Well, can someone teach me the correct ways to apply TIM on a graphic card? Is it just like how we apply it on processor? And the amount of TIM is...

That depends on what type of graphic card are you using.
If your graphic card GPU is naked core, then just put the TIM in the size of a rice grain on top of the naked core.

If it's a core that has IHS on top [so far i only see Nvidia 8800 use IHS to cover the core] u have to spread to the whole IHS.
There's a reason why this time it's different from the processor, i can't explain it myself, but this is how it should be done.

i read somewhere Ultra120 extreme cannot fit mid tower casing eh? kena tebuk and buat lubang for it to jut out ke??
how much is it?

RM265 in bulk order.

if u have side panel fans then xfit due to the height.u need to remove the side panel fans.price?shawty have Quoted edi...priceyyyyy....

oh, the shop tell me to spread it all over the cpu surface...

And you think the shop technician are better than us in everything?

my xp90 can't cope up wit my c2d, looks like i need to get a replacement

any suggestions guys??

What your current temp? .. Idle and load?
What C2 you're using at the moment?
Do you OC? how high?

Apa plak tak bolehnya, ko pakai e6300 je, oc pun bukan tinggi sangat.

Ko bersihkan XP90 ko, pastu apply new layer of MX-2, jadik la.
Bubuh TIM dgn cara betul.

XP90 is more than enough for your e6300.

Bersihkan XP90 sebersih bersihnya, kalau boleh, buat sampai berkilat, lepas tu confirm dia berfungsi macam masa ko mula mula beli.

* OT: Bang, bila boleh bagi aku test V1 ko?

hmm, using thermalright TIM that i got from hwoarang. just worried that it's not getting good contact wit it

shawty: tunggu next wk bole tak? aku outstation hari ni dengan esok so insyallah aku cabut v1 aku tu isnin, pastu bole jumpa

Err bro, that's a really weak thermal paste i remind you.
It's performance is even lower than the AS5.

Clean up your heatsink, clean your fan blades, apply some MX-2 & you're good to go.
XP90 is more than enough for your e6300.

hmm weak ker?? kalau camtu ko ada surplus mx-2?? bole aku test yg tu lak

Takde la bro, stock dah abis, tanya moderno.

BTW, kalau boleh beli arini, sebab harga dah start naik untuk semua Arctic Cooling punya products.

This post has been edited by sHawTY: Aug 11 2007, 10:58 AM

aih susah la camtu coz aku outstation

nampaknya terpaksa la guna balik tR punya TIM tu dulu

using 1.375v. idle temps of 38, load 68. What heatsink would be better than the stock? I'm thinking artic freezer, XIGMATEK HDT-S963 or scythe ninja rev b. Out of these 3 which would you recommend?

the XIgmatek also good since got a good reviews everywhere.The HDT seems to work wonders.im awaiting the big bro to arrive at my door step soon

btw what proc ur using the load temp freaking high dey....DANGER!!!!

think i'm probably going to go for AC. cheapest. cant afford to spend much more ~_~

I would recommend Artic Cooling Freezer 64Pro ...

cheap and performs not bad .....

interested with one just look for me ..

the XIGMATEK also a good buy just add a couple more bux can get a cooler can withstand OC temp