So did the pine cone perform 4yu as well as it did 4MacGyver? Or did yu bust that as a myth?
Depends on your expectation. The pines does not explode by itself no matter what. However, those seeds will only open up when it's cooked, hence popped quite loud. Obviously, it's loud enough to alert my dad, and both mini MacGyvers(me and my bro) was dragged back to hotel and spent the rest of the day kena lectured.
thanks for long explanation. So any way to fix this problem at this moment....? or just treat it as normal.... haiz....
Until you start to service bawah pokok, you can get the magician to open up the rear brake hub and blow the dust every 2 service, better if every service also do that house keeping. So to be sure dust doesn't get stuck on your brake cylinder.
Eh i new to car thingi .. I got Saga FLX 1.3 CVT recently like 2 week ago.. Petrol problem or issit normal???Sorry cuz me new.. 1st time drive 40 km drop 1 bar so total 240km it can go .so i tot was normal..
after no petrol = pump petrol at shell I notice 30 km drop 1 bar O.O
Can squeeze in another 1 or 2 litre if you use really low speed towards the bottleneck. Usually when you fuel until the brim, your 1st bar can last between 50km~70km depends on your foot. Full tank can run around 300~320km in town driving, depends on traffic condition.
For CVT, always remember let loose your brake, let the car start to creep forward a bit, then only gently apply gas pedal. It's not a traditional dinosaur automatic car. Put your foot down during traffic light your car also wouldn't sprint and feel powerless, because the clutch have not bite. It is exactly a manual car, but CVT only got 1 gear and you don't press the clutch pedal but that's all
Hope this help you save a bit on your petrol consumption
I drive a FLX SE and a Myvi 1.5SE, both yield the same FC figures when driven the same way (12km/l-13km/l), so I can tell you FLX has better FC than BLM.
But anyway, your money your choice
QUOTE(Quazacolt @ Sep 2 2013, 10:26 PM)
you've seen his threads, right? personally i wouldn't bother w
Prolly not even a GaGa owner. Plain basher/P2 salesman
QUOTE(Quazacolt @ Sep 2 2013, 10:16 PM)
has a manual variant too...
damn this is tough compared to the inspira lol... the inspira CAN go above 200km/h easy and it's a c segment... however with the rising fuel price and the 1.2l attrage being so good at FC...
Petrol just price hike, saw peepur Q up until blocked the whole Manjalara, wanna go home also got plobrem I was like "tsk tsk tsk, look at these idiot". Manatau reached home Mr.YAB already dressed up, got the kids prepared rush me out go fuel up
For now, 20.0km/lit more important, coz price hike 20cents. Your 200kmh, wait until later petrol price drop or you're more affordable to a 20mil turnover business, then only decide. By that time you probably not in your 20s anymore, and you'd be driving a Porsche doing 20kmh around clubbing area in the hope that some chicks at their 20s pay some respect to you.
Don't forget, 貪慕虛榮肯定係必然,揸得寶馬就打得起油;落得PUB場就FING得起錢,車門都比D妞蔓鷎爛. So, for now settle with any crap, next time you'll have your turn to hit the big time
This post has been edited by davidke20: Sep 2 2013, 11:07 PM
and that line, i REALLY CAN'T picture myself driving a Porsche going clubbing weih lol no matter how hard i try i just can't lol. it's not about being humble or anything, even if i do get rich, i just don't see myself buying that car, nor am i a clubbing person to begin with lol. but yeah, definitely will keep that line in mind
Don't think you get the idea behind, it's not about what car you buy. It's about what age you can afford, and the age usually already defeats the purpose regardless how good looking the car is. Trust me, I was the 1 who bought a BMW with cash when I was 21 The problem is, I don't have money to service the car, and had to sell it off with a huge price slashed because the aircond compressor replacement would cost me RM7k for a recon unit(again which I can't afford)
can I know where to get Ular Oren Grounding Cable and what's the benefit installing it ?
