If looking for the HDMI port, you may consider Toshiba Encore 8', spec same with Dell Venue 8 pro, but with HDMI out..................price at USD329

drop to USD229.9..............
http://www.amazon.com/gp/product/B00FEE7B1...&tag=joyo01y-20

not bad, RM905 still worth the price...............

I have USD50 at Amazon, any method to use up this money to buy?

its Amazon gift card.............consider coupon?

Congratz, how the smoothness?

last night selling USD99, limited quantity..........

Yup, thats why it under USD

This post has been edited by StupidGuyPlayComp: Dec 10 2013, 09:41 AM

Limited to 100pcs, super difficult to get it..........

Can comment the difference among w4 and Dell venue 8 pro!

yup, Dell Venue 8 pro is lighter...........but only single channel RAM, no hdmi

mind to run crystal mark and share the result?

Go to uefi and activate hs200, the result above is not satisfy

The latest UEFI A04 version has remove hs200 option, what your uefi version now!

BIOS v A01 and A03 with HS200 support, A04 disable this setting

To Increase eMMC speed to HS200 (including the microSD fix in this as optional)
1) Swipe in from the right for the charms bar
2) Select Settings
3) Change PC Settings
4) Select Update & Recovery
5) Select Recovery (3rd option on the far left)
6) Under Advanced Startup press the button that says restart now
7) Wait for tablet to reboot
8) At blue screen Select 2nd Option, Troubleshoot
9) Select advanced options
10) Select UEFI Firmware Settings
11) Select restart (shows "restart to change UEFI firmware settings)
12) You're in a weird BIOS mode now, begin by pressing the Esc button at the top right
13) Choose Advanced (2nd option)
14) Choose LPSS & SCC Configuration
15) Change SCC emmC 4.5 HS200 Support to 'Enabled'
16) Change SCC eMMC 4.5 DDR50 Support to 'Disabled'
**NOTE** if you want to increase your micro SD speeds at this point
**16.1) Change DDR50 Support for SDCard to 'Enabled'
**16.2) Change SDR25 Support for SDCard to 'Disabled'
************************************************** *************************
17) Hit Esc at the top right corner twice (you should be at the main menu)
18) Select Save & Exit (Last Option)
19) Select Save Changes & Exit (First Option)
20) It asks you to confirm you want to save and exit, select yes and the tablet will reboot

then just wait for new bios update...............

Dv8p and w4 screen quality got what difference? May share?

if both at 100% brigjtness, auto brightness off, which one dimmer?

yup, I felt that w4 is too warm...................cause the color very saturate (is over actually)