Mine ok wor
But the loading is fucuking slow

swap you also need to queue  

Just took back lala from SC "again" about 1 week this afternoon. Dashboard area sound they said fixed "something" behind the aircon. Eventually they dismantle whole dashboard and center area. 
Suspension area they add so called Mitsubishi damper(if I spell correctly) white color one to all 4 spring area.
the moral of the story, if you got time then only get lala; if your lala can park at SC for long time then get lala...

When car driving slow the center dashboard got irritating vibrating sound, when drive over certain limit the sound gone. I just took car yesterday and not sure whether that sound will gone forever or not ...

any1 want to buy inspira front fog lamp?

other than that switch/wiring?

My dashboard has finally stopped creaking.
Spent my afternoon wrapping every clip with tape and sealant, now its so tight and no noise at all even when you press it.

HU panel, and the silver trim, and the hazard switch.

Did not take photos.

Here's what I did.

Take out trim. Remove all white clips from trim. Add silicone sealant at the trim brackets and fix the clips back after sealant slightly drying. Then leave it overnight to dry. Next day put a layer of 3M double sided tape on top of the white clips, without peeling off the red plastic. I left the red thing on so that it'll be easier to slide in when fixing back the trim.

It was very tight and difficult to fit back because of the thick tape. You might face difficulty later if you plan to remove the trim again and risk breaking it.

K3 posted somewhere that he just removed the clips, added foam tape, and then put back the clips. You may want to try this method instead. I added another extra layer because I was afraid there will still be noise and didn't want to open up everything again later.

Airbag not functioning

Bring to SC to check

U touched something?