Ular Oren is a DIY product, you can go hardwareshop and buy 300amp welding cable and screw it on your engine to battery negative pole. The effect of having sohigh amphere grounding is to supply a bigger channel of return path for electricity, hence it improve throttle response, indirectly fuel efficiency depending on driver's attitude. More detail, refer blow:
» Click to show Spoiler - click again to hide... «
QUOTE(davidke20 @ Feb 6 2013, 11:27 PM)
Cainis Niu Yier Bulk Effort Improve Campor IAFM throttle lag
Ground cable made of 300amps copper core welding cable
More detail and video in spoiler
» Click to show Spoiler - click again to hide... «
Some vehicle have this effect:
Helps reduced light dim when AC kicks in Some said they have a problem when AC kicks in, light will dim I didn't notice that problem, but it seems fine to me
More importantly I find it useful on this improvement Standard machine, throttle lag by seconds
I find some obvious reduction, especially AC kicks in has greatly reduces power loss
T&C RM20/unit for local self collect ONLY Sorry currently not available for shipping Complete product but installation not included Minimum order 10 units Order close date 10th February, 2013 Payment in advance to avoid FFK disappointment Please bank in latest by 14th February, 2013 Collection date after 18th February, 2013
Banking detail
» Click to show Spoiler - click again to hide... «
Name: LAI ****** HO ACC no: 164119060685 Bank: MBB email: palebastard [at] gmail [dot] com Kindly email me your bank in date, amount. If possible attach bank in slip. Please include your LYN user name so I know who you are. State clearly you're ordering the ground cable. TQ
Bulk list as below:
kenjilew
mahihi
SiuYi
SiuYi
C2KBAS2005
C2KBAS2005
r3apers
nazri - club BLM
vampirewong
vampirewong
Please fill up the list if you're interested, understand and accept my disclaimer. Kindly add [ * ] without spacing infront of your name. If you have not read disclaimer, I strongly suggest you do so. I don't wannna do charity show ended up with lawsuit
Disclaimer: These sohighness effects could all be placebo as I have no proof nor data to support it. I've discovered this all because of a stupid accident, and I like the feeling. I thought I wanna share this affordable add on for the rest of budget modder and placebo worshiper. If you find no improvement in your car after install this thing please don't blame me. Placebo are subjective, my butt is different than your butt, so you have all the rights to complain you don't feel shit that I felt. Anyway, grounding cable will not do harm to your car unless you short circuit it with POSITIVE energy(even without ground cable your car still catch fire when that happened). So, having the cable in your engine bay will only make things better and no harm done after all(again, unless you short circuit it). Do remember I'm not responsible for any damages caused(if any lar, ground cable yo), use at your own risk.
Why suddenly got so many inquiry meh? If yes ma open bulk lo. But I need to check price first. The last time I check price hike kao kao ady, not sure whether they've slashed back the price.
i'd like to think of myself still ok at living the fast lane EVEN IF i am old (i'm not ok, at least not yet, ok? ) you know, that "cool uncle" that some families have. i can be like that!
you're cool too, btw. so no worries ok?
» Click to show Spoiler - click again to hide... «
ok?
I know you're the cool unker type in the future, so don't worry Me not cool lar, drive 80kmh I also will pee my pants Me at funker age, behave like funker but that's all
On the side note, still thinking of pay zeone a visit with those few of us who is kaki enough
My relative keep making noise to me after i show him that cable, he owns BLM == Actually i wanted to find the material and do it myself but i got no idea where to find all those materials
I go check price 1st, if OK then will come back open bulk
remember our thing ya... i told him to meet up after I finish exam.
