Always fancy those LED strips on luxury cars like BMW, Mercedes Benz, Audi and others?
Want a LED strip for yourself?
In love with those LED Daylight on Audi cars which turns orange when their signal is turned on?
Well, no need to dream anymore, I am here to provide you with a solution to your dream

Chip On Board ( COB ) LED Strip with Turn Signal Function
- This is not CCFL which does not last as long as COB LED
- CCFL consumes more energy than COB LED
- Comes with 3M Adhesive

This product is flexible too, so no worries about damaging it :


This is what it looks like when you driving or when you start your car :


This is what it looks like when you on your indicators :


Price : Available in 2 lengths :
- 60cm RM 120 per set ( 2 strips )
- 85cm RM 140 per set ( 2 strips )

Warranty : 3 months

ITEM IS PRE-ORDER, FULL PAYMENT IS REQUIRED AND WILL REACH WITHIN 5-7 WORKING DAYS!

This post has been edited by xzation01z: Oct 13 2014, 06:52 PM


Attached thumbnail(s)

Here are some photos that have been installed using the LED strip :

Kia Forte


This post has been edited by xzation01z: Dec 15 2013, 05:14 PM

bump!

bump！

interesting how to install no need any wiring?

Interested.. Can have more picture on the product itself?

The material looks like PVC rubber?

hi xero, wiring is normal for positive and negative wire, for the signal function just connect it to your signal lights then done, when u on ur indicators, the led will blink in orange too

hi bro, the material indeed is pvc rubber, that is why it is flexible

hi bro, more pictures attached above, please have a look

Not bright enough during day time.. If night time then ok..

For COB type LED, this is considered bright already, unless those hawkeye or projector led those will be very bright during daytime

Ok. Can it be cut if i use less than 60cm each side?

yeap, it can be cut bro, no worries

My question is how to get it into the lamp and maintain its position? Doing something like this wont void warranty as well?

this is not applied inside the lamp bro, just stick on top of it using double sided tape and no it wont void warranty

Let say i buy the 60cm one. I cut into 2 pieces, 30cm each, and a little bit of soldering n such, can that 2 x 30cm useable? If yes, then I'm really interested.

hi bro it can be cut at intervals of 3 led per cut

any installation guide?

There are three wires, black and red would be for positive and negative and the third wire is for signal function which is to be connected to your signal light on ur headlamp

How tough is the 3M tape ? I hope it wont come off due to heat or at car wash.....