Hi, this is my second time open build log in Lowyat.net

After some long long saving money into my Piggy Bank with long time staying with
Maggi Mee with Kari Flavour

Roti with Planta
+

Finally my Piggy Bank is allow for me to build a full custom water cool Rig.

Due to limited $$ most of the part was hunt in our lovely garage sales there. some new some used.

WHy WHy this Project will call as "OverBuild LTE" ??
Ok lets cut it short, the Project "OverBuild LTE"

Overbuild
My rig actually will be only cooling 2 major components only which is my CPU 3770k & 7970 GPU. But i have massive of radiator will be in my build, thanks to our forumer hantarkatsini2 willing to let go my dream case with attractive price.

LTE
Long-Term Evolution, due to massive cooling performace aka. too many radiator, is enough to cool down many hardware but currently short of $$ so my plan will be make all the basic ready 1st. Then slowly "Evolution" it.

Hardware List :
Intel® Core™ i7-3770K Processor @ 4.8Ghz
Asrock Z77 Extreme6
Mushkin Redline Ridgeback DDR3 2 x 4GB 2400MHZ 10-12-12-28
Gigabyte Radeon HD 7970 GV-R797OC-3GD
Plextor M5S 128GB x 2 Raid 0
Seagate 1.5TB + 2TB for Media Storage
Seasonic X660 80PLUS® Gold certification 660W Full Modular Cabling Design
Silverstone TJ11
Lamptron FC6 Fan Controller
LG 24X DVD-RW Drive

Water Cooling Part List :
Due to $$ some of the part was from Mainland Hope the quality was fine.
I7 3770K Cool by = XSPC Raystorm
HD 7970 Cool by = HEATKILLER® GPU-X³ 79X0 + HEATKILLER® GPU Backplate 79X0
XSPC D5 Pump ( Still thinking will it support for some many thing)
Barrow Reservoir (220mm x 65mm)
Hardware Labs SR-1 560 Radiator with Noise Blocker PK-3 140MM Fans
XSPC RS240 Radiator with Cooler Master Excalibur 120mm Fans
XSPC RX240 Radiator with San Ace 120MM Fans
Primochill Primoflex Advanced LRT Red 1/2 3/4.
Many many uncounted compression fitting 1/2 , bard fitting 1/2, 45" 90" Angle, but all in black.

Previous old build with Corsair 500R


This post has been edited by taxidoor: Jul 25 2013, 11:00 PM

Since still waiting for some parts I will list out what should I do

1. Custom Cables length to all component there will be all just enough long for clean look.
2. Single Sleeve for all cables.
3. Mounting 560mm & 240mm rad at bottom compartment at TJ11 with drain port.
4. Mounting 240mm Rad at 5.25" area.
5. Hardware installation.
6. Leak Test.
7. System Up.

This post has been edited by taxidoor: Jul 26 2013, 09:22 AM

Reserved for some updates

Tj-11

i like how u save up your piggybank..i did the same thing before

nice hardwares, looking forward to seeing this, always nice to see wc rig in tj11

although i dont mod, and don't know how to. but it's always very nice to see other people doing that awesome work on their rigs. All the best man, looking forward to your progress.

and don't too much maggi la, not good for health haha

maggi kari is not the best anymore..change to mamee chef la...syiokkk wooo..

gudluck on your mod.cheers

After some long wait some of the item i order finally something is arrrive


Tools for sleeving use.


Colour choice of sleeve. Black w Red & UV Yellow. 2.5mm diameter.


18awg, 22awg, heatshrink for all custom length cable.

Still missing something??

Omg so many need to remove them 1 by 1 what a pain


Some random PSU socket.

So everything must doing something while waiting more more parts to arrive.
thanks to Lutro0 Customs for all the sleeving tutorial i learn the way to do heatshrink less sleeving. Double wire sleeve, ...and more
to who need the tut too please click for it Sleeving Guide

After watching all the video , everything look simple & easy, but once started to do it actually need some skill too , but after some trial & error everything went smooth, here the result


So many cacing, there only for 24 pin motherboard, i think take me around total of 12 hours of work
when all become one,

should have more yellow?

Ok this the current updates i have still need lot to do.

Yeap is my dream case.

Haha now quite maggi already

Hope you enjoy.

Will buy some to try

Oh 1 last thing,

Selamat Hari Raya to Muslim, hope you enjoy your holiday, must must drive safe when balik kampung ya.


Thanks to the long 4 days holiday i can do something to my rig too. Enjoy Holidays guys.

thanks bro! caya sama lu!

So 30meters was enough for you la? Yeah making 24pin custom cable is a really long process. Took me 1 whole day to make it, plus another 1 more day to do cable sewing for it haha.

Also soldering the double wire is a pain if you do not have someone to help you with it

not sure was enough or not
still have 8pin mobo
vga 6 + 8 pin
2 way hdd
pump
fan controller
lightning wire
finger pain


ya double wire i do it my self is ok. haha single wire 3 time sleeved zzz



This post has been edited by taxidoor: Aug 6 2013, 08:51 PM

Wahhh...you got lightning in your rig, bro? Ini rig Zeus nih...

Some update.

Things that make your wallet few hole.


Some rad collection & empty case


still lot to do cable management, hardware installation. Lots..

Nice... How much for all those fittings?

Oh thanks to

BitFenix Malaysia Distribution[URL=https://www.facebook.com/messages/BitfenixMalaysia]BitFenix Malaysia Distribution[/URtL]

I'm the lucky person to get the Lucky gift. So will replace my current Lamptron FC6 to Bitfenix Recon fan controller.

where did u buy this thing? This post has been edited by tukang_kebun: Aug 27 2013, 06:02 PM

congrats on winning, wished I won though