Might turned up crazy, heard Mahihi robbed TNB... so.... You may consider my proposal the other day Anyway, the deal is still on. Things happened too damn quickly, I robbed Mahihi 800 from his pocket, and due to the rob he accidentally RM200 richer, now both sohigh kelang kabut ady Tibai I oso dunno I write what now Cigaojorxin. Sugar high
QUOTE(dares @ Sep 2 2013, 11:57 PM)
Bila mau la....what happen to Johor trip Alor Setar
Johor trip cancel. Budget to mod kar all gone repair Shawie "flywheel" liao Ayam serius
Someone PM me to alert my yesterday post was in Cainis, and they having trouble even they tried to translate it, and I found it interesting
貪慕虛榮肯定係必然,揸得寶馬就打得起油;落得PUB場就FING得起錢,車門都比D妞蔓鷎爛
Google translate as:
Department of vanity certainly inevitable, Zha afford to get the BMW hit oil; come PUB games on FING can afford it, the door girl vine Gao rotten than D
today at highway suddenly a small stone flew to my front windshield and chipped a little of it
#hearbroken ...
how much to fix the tiny chipped dot ?
RM80 to repair. Life time warranty. Can try to nego, may be can get cheaper. Call your insurance company, ask whether your windscreen covered. If yes, ask whether you can do partial claim for REPAIR not replace.
Try to keep original windscreen as long as possible. It's 1 of the major safety feature of a CAR.
Still can't find a replacement as safe as the factory bond?
In the United States, the Auto Glass Replacement Safety Standard(AGRSS) issued by the American National Standard Institute (ANSI 002-2002) is the first and only American standard detailing the steps and procedures installers have to take to provide safer automotive glass replacement. It is one of the most significant safety developments in the auto glass industry for the last 50 years. Installers are trained and certified by the National Glass Association(NGA) which comprises of over 4,000 member companies.
In our cuntry, what do we have?
The last time a few member argue with me, saying the current professional already started to use WHITE/GREY glue instead of 225 akon glue. Some even claim they use pure silicone
And how to install?
"After a windshield has been replaced, there is no reliable test to determine if the replacement was done properly or safely" - Leo Cyr, VicePresident of National Glass Association. Auto Glass Division, USA
Compare to factory bond
I didn't say DO NOT CHANGE even if the windscreen cracked kao kao. I was saying, try to keep the factory bond for as long as possible. If and of you feels your workshop is more trust worthy than an insurance guy seeing funny ways how people died in road accidents, please go ahead and change it.
QUOTE(jaylim94 @ Sep 4 2013, 01:19 AM)
I want to confirm one thing here,
I used Eric VS. recently when air con kik in my car headlamp will dim obviously. Is it something wrong with the VS?
QUOTE(jasonloh7906 @ Sep 4 2013, 01:33 AM)
wondering too. got the same thing happen.
Same here Lately my reading dropped until like 12.xV when ranjiao airkon kick in. Did a short study to find out, ECU adapted to the ABNORMAL(which now we've normalized it with voltage stabilizer) power supply, throttle response IMPROVED, as the throttlebody flap close too fast. When that happened, engine will choke and causes a short surged in RPM before before fuel injection complete it cycle. RPM surge, what happened to alternator? Supply surge also Tibai.
Duda, that new dewgong look damn neat leh(ayam toking about the natural gas injection module and the spare tyre tank), can't even compare with what I saw everywhere in KL
Please understand for normal steel locally use to fabricate exhaust manifolds, there are 3 types in the market.
1) Black - known as hot rolled steel, with rough surface. Steel was heat treated, can stand high tensile strength(stretch). Easily bendable. Very suitable to mill fabrication to make water pipes, and can stand high pressure
2) White - known as cold rolled steel. Steel was not treated. Having smooth surface and easy form/deform characteristic. Very suitable to use for decoration/surface enhancement. Weak tensile strength(stretch), easily breakable and usually people does not use too thick since it's
3) Galvanized steel - hot/col rolled steel that being sent to dip/electrode galvanize, in order to form a zink coating on the steel to prevent it from rust.
Therefore, having white steel in the engine bay, it will get rusty regardless. If encounter cracks, its highly possibly caused by the welding seems. Do remember, any round pipes you saw in the market, it was originally a long steel stripe, being fold togather and use high frequency welder to joing both SIDEs. By right an exhaust pipe should atleast to have Galvanize pipe(another better choice is get SUS304 stainless steel.