means must take off the cover?

Hye guys.just got my 2nd Hand neo cps a/t last Monday. Im the 2nd owner Year 2009, mileage Around 52k. the car Is fine until yesteday when the tak tak sound (single tak only) happened. (the sound come from the front part.)
1st scenario - It happened when i change from n to d. 2nd -when driving, i let go the pedal (lepas minyak) and then tekan Minyak. It Sounded when i tekan minyak.
3rd - when i brake. Short - Medium hard braking..this one, i did it just now. Just to test if there is other way i can produce the sound. Unluckily it happened too

I also try open up the bonet to find where the sound come from. Ask my friend to Change from n-d (handbrake pulled). The engine will move a bit (mcm nk rotate) because of the torque. The sound happen when this engine is moving.

What puzzle me is why the sound also come out when i brake.is it Two different problem?.the Sound is quite similar.single 'tak' sound only.

Anyone encounter this problem? Just to gather some knowledge/info b4 sent it to repair. and of cos to avoid kena tipu..huhu..thanks

i wonder if its visible when pop up hood or look from below? can find the front and rear but not the third mounting.

got front mounting meh?
afaik there are 3 mountings which are on left, right and rear.
the one u are looking is the one under the battery? gearbox mounting? is it?

Thanks for the Info. I think that might be it. i dont think Its the drive shaft cause no continous sound when i make u turn. I think the Sound come from rear mounting (between Engine and firewall) is this problem need to be repaired asap? Or just minor thing?

this one?

http://protonperoduaparts.com.my/412-thick...ng-rear-rod.jpg

i might be slowpoke, but just saw these just now

Mobil1 Fully Syn 5W-50 for RM142.90
Shell Helix HX7 10W-40 for RM89
Castrol Magnatec 10W-40 RM89

Want  to ask all sifu advice.. my neo feel so bumpy when driving ard 110-150. Suspension problem or what? Need advice =)

I notice that my neo is quite bumpy. Travelling back and forth form JB to KL. The highway got no bumps but not so rata the jalan. When I speed 130kmh>, the car really henjut2.

anyone having the same situation like me? I'm using the new neo. What to do ? Tak syok la drive like this.

I used north south highway towards johor can feel it. While I drive on grand saga highway its smooth.

How's the WorkShop Manual?

Got it already? 

Nais..can do DIY..

Got. Which spark plug is suitable for neo cps?

And what is the difference? How to understand?
Example: Denso Iridium IT20 and IK20 and etc.

Hehehe.

Got what different between gasket base and tapered base ahh?

What should i expect in term power and torque increment  after using piggyback compare to stock cps? lets say that i done minor pnp upgrade such us exhaust/open pod filter/ adj cam/ lcp..
Any idea?
I plan to buy the mangement 1st bcoz later much easier if wanna bot..

dayummmm     
btw my bleeder nut leaking issue solved at proton sc  f.o.c
cause : gt thick coolant+dust residue on between the nut casket and the nut hole lips area   , and it with sandpaper and now no more leaking
thx for ur tips  

Looks like bonet bra but the material say no..what is that? And how munchie?

you adjust yourself?
where you get the reading?
i need one of those, plus cover for bumper also. now so many paint chipped on my bonnet and bumper.

I never understand the purpose of using this cover..
It only cover small area only..paint chip normally occured at bumper...if you see my car...only few scratch on the hood due to stone chip but bumper area...fuh...like having a pimple..

Ya bro, because i replaced my works engineering brand RM280 to original Sard RM390, both set to 3.5 the sard felt much better, no whistle sound, good pickup and smooth, no more jerk.
I want to know if the graph the tuner decrease or increase the psi to make the 12 A/F Ratio(blue) to 13 A/F Ratio(red), hard to explain, just want to know 

Blue and red, A/F graph below.

[attachmentid=3728381]

Wrong, http://www.turbobygarrett.com/turbobygarre...ng_rich_vs_lean

How abt R3 exhaust and R3 ecu?

can rev to 8k rpm summore...