm each, and a little bit of soldering n such, can that 2 x 30cm useable? If yes, then I'm really interested.

hi bro it can be cut at intervals of 3 led per cut

any installation guide?

There are three wires, black and red would be for positive and negative and the third wire is for signal function which is to be connected to your signal light on ur headlamp

How tough is the 3M tape ? I hope it wont come off due to heat or at car wash.....

do u hav a daytime turn on picture?

the 3M tape is good enough to hold the led strip, just make sure the surface is clean before applying on to it

hi bro, sorry I dont quite get what you mean.

is it possible to wrap this around headlights and then make a sort-of CCFL ring with it?

btw, is this brighter than a CCFL ring?

actually I got sell the ring itself, nonid to wrap so troublesome yes this and the ring I mention is COB LED which is definitely brighter and last longer than CCFL

Interesting. Do you happen to have a picture of the COB LED ring?

hi yes I have it, it is available from 6cm to 14cm in diameters

Looks good. Whats the price? Do you know any specialist for installation? Not sure if I can trust our Brothers. Haha

How much is the LED ring?

What's the size that I should use for normal Proton Gen2 headlight?

How to install?




This post has been edited by Kanuki: Dec 6 2013, 01:03 PM

price depends on the size of the ring, the ring is available from 6cm to 14cm diameter.

installation can be done at any accessories shop or u may diy urself
if diy shud be pretty straight forward, wiring would be the same as installing DRLs.

is it water proof ?

Yup water proof

how much for the COB LED RING? for nissan sentra n16.

Bro u have to measure yourself, price depends on the size of the ring, the ring is available from 6cm to 14cm diameter.

cool item!

Very nice, free bump!!

Thanks for the bump bro interested?

bro,plz pm best price plus postage to taiping..whic h one should i use for my honda city?

hi bro UGPM

For this Forte headlamp, how long is the strip that was used? Tq...

the 85cm one

you have any example of photo for honda city installation?
i would like to know how does it looks like.

hi bro, UGPM

is this bendable??

yup it is

any installation guide? or aid?

saga sv can ke bro

bro installation can be done DIY, just open up ur headlamp and shape the led strip however u like then just tap the wires to either ur parking light or battery if u wan them to be on 24hours

can bro, of coz can

bro any image saga use this thing

sorry bro, I dont have it haha but its flexible to shape however u like

bro i wanna give you a heads up on your sweet COB LED ring! here it is on my gen2!



looks sweet but then unfortunately I realise after 4 months (installed late December) some of the LEDs are already failing.



This post has been edited by NightShadow: Apr 18 2014, 01:26 AM

Bro pls pm me price n length of each unit.... has signal. Light also right?

how to make order and do u provide installation diagrams?
Postage or COD?

UGPM bros

bro do you provide installation or you know anywhere that does?

I drive vios, I want to install this into the headlamps

Bro pm me how much for cob led ring 70mm?