I oc-ed my proc before wif this pcchips mobo n able changing the FSB to 199mhz wif multipliers X9 without any problems.. But since i change my mobo to dfi kt600 i can only clock the FSB until 175mhz wif multipliers X9 only.. If i clock over than that, my computer always restarts upon lunching any programs or games.. What the main reason behind that? Help... i'm a kinda new in this OC thingy..

most probably this motherboard not good enough for overclocking?? Check around in google on this motherboard, see others can overclock or not?

I think the pci and agp bus are not locked. Try to check the agp n pci bus speeds. It should be 33mhz for pci and 66mhz for agp.

OK.. Try to check that..
Btw, In ur own opinion.. what socket A mobo is good for OC-ing..

Abit NF7 series and DFI Ultra Infinity which uses nForce2 Ultra chipsets. They are the best out there.

Cant modify that value...

Manage to clock until 1.6ghz n up the cpu volt 10% but when i play battlefield2 it crash to desktop...

Put more voltage, increase bit by bit. Maybe the procs need more voltage.

erm...

convicted knight,

u are using AXP 1500++ ??

Did that already... the max value my mobo can increase cpu voltage is 10%... around 1.77v lah i think...

I dont know bout 1500++ or what lah... but stock speed is 1.2ghz...
Its a sempron.. but i manage to unlock it to athlon xp..
If i use my other pcchips mobo i able to clock 1.7ghz.

This post has been edited by convicted_knight: May 12 2006, 10:16 AM

hoh?
izzit urs sempron 2200+ juz like me?

after trying
get tiz


err
wat software u use to sensoring proc temp?
im using COre centre only(MSI utility)
idle 47
load 57-60 (i think it will burnt)




This post has been edited by Hackezkk: May 12 2006, 11:06 AM

Maybe that's the proc limit, sad to say u wont be able to get any higher than that with that mobo. BTW i recommend u guys to use Motherboard Monitor to monitor the Temps and Voltage rails.

LOL
im using motherboard monitor
but it show nothing
can't detect any tempt at all
huhuuh
now im using SPeedfan

I wud reccomend SpeedFan ....

I dont know izzit 2200+ or what but previously it was sempron.. i unlock it to athlon xp... I manage to get 1.7ghz with PCChips mobo...

i use mobo moniter.. is a good software.. currently it detect my proc, mobo, casing, psu, n my 2x HDD... It a good software thou...

Didnt get any readings ? Maybe u need to set the sensor manually. Anyway speedfan is a good one for beginner.

so
what for LEET??
hehheh

what mobo r u using ??

Haha, what i mean was its easy to use compared to Motherboard Monitor. Dont get offended k ?

'unlocking' a Sempron to AthlonXP is not a big thing since Sempron socket A is actually AthlonXP, just that it's differently rated in term of speed.

in this case, somehow I think the board is the limitation. probably the bus speed got 'haywire' since if it is not 'locked' or manually set to the correct speed (agp speed should be 66mhz only, or 67mhz under very high FSB).

Yup, since he's using kt600 there's not agp and pci lock. The bios is also one of the factor here since its a stock bios that causes the limitation. In the end there's nothing much u can do. Maybe u can try several combinations of divider and multiplier to achieve higher clocks.