Might as well have a discussion here in case some of you guys miss out on this, especially when they only appear to have 600 made from the Indiegogo campaign.

Owner list:

V1 Black:
yimingwuzere
hazziq

V1 Silver:
bocy
totox7

V2 Black:
nmark
bocy

V2 Silver:
Yushin
ruffstuff

yzkoo
DoomGuard

nekomika04
E-J@1
abrak

This post has been edited by yimingwuzere: Jul 23 2015, 09:30 PM

Bought the black one. Going to fit my current Bitfenix Prodigy system in it.

Haven't got a reply from wahaha360 on hardforum yet.

Sigh... mine still MIA. Called up Pos Malaysia, still at "Departure from outward OE" from 6 November till now, they've got no idea where it is and think it's still in transit to Malaysia.

edit: anyone other than Lucassss received their case yet?

This post has been edited by yimingwuzere: Dec 23 2013, 02:19 PM

Only on eBay, this is a limited run, with no guarantees that the case designers will get another batch made.

Finally here. Now I need to figure out how to squeeze my existing Bitfenix Prodigy rig into this.

Just an update for all those who would want to get one of these cases, the case designers are selling their extra stock:



source: http://hardforum.com/showpost.php?p=104064...postcount=10605

No tax for mine.

If I recall correctly, computer parts aren't taxable?

So buy it

I updated the OP with the list of users, let me know if I missed out anyone!

Also... http://hardforum.com/showthread.php?t=1831382



much sexy, such style, so want, wow

Oh wait, hikari is selling the SX600? Don't see it mentioned on the WTS page...

Do you have a pic of the cable set that comes with the PSU? I might pick one up if the slim cable set suits the routing path in the case better than going with sleeved cables.

This post has been edited by yimingwuzere: Sep 4 2014, 11:05 PM

Found it. Specs are slightly different though.

SX600:
1 x 24 / 20-Pin motherboard connector (300mm)
1 x 8 / 4-Pin EPS / ATX 12V connector (400mm)
2 x 8 / 6-Pin PCIE connector (400mm / 150mm)
4 x SATA connector (300mm / 200mm / 100mm / 100mm)
2 x 4-Pin Peripheral connector (300mm / 200mm)
1 x 4-Pin Floppy connector (300mm / 200mm / 200mm)

PP05-E:
1 x 20+4pin ATX connector (350mm)
1 x EPS/ATX12V 8pin(4+4) connector (350mm)
2 x PCI-E 8pin(6+2) connector (350mm)
2x PCI-E 8pin(6+2)+PCIE 6Pin Connector (350+50mm)
1 x two (2) SATA 90˚connectors (350+50mm)
1 x two (2) SATA 180˚connectors (300+150mm)
1 x two (2) 4pin +1 x Slimline SATA connectors (300+100+100mm)
1 x two (2) 4pin + floppy connectors (350+100+100mm)
1 x three (3) SATA 180˚ +1 x Slimline SATA connectors (300+150+150+150mm)

remember to post pics when done

my set's still not ready yet

No final assembled pics? You can't be busy as I am...

Some guy managed to squeeze two 240mm rads into the case.



http://hardforum.com/showthread.php?t=1838367

Originally on an indiegogo campaign.

Now only appears occasionally on http://ncases.com/ (currently listed as OOS). Keep track of the official topic at Hardforum's SFF community if they make a new batch. http://hardforum.com/forumdisplay.php?f=102

Price ain't cheap btw... US$200 not including shipping from Taiwan

Cable management isn't the best in the case, but you can do a lot more with black cable ties around the bottom or the top of the case, there are a lot of holes to tie your cables to.

The Silverstone SX600G PSU cables also should help quite a bit as they are pretty slim.

Which GPU? I once had a reference 290X in the case, and it fit just fine. Was really messy with WC tubing though, so it got replaced with a GTX 970 in the end.

http://imgur.com/a/r8MGb

Not quite the final build, as I've added dust filters to the radiator fans, and tucked away the radiator fan cables + the front panel cables away into corners to make them less visible.

Using a 450W 2.0 here. It still have some rare coil noise though.

The fan isn't great, but the numerous reports on the fan noise I've heard aren't really present in my machine (unless I use a 290X on load, and even then the 290X fan still stays louder than it).

Some of the silent PC guys on HardOCP did remove the SFX PSU fan and replaced it though, try checking the HardOCP thread for more info on that.

This post has been edited by yimingwuzere: Aug 7 2015, 09:13 PM

Are you referring to this one? http://hardforum.com/showpost.php?p=103986...&postcount=2686

This post has been edited by yimingwuzere: Aug 10 2015, 05:53 PM