Hi,
Just to inform you guys that I have tried changing 3 times at SC my driver side front right hand window mold (the long beige color cover thingy), it warp a bit at the middle and can't hide inside the front window right black border. Sigh, have to just live with it. It's unsightly aesthetically for this type of car. If it's a cherry car I can understand, but this is a bit unacceptable for Malaysian made parts, I think it's a local content. Anyways....

Vios new using cc5? Wow good tyre choice
That number is not important
How many KM u can go with 1 full tank? This is more precise
Somebody here said rm400 if from halfcut lancer
Ultra racing rm500++
That 1 is to secure the hood if the hood is made from carbon fibre, when its too light, it can tercabut during high speed, so needs to secure lorr

How to add headlight leveling switch (Early batch, Chassis number below 14,000 confirm have this)
[attachmentid=3620230]
Remove the two screws, Philip head.
[attachmentid=3620231]
Then pull from top, the highlighted red color contain clips. pull outwards towards yourself. (slightly upwards)

[attachmentid=3620232]
The highlighted red color contain clips as well, pull towards yourselft . (slightly upwards)
[attachmentid=3620233]
The highlighted socket is the ONLY socket in inspira (ignore the other two , my own DIY sockets). This is the socket you want to connect to.

[attachmentid=3620234]
The placement is to the right. use a flat tip @ test pen remove the original cover, then plug the new switch in from behind. Next clip the socket in (dont worry it will only fit in one direction, so u wont fit wrongly). 

Put back everything and screw back.

** You dont need to remove the whole thing.

Hmm... what is your rear problem actually?

Do you have that sound from the beginning?  or only happen after some time/mileage?

So far I don't have that problem yet. Probably still new 
But front passenger dashboard side give annoying rattling sound when going through rough road. I checked glovebox, it is not loose... not sure where it came from 

i wanna upgrade my rotors to a bigger size. so when someone tells me they have rotors at x size, i would know if its bigger than stock.

btw no one was forcing you to reply, your replies are very hostile, like talking down to a child