if ure a casual vaper, its a good mod to own. but if ure a chain vaper, likes to recoil ur tanks to low ohms, its best to look for other mods.

pro's - excellent firing with both vv and vw options. great for casual vapers who vape just a few puffs per session
con's - heats up quickly especially with low resistance tanks. few puffs and the heat warning sign comes up. a big no for chain vapers as the control head will be easily damaged

how come? tried the tanks on other mods?

just check the 510 connector material 1st. if i'm not mistaken both m16 and private v2 clones are using aluminium. the material is quite soft so it'll be easier to be loose in the future. try n look for ss material. just the 510 connector part.

if u use a normal battery, average resistance tanks without stacking batteries, ure safe.

0.8 above should be fine. 1 ohm n above to be safe. the most important thing is not to stack ur batts. lol

igo w has 3 poles kan? not sure about the 02 error because i never used a vamo b4 but i think it should still be ok if the resistance is within that range. not sure about vamo's board but if the resistance is within that range on an evic and u use it constantly, sure evic board will kaput

seriously i dont understand the hype about microcoil. lol

boss apa itu subohm liao i kenot brain

but if ure using mech mods, normal la. V=IR. lower resistance with constant voltage produces higher wattage which results in more heat emission. if ur using vv or vw mods u can always tune down the voltage to reduce the heat.

if u want to overcome the heat on mech mods, coil ur tank on higher resistance. or use weak batt or use kick on the mod would also reduce the heat.

not sure about the percentage of my mix but thats the same mix of flavour that produces my sirap limau flavour

anyone know where to find malic acid?i read in ECF that malic acid is used to make juices taste sour

aiyoh segamat jauh bang dari pasir gudang ni. aitam boleh la lagi

what tank are you using? ever tried dryburning it first?

if ure using mech mods, its easier to dryburn unlike using mods with boards to control voltage/wattage. it will definitely drain ur battery. usually i dryburn my tanks when my battery is running low

u can also torch it to start burning the silica rope. once the rope is burning, stop torching and press the trigger to dryburn it faster. torch all the access carbons left on the wick and it will be white like a new wick

parallel wire lettew

yugotuhel plis

huh. botol 30ml ade, sour rave takde. mat yg blend ocean blue pon ade kelua flavour lain walaupon ocean blue dia sedap gile. kamon la danz

danz ah. x variety langsung juice dia. kate nak sappork local juice tapi takde variety acane tu?

sebenarnya recoil vivi nova ni sangat mencabar

recoil tu adelah proses...em...malu pulak nak cakap sini takot kena ban

as a newbie, i do understand why ppl would recommend mech mods instead of vv mods. usually ppl sell ego type mods to new vapers but there are a few limitations on using ego type mods

- batteries are hard to change.
- cutoff time for circuit protection
- plain ego models cant check coil resistance

the only problem that mech mods cant offer is to check coil resistance. mech mods are more durable than ego type mods and can definitely last longer. the usage is almost the same with ego mods, screw in ur tank, get ur juice on n vape away.

to me its better than asking them to straight away use a vv mod which may confuse them and goes back to analogs.

LOL that is why i dont see the point of microcoils. to me it just taste the same. well that's just me but currently i'm not looking for anything else in my vapes apart from using a stable setup with maintenance items (wicks wires and juice) available