The McD at Shell Jalan Cheras? Opposite Midah?

Thats what I always say about Dugong drivers as well

Avoid detailing services from groupon.

The old adage rings true "you get what you pay".

Merz aka StarWash @ bukit Jalil

But actually if you really wanna protect your new car paint, go do coating.

No la....the one we're talking about only have 2 shops, one in Bukit Jalil the other one at Jalan Imbi.

But good info, must tell Ah Hock to convince him don't change the name, keep the "Merz" name

Merscht

Sounds German

Ayam bz this Sat

2 days in a row!

They should be the same for the first 1000km or so. If all other specifications are the same, the only difference between SS and FS is that the SS oils breakdown sooner than FS, hence the shorter oil change interval.

LM SS is better than LM FS, as for some reason LM FS doesnt have molybdenum.

Correct me if I am wrong.

If done at Merz, around RM700 IINM.

- FC dont feel is good, 370km - 380km driving at 3k rpm with 90kmh . Wonder how to improved FC?
New car, give it at least 5000km for the FC to normalize.

- Felt the gear ratio is very closed, any idea or info about 1st-5th gear ratio used?
Under 1.3 IAFM+ model 5MTT200A

» Click to show Spoiler - click again to hide... «

- Done 1st service and did asked the Potong Dealer SC about warranty void for suspension, driveshaft, tranny, crankshaft and etc if we change the besi rims.
Yes. that's why if wanna swap out the rims, keep your rim besi at home just in case so that you can swap back when claim warranty.

- IF we add on ICE and tempted the OEM wiring and void wiring warranty as well. True?
Yes

- Seen any 1.3 saga model upgrade to 1.6 crank or block? perhaps BOT with Haltech as well?
There are 1.6 stroker kit for sale for the Campro.

- Saw the sticky note for spare part list- price shown is from Potong SC,Dealer or normal spare part shop?
Proton SC and authorized SC as well as stockist.

- Btw, What's the purpose of that "Ular Oren" that can improved Throttle Response? Do I need too?
It can reduce throttle lag due to drive-by-wire delay. You don't need it, but it is nice to have.

Refer to V12kompressor's post above

Go check out this thread if you are bored in the office and have a lot of time to spare....too funny to not share

https://forum.lowyat.net/topic/2888158

Blow off sound comes from throttle valve close, not gear change.

Even your drive CVT, just press-release-press-release your throttle pedal, kepish kepish 100 times/km also can.

bus jadi airbus

Yes.

The turbocharger forces air into your throttle body, so when you release the gas pedal the throttlebody will close and pressure will build up between the compressor and the throttle body. The function of the blow-off valve is to release that air pressure.

That's why it is useless to fit blow-off valve on NA cars....there is no pressure build-up.

Cars like Preve recirculate the air back to the exhaust manifold, that's why there is no blow-off sound.

This post has been edited by dares: Jul 19 2013, 01:57 PM

fubar20 kenjilew

Remember tonite 8.30pm.

the show starts at 8.30pm.



This post has been edited by dares: Jul 19 2013, 02:08 PM

around 8 pm....hows the traffic around that time? need to plan ahead....I'm coming from Puncak Jalil.

Wokeh

You got say wanna go meh?