Project a-NOOB-is-HERE
Hye LYN forumers, this is my first worklog here. So please give some advice.
I will be watercooling my SILVERSTONE TEMJIN TJ-07 INVERTED.
Here is my pc details

PARTS:
MOTHERBOARD: ASUS MAXIMUS V EXTREME
CPU: INTEL I5 3570K
VGA: EVGA GEFORCE GTX 670 FTW+ 4GB TRI-WAY SLI
RAM: G.SKILL SNIPER 4GB + 4GB
SOUND CARD: ASUS XONAR D2X
PSU: CORSAIR AX 1200i
CASING: SILVERSTONE TEMJIN 07

WATERCOOLED BY:
M/B W/B:EK FB ASUS M5E
CPU W/B:XSPC RAYSTORM
VGA W/B:XSPC RAZOR GTX 680 X 3
RADIATOR: XSPC EX 480 X2 PUSH PULL
FAN : SCYTHE GENTLE TYPHOON X 16
PUMP:DUAL D5 VARIO WITH BITSPOWER DUAL PUMP TOP POM VERSION
RESERVOIR:EK X3
FITTINGS: All Matte Black-90 Degree Dual Rotary,45 Degree Rotary,Anti Twist Adapter,Dual Ig1/4 Rotary Extender,50mm Extender,40mm Extender,20mmextender,Stop Fittings,T-Blocks,Mini Valve,Sli Fittings X 2,Flow indicator x 4

OTHERS:
TEMP SENSOR: XSPC temp sensor with g1/4 plug x 4 pcs. (orange and white colour)
FAN CONTROLLER: SUNBEAM 4 FAN CONTROLLER
FAN POWER DISTUBUTION: modmytoys 8 ways 3 pin power distribution board x 2
CABLE SLEEVING: colortrail sleeves (white, grey, and black)
3D CARBON FIBER: maybe 3m brand or other brand which is affordable (black, grey, white)
XSPC 3mm TWIN LED WHITE

MODDING PLAN:
-Cut top casing for psu installation(DONE)
-Drill holes for fan controller(DONE)
-Bottom radiator plate(to make the radiator able to slide for easy cleaning)
-Sleeving psu cable (white,black, and grey) (UNDERGOING)
-Customizing midplate (still planning)
-Aluminum front plate for temp display(halfway done)
-Aluminum cover for cable management
-Carbon Fibering my casing

PARTS NOT YET ARRIVE:
-EVGA GTX 670 FTW+ 4GB bought from newegg (arrived 13-7-13)
-XSPC RAZOR GTX 680 NEW STYLE bought from friend who lives in us, coming home next week (arrived 10-07-13)
-XSPC D5 VARIO,XSPC TEMP SENSOR WITH PLUG X 4,SLI CONNECTOR,FAN POWER DISTRIBUTION BLOCK
bought from pristine watercooling bulk(arrived 13-7-13)
-SCYTHE GENTLE TYPHOON FAN 10PCS bought from cyntrixtech (arrived 09-07-13)
-XSPC 3mm white twin LED (arrived 09-07-13)

Current progress + picture
-Designing PSU holder on top, waiting to be cut when got free time


Current progress + picture
-Designing PSU holder on top, waiting to be cut when got free time




Picture

Disassembled casing



Mainboard + cpu with waterblock installed



Vga with waterblock installed





PSU



Radiators



Bitspower fittings





This post has been edited by pali_5373: Jul 14 2013, 05:54 PM


Attached thumbnail(s)

pakai hentam je ni bro.. haha..amcam 770? da sampai?

today

small update

top view



side view



will makes hole for fan controller tomorrow.

ada permainan dia di situ... dual ex 480 duk dekat bawah..

bitspower give present.. i won lucky draw

update 11 07 13

done with fan controller holes



test fit dual XSPC EX 480 at the bottom of the case

haha no ganas la bro... noob2 only..
since i no got good tools
i only use cutting disc attached to the angle hand grinder
for the hole i using drills and make fine using rotary grind stone

dremel not enough juice to cut that thick aluminium bro..
have to use big drill

update 14-07-13

yesterday poslaju sent me this item. bought from PPC thru pristine watercooling bulk

XSPC TEMP SENSOR WITH PLUG





this temp sensor will be installed before my XSPC EX 480 RAD. So i can measure the temperature of water in and out.
bought two color..white and orange.. white will be before cooler and orange will be after cooler

other stuff which arrive with my temp sensor is 3 x 8 pin pcb.bought two of this also.. will be used to power my 16 SGT



this is the best part

my gtx 670 now will get his third twin

here it is



bought from newegg

with two of his twins brother



with XSPC GTX 680 RAZOR W/B.. ready to install



i know the green color of the wb plate look fugly.. i will put white carbon fiber sticker on all of my waterblock plate.. including the raystorm plate and the mainboard w/b

today i manage to make the faceplate of my tj 07.. using acrylic panel..



with temp sensor installed



test fit on the case



face plate will be covered with black carbon fiber sticker..

the main switch also installed on the face plate..

that's all for today..
selamat berbuka posa utk yg berposa..

tadadadada

This post has been edited by pali_5373: Jul 14 2013, 05:50 PM

thanks for the support and suggestion..

This post has been edited by pali_5373: Jul 14 2013, 10:12 PM

hitam+putih+kelabu asap jerebu..

extenders yg kale itam tu nk spray kale putih..

nak tgk rig baru abam zorro... spam pic sini lai

sort of.. haha

hye.. not really an update. since i just recovered from bad flue
so no hard modding, only indoor modding.
test fitting my Bits and installing gpu wb
enjoy da picta

Gpu with it's armor


dismantling


done installing


put back the screws on stock cooler


and the mainboard












happy iftar to all muslims

maybe to makes the flow indicator blade spin faster by increasing the velocity. i dont know.i just using the stock one, not using the converter.i will experiment that when i bleed my loop.

this f/i thread need to be repair a little because it got uneven area and sharp edge across the thread.

and thanks for the support guys, today can start hard modding again.

also almost done with the psu cable sleeving.

the one im using dont have the rpm sensor. just normal one..

for the leaks, u may rub the thread with ur hand. u can feel there is rough surface on the thread..if u file the rough surface, there may be no leak. i also face the same thing when first time want to install the flow indicator.

I will balik kampung today. So no update for a week..i will try to complete the build before raya.. :-)

not really an update. and it's off topic btw..
this is the reason why i balik kampung..

after a long holiday, today managed to do some modding.
here is the pic

manage to make midplate
i decide to make the midplate in 3 parts

1st part for pump
2nd part for exhaust fan
3rd part for pass through hole

and the drillssssssss


midplate + pass through hole



2nd midplate with SGT



midplate with the pumpa

and the loop is finally complete, but sorry i forgot to took a photo of the loop.
and got a few pictar/

the loop is like this

pump 1+2 > cpu > mobo > 1st rad (480) > gpu 1 > gpu 2 > gpu 3 > 2nd rad (480) > res > pump








did make a psu cover for my lovely ax 1200i
the psu cover also will help in my cable management



psu cover in the making



psu cover attahched


sleeved cable, as per theme. black gray and black


sleeved cable



pcie cable attached to psu cover