I have see some people's casing is didn't install the side plate casing ( the 2 side steal plate ) .

So i do it like that until now, is useful for cooling your whole casing, but the problem is too many dust inside the casing then closing the side plate( all those ram, display card n other ) .

If i close back that casing side plate, the temperature will very high.

Any idea or suggestion for if i close back and the temperature low down ?

i have 4 main cooler in my casing ( didn't include cpu cooler) 1 big fan cooler at back & front , 1 fan cooler a back for exclude the display card heat ( because is install near the display card ) , 1 is at top casing, need to exclude or take outside temperature in to casing also can.

ps: i don't use water cooling. Is expensive to me.

probably ur fan full of dust, or bad cable placement
do some cable management, etc
as for me, closing the sidepanel gave beter temps than opening it
as i have 1x80mm + 1x120mm fan for intake n 1x120mm for exhaust fan



This post has been edited by e-jump: Jun 18 2006, 12:48 PM

Really or not , close side plate more cool then open it

Hmm maybe i try c c .

OMG your ram there also slot 2 small fan for exhaust heat.

Is all your fan is those normally fan or those very fast spinning 1 ?


And thanks the photo e-jump, i can try like that but the cable that connect those hd or cd rom, i cant use because my pc there is to narrow XD. i try again c

Thanks e-jump.

You don't really need a fast fan...
Yes, a fast fans help a lot, but, it must be very noisy...

You should just look for a high cfm fans with a low noise...

Take vantec, vantec uv led fans has high CFM with a lower noise level...

And you also have to make sure that u have a good airflow in your pc case...

Must have inlet and outlet...

Vantec UV LED has low noise level? Those darn things are bloody noisy ler.

Basically, it's all in layout and cable management. If the interior's untidy...even if put tornados inside also will be hot leh.

Previously, my casing only has 1x 12cm exhaust fan and 1x12cm intake fan (which is really for the HDD rather than anything else)....these are all spinning around 1000 rpm only.....no heat problem also.

Emm can u guys post some image that how u guys hidding power cable or how to planning the cable in casing ?

My pc those cable very messy there T-T

E-jump have hide the power cable but i dont know how he do that XD


My casing is "spiderman" side n top plate got spiderman icon there .XD


Emm may i know inside the casing temperature is how then savety ?

Here:
http://forum.lowyat.net/index.php?showtopic=200815&st=0

Basically the whole idea is just....
a) To look cantik
b) To get cables out of the way so nothing blocks the air coming in from the front of the casing (intake fan)....to the individual cooling fans like the cpu and vga hsf....and then out towards the back exhaust fan

Em i hav a stupid question ( i think like that ) .

How can i remove the front plastic of my casting, cus i cant install my cooler fan at front ( because cant scrull ) .

You have the casing wat....u shud be able to figure that out youself.

Or at the very least, post detailed pics of your spiderman lor.

i have broke my 1 casting before because of take out the front plastic.

Em maybe i cant post picture because didnt hav camera ....

Is easily c it at low yat last few year maybe.

Sniper do you any IDE extend cable connect your HD or cd rom ?

I see your cable is hide at back & turn out n connect those hardware.

Is those thing Low Yat got sell ?

If your standard IDE cables not long enough, just get the 90cm ones. They're inexpensive and should be readily available in most proper computer shops.

ok thanks Sniper. i have c your pc cable management picture there .

nice XD.

Em i have 1 question about the IDE cable, if i flip that IDE cable over here over there will make the cable broke ?

as long u dont fold it like folding paper, it wont

indeed i hide my cables to make my casing internals look neat
however, i manage the hidden cables too so it wont create a cable mess in the hidden area, that might beat the purpose of cable-management-for-better-airflow


so, its not about how many fans, but its about how good the clearance for airflow

This post has been edited by e-jump: Jun 23 2006, 12:25 AM

copy pasta

This post has been edited by e-jump: Jun 22 2006, 10:33 AM

ic thank you for your info e-jump.

Now i hide the ide n folt quite alot ....

maybe need use longer IDE cable for hide.

FYI, i fold IDE cable like i fold paper. still OK.