erm..juz wanna noe..doesnt matter how far it oc..

hi , anyone set vdmim 1.95v to operate Crucial ballistx ram?
cos M2N-E has limit ram voltage

Why not? My crucial ballistics DDR2-800 can run at 800mhz at 1.8v..... Or you're asking something else?

bro change ur mobo is better~ M2N-E really limit ur OC where you having all good staff~

new ddr2 user here...

just got crucial 10th anni. handpicked d9gmh.... 400 @ 4-4-4-12 need how many vdimm? anyone try before?

How do you guys normally "handpick" RAMs that has head spreaders? Are we able to tell what chips they carry without opening it?

Warranty is until 2.2v. Not recommend to go above 2.2v 24/7 as some say that crucial rams don't like very high voltages.
Better have active cooling too.

At 4-4-4-8, try 2.2v @ around 950mhz or higher.... You can even try 4-4-4-4.....

The supposedly "handpick" rams are done in the factory. These rams comes already packed in plastic, you can't open them to see what rams are inside.....

I'm still rather confused with the "handpick" term You mean these are specially selected RAMs out from the factory and they perform better than the rest?

Hehe, I don't really understand their process of "handpicking" either. I assume that they select good batches of chipset to put into the Crucial 10th anni.....

Yeah, even though they are DDR2-667 rams, they perform much better than equivalent RAMs or even those with DDR2-800 rams.

For example, my 10th anni perform almost as good as my crucial ballistix DDR2-800 rams. For a DDR2-667, that's considered good....

However, I have seen some 10th anni going higher than that but needs more voltages..... again, overclocking not only depend on batches, it also depends on luck and the hardwares, bios and other factors....

This post has been edited by kmarc: Nov 29 2007, 11:35 AM

hanpicked is just a word to attract, most of 10th is handpicked d9gmh.. and easy to achieve 1200 or higher with good hardware..

Probably it's something like speed binning. the choose the 'best' of the bests for annies.

Thanks for the information. I only remember I "handpicked" my OEM AthlonXP NIUHB I didn't know these days they do it from the factories.

These days they overclock some parts at the factories too.. weird

just want to ask nood question here.,does anyone know which D9's chips on crucial ballistix 2gb ddr-800...tq

----> D9GMH <---

Anyone here using kingston value ram 667? Just wanna ask, why my ram doesnt read as 333 MHz speed in cpu-z, instead it reads 299.4Mhz. Why????(i loaded optimized default in bios for my default setting)

It is because of the ram divider.
Read the table in our AM2 thread

-pWs-

This post has been edited by -pWs-: Dec 3 2007, 12:13 AM

between 10th anny-ballistix-ballistix tracer..which is the best> all of them using D9GMH rite?wht i know is that the difference between blstx and tracer is wo/led and w/led rite?

I have the 10th anni and the crucial ballistix. From these 2 rams, the ballistix was slightly better in overclocking but not by much. However, remember than the 10th anni is DDR2-667 and the ballistix (that I have) is DDR2-800. This is based on my ram modules only though.....

The tracer is bling bling rams and runs much hotter than the anni and ballistix due to the LED setup. So, I guess in terms of OC, you need more active cooling for it.....

All of them are supposed to be D9GMH although some forumer previously posted (I think it was posted by an 11-year-old pretending-to-retire female overclocker ) about some crucial rams not entirely being D9GMH....... I think crucial never claimed that they have D9GMH in all their rams either.....

For me perfer 10th ann, the bling bling is not important as perfomance compare each other is about the same

This post has been edited by tachlio: Dec 3 2007, 04:59 PM