woah so cheap?????

why you price so much diff from the one above

too bad i don't have fren is car accessories boss

but this resin can be poslaju-ed meh?

iron man helmet

krokop? you mirian also?
kk, i'll take a look there when i need it

ya. saw similar topic at mcnet.

hehe, those resin is aviation spec, imported, for aircraft use.
of cos mahal.

u do what project? Need how much?

memang harga dia

lepas tu kena beli putty kasik licin

berpeluh gosok fiberglass pake kertas pasir

From mudah, i think one baldi like those nippon paint size also sell for rm300..

wow nice memory u have there, but i need the epoxy putty for other project not this ~



not much, 1kg should be more than enough..

waa this got experience one, you ever use before kaa? any other tips?

baling to the wall and sepak sepak it.

tips?


banyakkan mengaru

update us when ur project done

hope so..haven't started building it yet, researching more on the supplies now

The fiberglass cloth is known as mat or roving(coarse). For smooth finishing you need c-veil or add air dry or wax to the resin

You also need rubber gloves, brush or paint roller , acetone or DBE for clean up. Otherwise you will be using lots of brush and paint roller foamy as the resin will be harden between 20 to 30 mins depending on how much catalyst(hardener) you are using. You will be needing wax if your project is from a mould so it can be released. you will need a few different size rollers to roll away the air bubbles. You will be needing diamond coated air tools cutting/trimming. You also need a grinder to grind away flaws. Lastly you will be needing N95 dust mask so you don't breath in the dust If you are doing grinding...better wear Tyvek cover all(suit) so dust don't get onto your clothing. Otherwise you will be scratching like crazy

DIY carbon fibre kaki detected.. what vacumm bag system are you using?

i know of one fibreglass bodykit builder in kajang side.. dunno still there or not... haha!

ACE Hardware got sell, big & small tin oso got, big tin price from rm9x to rm200.

i study composite technology

we normally do dry layup using prepreg
resin infusion only do once, that is using closed mold system.

vacuum bagging usually using sealant tape, and bagging film only.. Then suck air out..
it be done to all wet layup, dry layup and of cos infusion.

if no vacuum bag, tak berapa cantik la..

mold pakai apa?
jangan pakai belon sudah..

wah.. got sifu here.. good good.. am not familar yet with the process using prepreg resin type.. involves oven baking the closed mould right?

prepreg means, the resin already stick to fiber, or in most our class, using carbon fiber..
it must be stored in refrigerator and every time take out, must record time..
reason to put in peti sejuk cos to slow down the shelf life..

preparation is quite leceh, but the result is awesome.. Rilek je tunggu..

u need
1. Hot bonder machine to control temp and supply heat to heat blanket
2. Heat blanket
3. Termocouple (put above caulplate, not under)
4. Peel ply
5. Perforated film
6. Bleeder cloth
7. Caul plate
8. Breather cloth
9. Vacuum bagging system
10. Pre preg of cos

Basically all u need to do is to heat the prepreg in a correct manner..
doesnt care whether closed mold system or open mold system using bagging..

yeah one of the frens who worked in crtm previously also mention prepreg = resin.. cos he blur when i ask him last time he do CF, the resin got flow into the vacuum bag or not?