Hi, wanna ask all Kelisa owners here who have changed their oxygen sensor.

1) how is the oxygen sensor look like? single wire or 4-wire type? bcoz I ask the spare part shop and he showed me 4-wire type and said kelisa/myvi also same can use this. but when i check underhood, looks like single wire type.

2) how much does it cost?

thanks

Thanks..just checked today by the spare part shop fella before wanna get new part..is single wire type. he said is kinda hard to find this anymore

my kelisa engine light is on during car stationary or slow at traffic light or jam time. then fuel consumption also increased alot due to that. read alot of comment said is caused by the oxygen sensor faulty. wonder if others who had experienced this would share how they fix this

no la...engine light is the orange colour one. red colour one is the battery and engine oil
i still couldn't find single wire type oxygen sensor...the spare part shop fella havent call me up til now.

After months searching for the O2 sensor but can't find it, I decided to send in the SC instead. Well, done the scan by the scanner and found no error at all!! I was quite surprised it wasn't the O2 sensor who cause the increasing FC and jerking. Well, since I was there and the problem still exist, I asked to clean the throttle body instead. After removed the throttle body, the technician found one of the grounding wire of the engine wire broken!! I mean there are like 4 to 6 of ground wires and only one of them broken. He confirmed that this is the culprit for the problem...reconnect the grounding wire and pop!! problem solved...now i'm getting back my good FC, no more engine light on and jerking.

FYI, before fix it, I could only go 250km for RM50 petrol....now I could go up to 400km.

So guys, you might wanna send your car to SC first if you have serious problem. I did went to outside foremans...some said O2 sensor, some said relay problem, some even said mounting problem( )