Jul 5 2013, 10:49 PM
QUOTE(zealless @ Jul 4 2013, 10:16 AM)
Hi Everyone,
I am a importer, distributor and retailer for LED, however i only sells medium to high end LEDs for commercial and industrial use.
so i need feedback from you guys for ideas what to bring in for the residential market.
email / pm or post you question and suggestion here, i will try to improve my service to everyone.
email: >> kenny@vertsolcon.com (enquiry also)
From my experience selling LED for the last 4 years, i found out that the following rule of thumb to determine how much a person should pay on LEDs
1. Lumen/Watt (brightness/energy use = efficiency) i.e. 6 watt , 550 lumen = 91 l/m = very efficient
2. CRI (color rendering index) below 70, poor ; 70+ , ok ; 80 + good ; 90 + super expensive
3. Lifespans (25,000 ; 35,000 ; 50,000 hours)
4. Warranty (6 months, 1 year, 2 years, 3 years)
5. Brand of the chips (CREE, Bridgelux, Samsung, Epistar, Citizen, Toshiba, no brand etc)
Industry standard
1. Lumen per watt @ 3000k - downlight >85 , MR16 replacement > 40, others >65
2. CRI >80
3. Lifespan >35,000 hours
4. Warranty 1 year
Please advise me which is your priority of these
Thank you
Are you still selling the Aztech LEDs ?I am a importer, distributor and retailer for LED, however i only sells medium to high end LEDs for commercial and industrial use.
so i need feedback from you guys for ideas what to bring in for the residential market.
email / pm or post you question and suggestion here, i will try to improve my service to everyone.
email: >> kenny@vertsolcon.com (enquiry also)
From my experience selling LED for the last 4 years, i found out that the following rule of thumb to determine how much a person should pay on LEDs
1. Lumen/Watt (brightness/energy use = efficiency) i.e. 6 watt , 550 lumen = 91 l/m = very efficient
2. CRI (color rendering index) below 70, poor ; 70+ , ok ; 80 + good ; 90 + super expensive
3. Lifespans (25,000 ; 35,000 ; 50,000 hours)
4. Warranty (6 months, 1 year, 2 years, 3 years)
5. Brand of the chips (CREE, Bridgelux, Samsung, Epistar, Citizen, Toshiba, no brand etc)
Industry standard
1. Lumen per watt @ 3000k - downlight >85 , MR16 replacement > 40, others >65
2. CRI >80
3. Lifespan >35,000 hours
4. Warranty 1 year
Please advise me which is your priority of these
Thank you
I'm going to use LED for my whole house.
Already bought about 30 Oxy 6" and looking to buy another 25 more. I don't mind exploring other brands as long as it is white frame, round and 6" and most importantly can last.
Can you let me know what stocks you have an how much for each. I can also send you my floor plan to count how many I need.
Plaster ceiling is going up in my house so I will need to decide soon on the remainder.
Quote
0.0156sec
0.34
7 queries
GZIP Disabled