http://www.metku.net/index.html?path=mods/...inder/index_eng

i have a defective maxtor dmp9 drive with me and ive done many things people normally woudnt do with HDDs: dropping onto the table, hitting it with my knuckles, knocking it on things i see and so on. nothing serious really, i just cant find a star-shaped screw driver to open it

Seems som ppl so free they got nothing better 2 do. Why not put some mercun or jus bom it. C wht happens. Or test w/ some aqua regia

Anyway Silon, the srewdriver could easily be found @ hardware shops. Although mostly sold in a set, u may still find single ones

ive been to hardware shops before and they dont have it

STOP SPAMMING!
Thread cleaned.


This post has been edited by ianho: Jun 4 2006, 10:52 PM

just wonder. if we plug in the power. will the disc really run? kinda sceptic. cause the hard disk is kinda partially vacuum. but since its under atmospheric pressure. will there be any problem running it?

it will, just that the vacuum is so dust will not tamper with the platter inside

Actuall can we sell it to sumthing like old news paper type?

Aiyak...I had that particular size in my set but sold 2 Dreamworks ready. If u r intested, mebe I'd get for u

Sell as scrap metal lor

walao 1 object use twice....

This post has been edited by HaM7: Jun 5 2006, 10:22 AM

hmmm how much does a screw driver like this cost? i had my mom run to multiple hardware stores and even the hardware section in JJ. dont wanna spend too much effort on this thing

thanks alot

nice nickname. the mods didnt say anything about it? LOL




once i saw a guide [cant remember mag or net] where they cut the top off and used arcylic to make a window and put an LED inside. all for the purpose of decorating the casing

I have 2 x 80GB Maxtor DM+9 lying around after it got friend by ants, and a WD200, which I have opened it by force, use a huge screwdriver to pry it open, the 2 DM+9's are still pending destruction...lol-ness

I use faulty hdd as hammer at office....
if can buy dermel disk... can mod the hdd to be as a dermel cutter ....

This post has been edited by omarba: Jun 5 2006, 05:37 PM

lol/....wah so many interesting uses of a hdd...

hmm.....so the HDD always spin at its full speed once the power is being supplied to it ??

im assuming yes? this question is interesting. perhaps you can write in to HDD makers and suggest them to use a cool and quiet technology for HDDs

u know.....if this thing can work with water (in wet conditions, wet sanding), and the sand paper can be changed easily...it just might be useful for lapping jobs man...

other than that.... kinda hard to think of any use for pc-related work

Sold @ RM 5 only

A'? Wht's dermel disk & wht u mean by mod the hd to be cutterż

lol.. things like this oso exists arr??

Ace (MidValley) might have it. Ask for a "hex wrench".

i though it is called Torx Screwdriver

yup....i agree with miss Little .........i think its Torx screwdriver

ooooooooo [suprised/interested/curious/excited] ill go decide, if i want, will you help me buy and send to me ar?? [or course, u can add for ur petrol/etc/etc]

oh, icic. next time if i were to go to KL and EVER EVER EVER go into midvalley, ill go have a look. thanks!

Just use it as a weight to stop your papers from flying everywhere.. what is it called ar..

It's called Torx screwdriver , Torx driver or simply Torx

Hex wrench is diff

Hakhak...np dude

The HDD body is aluminium or cast iron? If aluminium, can sell to besi buruk? Cast iron they buy cheap2 onli.

cast iron can get rusty,maybe its aluminium