try change to 50hz, last time I used to connect my STB to my extra 23" monitor and 60hz does not work.

what output cable are you using, HDMI or composite? likely your TV can't process the signal, imo. Does your TV have any setting that could be set to auto mode?

Sounds like the set top box doesn't like the TV's HDCP key (usual problem, the HyppTV decoder is very paranoid. Even analog has Macrovision protection). Test on a different TV, and if still occur then call TM for a replacement decoder since can claim as faulty.

well... u shud hv said it works ok with direct connection to tv earlier... becos most people do that!

u connect stb hdmi to avr, then avr hdmi output to tv hdmi arc? this may be the problem.
why do u not connect avr hdmi output to one of the regular hdmi inputs of tv? all used, no more?

i dun understand yr setup... can't follow what u mean by the red part.

r u new with avr's? all devices can be connected via hdmi (depending how many input in yr avr, can be 3, 4, 5, 6...) to avr.
from avr, the output goes to one of the hdmi input of tv. that's all.
this way, the avr is the center. u select which device input at avr when playing, that video output goes to tv, no need to change channel on tv.
audio will come from avr->speakers only, no audio from tv.
there is no need to to use arc or optical cable at all.
if u want audio on tv too, u need to connect differently.

to be clear and not confuse anyone further, pls let us know:
- yr avr - is it new with hdmi connections to STB, Desktop, XiaoMi MiBox?
- yr avr connected how many speakers?
- what do mean by "HDMI Out from my AV Receiver to my TV HDMI with ARC"?
- why do u think it is necessary to connect avr by hdmi to tv and again tv back to avr by arc?

sorry... answers from readers here can only come if yr info is clear n complete...

From the sound of it I think your AVR doesn't support the HyppTV box's HDCP key. Either that or it doesn't support HDCP at all (unlikely unless it's more than 10 years old). Connect your STB to the TV's HDMI port directly and use the TV's ARC to pass the sound to the AVR instead and see if that works.

Like I said before, the HyppTV box is designed to be stupidly overparanoid for whatever reason only Huawei knows. Even if it comes across one HDCP key it doesn't recognize in the chain, it will straight away drop to SD.

Bro how did you switch to EC6106V5? Bought from TM is it?

Guys, my hypptv stb just died. Can i buy 2nd hand set and use? Got any settings to configure?

this is what i am getting

anyone know how to force unifi hypptv to display 1080p? im using it connected to yamaha avr (rxv477) and i notice it will play in 1080p short while and after that revert to 480p connection via hdmi. cable swap this that most of basic troubleshoot all done but image still revert back.

4 new channels have been planned to launch in HyppTV platform in this September.

- TVB Xing He (CH 220) (1) (3)
- Sony One HD (CH 241) (2) (3)
- Sony Gem HD (CH 251) (2) (3)
- AMC Asia (CH 652) (1) (3)

(1) These channels are possible to launch in the following resolutions.
- 480p 4:3
- 576p 16:9
- 720p 16:9
- 1080p 16:9

(2) These channels will be launched in 1080i 16:9.

(3) The number of these channels may be different once they launched on the platform.

The information may not be 100% accurate because it is adapted from HyppTV Wikipedia. But one of the staffs has confirmed that these channels will be launched soon on the platform.

Let's hope for the best! 

Surprise, surprise, new year gift...10 new channels this coming february...8 of them from FOX Group. 2months freeview for all starting 1st Feb.

Won't mind getting a more powerful box if can sideload other apps 

I think this platform upgrade to 4K is also important for their partnership with Netflix

was mentioned in the media >a year ago.

netflix in unifitv must not be too expensive for users to take.

but if too low, it will be hard for unifitv to invest in new STBs to justify.

+RM20 ok,