less than 3 seconds each attempt

i tried switching the wires around again and than I made sure no solder come in contact with each other as well. But sound still comes out fine when listening to music so i guess i,ll just leave it at that.

alright will post a pic up soon as I get back home

As a person who made a cable and tried it on my superlux 668b the signature definitely is different depending on cable. Canare gave my superlux more prominent female vocals which stood out more while stock cables made instruments stand out more.

When switching from cable to cable the sound change is instantly noticeable if you know the song well.

of course custom cable im unsure of because I don't have other cables, but the stock cable itself is good. If I wanted to hear more instrumentals i would use stock and if I want to hear vocals i will use the canare cable. It's all about what kind of signature you want what you want to hear and how it corresponds to your taste.

Yes custom cables from other people are expensive because your paying for materials and workmanship despite what people say, if you can make it yourself than no one will stop you. Audiophile stuff is very subjective lets just say there's no RIGHT answer. If someone spends 100USD and likes the change in sound than let them be. Some people dont hear the difference fine just dont buy the 100USD cable and go make a RM20 one instead.

Some people do hear the differences between expensive and non expensive cables but who are we to judge them since they are the ones hearing it, not everyone has the same hearing capabilities, everybody is different.

Cable makers like pcwork do a lot of tinkering trying out different cable types with different plugs with different headphones. Braiding, designing all of that hard work is done by them, than people go in and say "aiyah these stuff i also can make why so expensive", but the fact is that your just copying what you see inside you didnt take the time to test all the different types of cables and plugs not thinking about the hard work and passion that was put inside those cables.

You can see all the people who adore(not worship) PCWork because of his handywork, they are of really good quality and also looks wise they look really great.

This post has been edited by siles1991: Mar 5 2013, 07:21 PM

i think i messed up my female jack now i decided to just recable my superlux but i fell into this problem...i dont know which wire is which xD

There is 1 red wire and 1 white wire and 1 solder point. i'm not sure which is which to solder too



red and green circle both connected to left driver.

yellow circle had a wire soldered on to it

This post has been edited by siles1991: Mar 10 2013, 11:15 AM

after much hardwork and tenacity this is my end product very extremely happy with this because it's my first time recabling a headphone wheeee!!!

Ignore the horrible braiding at the end because it was blardy hard to solder while braided...and the heatshrink there is from when i was stripping the insulation and metal weave protecting the cables D: but all in all totally worth it

This post has been edited by siles1991: Mar 10 2013, 12:59 PM

can try walking around jalan pasar they might have sleeves, i think ace hardware also has sleeving

interested as well can use for RCA plugs and etc right? if it's 2 cables is there is no need to ground? Canare l4e6s is RM10/meter how much is this? sorry for noob questions xD still new

ah icic, got any cheaper alternatives than the l4e6s in jalan pasar?

ah icic you get your raw cables from online dealer?

any cheaper alternatives to the l4e6s that can be found in jalan pasar?

gotta go to jalan psar already getting a new amp need to get a interconnect for it xD have left over cable just need the plugs now

gonna get some rean plug for l4e6s

Guys is there a way to connect both speakers and headphones to a single DAC using cables? Like 1 male 3.5 to 2 female 3.5 I have quite a bit of l4e6s left



This post has been edited by siles1991: Mar 22 2013, 08:29 PM

At work so cacat draw only. Planning to terminate my y cable with mini female and 2 male(input and output) so connect the male straight into amp and than speaker into female. Theoretically should work right?

This post has been edited by siles1991: Mar 22 2013, 09:48 PM

so i shouldnt just let it be a constant signal to both? I can just turn off my speakers when im not using and control my headphones with the amp

I was initially planning to make something like this http://m.instructables.com/id/Mint-Box-Aud...witch/?ALLSTEPS but people say I can just use a Y split cable, and im not knowledgeable enough in electronics to add-on stuff D: I can only follow guides.

This post has been edited by siles1991: Mar 23 2013, 11:29 AM

So is it possible? Y cable that terminates into 1 female for speaker and 1 male to connect to amp?

going to build 2 interconnects from nys231 and l4e6s today~hopefully my soldering skills have improved

thanks i already have the helping hands haha.

where in jalan pasar can get the l-2b2at? I find l2t2s at IC electronics at RM10/mtr same as l4e6s