During the Raya holiday, Swisspac Penang has held a overclocking gathering (2nd event! yeah ) at the Butterworth outlet.
The usual suspects are our local scene overclockers, owikh84, SS Lai, kelvin_chen, Ace combat, ktek


show of the day:
Asrock Z87 OC Formula, Asus Maximus VI Impact, GTX780 DirectCU II OC
Owi's collection of high speed DDR3 RAM


Asus Maximus VI Extreme on Kelvin's custom test bench


some showcase of hardware and discussion


This post has been edited by swisspac: Aug 13 2013, 06:05 PM

On preparation
owi brought his 47K applied with Coollaboratory Liquid PRO thermal paste


mounting back plate, water block & tubing



filling up reservoir with distilled water & bleed the air bubble



finalizing with other components


This post has been edited by swisspac: Aug 13 2013, 06:04 PM

Yo watch out fingers! Kelvin's pc is ready to go with new Corsair H100i cooler and new Corsair AX860 PSU




happy tweaker and serious face



This post has been edited by swisspac: Aug 13 2013, 03:59 PM

on going activities:
testing out the GTX780 and Asrock OC Formula


Kelvin M6E black out with POST error 70
everyone was tension because swapping 2nd CMOS or flash back did not work.
Kelvin even take his CPU to install on Impact & OC Formula.
after rest it went back working miraclely without fault on CPU or mobo.
Kelvin inspecting PC to make sure everything are working normal


This post has been edited by swisspac: Aug 13 2013, 06:02 PM

As the nite comes, room temperature falls to 20°C
taking some rest about 9PM


other pics, click for larger size


This post has been edited by swisspac: Aug 13 2013, 05:58 PM

Results & conclusion:
47K scale well with cold temperature, Vcore can be further reduced to stable at 5GHz on Maximus Extreme


we had in-depth discussion on WinXP tweaking and copy-waza optimization to shave off miliseconds in SuperPI benchark.

this Team Xtreem 2666 limited edition also get to run SuperPI 32M stable at DDR3466 cas12 and DDR3500 cas12 validated!
can consider as very good result with Maximus Impact ITX mobo plus fan cooling on RAM


there are still room to improve from time management (almost marathon 12hours), equipment preperation (not enough thermal paste) & sponsorship.
Thanks guys for supportive in overclocking and hope to see more new faces joining our gathering

This post has been edited by swisspac: Aug 13 2013, 06:18 PM

Hi everyone, this topic is opened!
owikh84 kelvinchen acecombat ktek