i get from china

This post has been edited by LEH1988: Apr 15 2014, 02:30 AM

How much that bull cost you?

You asking the wrong person

http://www.diecast-empire.com/webshaper/st...roductItem=1115
RM2799.

He's asking Jac specifically and I believe Jac had it repainted so there's extra cost on top of DE's price. I'd leave him to answer it.

Omg........that cost a phone already........

He told that its not worth the price from what he experienced.

sp6068: After u read the below list down problem, u judge urself worth or not worth...hahaha...

1. All interior part made by plastic and rubber. Many part need cement glue to stick together. Some more the part after joint still got huge gap.

2. Both seat made by rubber, cant fit nicely with the plastic seat flame. The side rubber is swelling, unless use super glue to glue it. Normal cement glue cant work on it.,

3. Plastic dashboard, black color plastic but not fully black, can see many white color liner cross over the part. Need repaint.

4. Main body made by diecast but side skirt and airvent made by plastic, the color not match between the plastic part and diecast.

5. Lot of step inside the installation manual was wrong or not indicated.

6. Part missing.

7. All 4 wheel height is too high. Big gap between the wheel and car body.

8. Drive shaft coming out from engine is not connected to the wheel, but when finish assembly, when u turn the wheel, the drive shaft will hit the wheel to turn. U can hear some sound like "tak tak tak" when u turn the wheel.

9. Side skirt srcew hole is not match with body screw hole. Cant screw it together and tis had cause a big gap between the side skirt and body. More obvious at the back part.

10. Front bonnet and engine cover cant open evenly unless u use both hand holding both side and open slowly n carefully. Otherwise the cover will stuck n bend.

11. Each wheel just use 1 center screw to lock it. If u screw it too tight, the wheel cannot spin, if too loose, the whole wheel will shake.

This post has been edited by blu3hamm3r: Jan 13 2014, 01:37 PM

All that for 2k+? Damn Rather get AA or Tamiya 1:12 man like that. I guess the pocher was meant just for its huge presentation of the Aventador since its the only alternate big scale bull compared to Amalgam's.

Any one here own a Honda NSX Type R? Which color u prefer? Red , white or yellow?

Jac, I'd suggest you go for the white. White with red interior, looks pretty goood on the NSX imo.

for me, type r should be white la. Lol. More iconic.

Yes, white is THE Type-R colour.

The only good you can get from this model is bragging rights. I mean, who else makes 1:8 Aventador?

Can still get at retail price meh? Old release already.

1/43 version. 1/18 sold out already...




Attached thumbnail(s)

Avocado, where u bought the 1:43 ae86 n wat brand is that?



Blu, I bought the 1:18 white nsx, it's the original type r color

I will choose white but the blue fairlady behind is

I guess you didn't know AA re-release it?

http://www.diecast-empire.com/webshaper/st...ProductItem=947

HOLY SMOKES! For a 1:43, that's really detailed!

What brand?!

jay8393: I know. Tat's y i ask majority wan choose which color. Seem like all prefer white. Tat's y white is all around but yellow seem like going to be rare in this model.