power cable    not diy by me though, just bought a DIY-ed product

yes  Noctua fan with 3 leaf broken  still a silent fan

---

Added on October 24, 2012, 3:15 pm
audiophile thingy don't have the best sound, only have the most suitable sound just choose which suitable for you

hi, may i ask why people always do alot of shielding on rca cables, or any cable that do connection between pc to dac, or dac to amp, preamp blahblahblah
then do no shielding on headphone cables?

oh, thank you very much for quick reply, was doing online shopping and figuring about it

going to buy poison thing together in 1 time from china    since i going to buy larger casing for my dac from there
or i will keep spend my savings nonstop 

Hi, heres my plan, I plan to make 2 meter cable for my D2000k
The cable will solder into 6.35mm plug and another side to headphone with 4% silver solder cream
Because my tube amp output is 6.35mm so i don't want any adapter between them


Any recommendations? Anything after 3mm sleeving will "stop" when the left/right cable split their way
I use thick anti vibration layer because this cable (silver plated teflon OCC) have stethoscope effect. I don't mind its thick or heavy

thanks for remind
hmm, have any recommendation for this design, if this design already good, then i will go for it

diameter 8mm, 3mm when split to left/right (without anti vibration layer)

loose cable  i'll post here for sure
its extra cable from people wounding high end transformer, the shorter the cheaper (1meter $3 3meter $15)
edit : total 8mm, loose cable 1mm*4

After reading here i decided to changed my design. What should i use to fit those empty spaces? Also, is braiding required in this situation?
[attachmentid=3236885]
EDIT: DECIDED DON'T USE 8MM SLEEVE.

yeah. i mentioned i've read this design :
http://www.canare.com/UploadedDocuments/Cat11_p35.pdf
Splitting the core can greatly reduce noise. there are graph inside 
Also, making cable like this can let me feel better because the L/R are totally splitted, just like RCA cables 

Can remove if its not nessery... will decide when i see the real material

hehe just finish it. looking good ?


_DSC0041 by Dennis Yeoh, on Flickr

using starquad l4e?

after realizing canare f-12 plugs are expensive...any other recommendations for plugs?

im sure they're good but right now im buying a superlux 668b and the cables are faulty so im going to DIY one. Does neutrick,canare etc. have 3.5 female plugs?

is it true they cost like rm20+ each? because thats what I read...

Hi,

May i know whats the main differences between Canare L-2T2S and L-2B2AT?

anyone can enlighten me? Thank you

hey guys what do you use to shrink your heatshrink? mine is like 125C and a hair dryer aint working and using the soldering iron makes it look really ugly

Here you go though I need to find a way to fix the female mini part where some of the wire exposed because i cut my heatshrink too short

The reason is that the female mini couldnt fit the cable sleeving and its the only one they had so I had to strip off more of the sleeving and cover it with heatshrink.

so i went at went to do a stereo left to right test...if sound come out from both sides does it mean i did it wrong?

and when i use audacity both drivers have sound when only in right channel and no sound in either when in left channel