Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN Kia Cerato Owners CLub V1, 1.6 : Rm99,888, 2.0 : Rm118,888

views
     
Steven_C
post Apr 17 2015, 10:01 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
Got my Kia Cerato 2.0 last week from Mr Loh KS a.k.a BUYDIRECT. Overall the sales process was smooth one although minor issue pop up but it got resolved before collecting the car. In terms of offer, he is giving a good one not best. Alot of people said best offer but I disagreed. It depends on what you are looking for: values or freebies. If freebies, yes is a good offer if you don't want any headache to look for it later.
Like everyone said he patiently explains the features in the car especially the HU unit and the steering wheels functionality. It was very informative at brief but in details you might need find out others own your own later.
So far have found 2 issues with sound after 2-3 days of driving:,
1 is the HU unit near emergency signal button have some buzz sound during even and uneven road. When press area with finger the buzz is gone but when release is back.
2. Sunroof also have some vibration sound too. Manage to find out where it is, when press the roof the sound not there but when release sound is there.

Anyone have this issue? Appreciate can shared which SC is best to go to get it fixed.

Other than that, I'm loving the K3 from each time driving it. laugh.gif thumbup.gif
Steven_C
post May 9 2015, 01:55 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
QUOTE(cougar richard @ May 4 2015, 12:37 PM)
I have got similar noise too recently. Mine is at the clock assembly, it only make buzzing noise when cruising at low speed on a rough road surface. When press against then it was reduced. Anyway, it might also could be some wiring loosen inside the HU.

Similar problem was encountered by a member in this forum previously, he has got it fixed. I will be addressing this issue be it during my off day or maybe at my next service.

Don't mind please share with us your outcome too on what is happening and how it is fixed upon your visit to SC. Thanks bro.
*
Bro, mine is at this area between the emergency signal button and the digital clock unit. During every morning start engine, the vibration will slowly reach here and buzz sound like a loose spring. Also cruising low speed or uneven/rough surface will have it. When press the top flat surface the sound disappeared. Sent my car for 1k service at PJ Red Cube and they don't advice to open the dashboard. What they did is hand solution! sweat.gif Tumbuk tumbuk at top of dashboard surface and the noise disappear for some times. Hope no other sound appear after this solution. blush.gif The buzz sound still can hear at a less noticeable noise though, lately didn't hear much of the buzz sound. Will monitor it.

user posted image

For the sunroof noise, is loosen clip, they took it out and reclip back. Issue solved here.


QUOTE(cougar richard @ May 7 2015, 11:26 AM)
I think 80km mild cornering still ok for K3, the ESC symbol will not light up. So I guess your Kx will also behave the same. Tried a few times.

sometime when from static and on 1st gear, I will feel the car suddenly move forward unexpectedly. Could be due to deeper pedal pressed, but after that the car pickup actually not much power. Even when I fully press the gas pedal to flat on the floor and the RPM hitting 6.5k mark, I dont feel much power but rather just engine roaring. Sometime dont really have confident in overtaking or driving out of road if other cars are near.  I am using Shell RON 97 all the while

Make sure u check tyre pressure every 2-3 weeks to the right pressure and your car should be safe to tackle mild corner in 60-80km/h.
*
Once at 1 traffic light cornering felt the car swirl abit to left maybe due to sudden corner at 60-80km. Didn't see ESC symbol light up. So far didn't feel under power during pick up. But during jam the car felt abit moving forward might be due to the heavy body. whistling.gif
Steven_C
post May 12 2015, 11:02 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
QUOTE(cougar richard @ May 9 2015, 03:54 PM)
I also did tumbuk tumbuk, press hard hard on it. mine is at the edge of passenger side. It will solve a little while but still back to square again. I think the HU can open to fix inside, I will step in to sc and let them have a look.
*
Do update here if you manage to get it fixed by opening the HU. laugh.gif

QUOTE(Chester77 @ May 11 2015, 12:08 AM)
PJ Red cube, tumbuk tumbuk your car?  shocking.gif , surprise how they solve the issue. Anyway if you have a sunroof then mostly underpower is not a main issue for you. As only 2.0 have sunroof if not mistaken. Different engine la bro.
*
Yes! sweat.gif I also shocked but now sound less noticeable. Didn't hear it during start up nowadays. Yup mine is 2.0, so far feel the car is great. thumbup.gif
Steven_C
post May 12 2015, 11:13 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
QUOTE(Chester77 @ May 11 2015, 12:13 AM)
Asking for anyone polish their dashboard? which brand of internal polish is good? i try not to buy those oily type where once you wipe, you see a layer oil and hence the obvious oil layer with the non-polish area. (You know our dashboard area near the wiper area, it's almost unreachable with out a tool, so mostly that is the non-polish area brows.gif )

Please do share if anyone polish their car by own effort as well, plan to polish my car since it's been nearly 4 months, the original "shiny" from the clear coat need a boost. smile.gif
*
Where you did your coating earlier? Yeah anyone here did coating and polish please share experience. wink.gif
Steven_C
post May 16 2015, 01:19 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
QUOTE(perror @ May 13 2015, 10:36 AM)
I'm using Meguiar's ultimate protectant for my dashboard and trim and black parts of the car i.e the rubber portions. It's good but quite challenging to use, but clearly a huge difference between areas that have had it applied and those that did not.

My car is over 1 year old and haven't had the need to polish. In general, unless there's a significant build up of gunk..tree sap etc, there should not be a need to polish it too quickly, maybe once a year or so if you feel the shine has deteriorated. To that end I'd normally do a clay on it rather than just polish.

If you are to polish it, bear in mind if would be taking a very thin layer of your clear coat with it. So you'd have to wax it right after. Don't just polish.
*
Thanks for the advice bro! Really appreciate! laugh.gif
My car done ecoat, so far 1 month+, washing on own. Is pretty easy to wash when you have coating. Only thing taking me longer time is the body kit side near tyre, got splashed with some liquid during heavy rain I suspect. It mixed with the grease on the road I think and when it dried its very hard to wash away using the car wash shampoo. In the end use the car polish and easily got clean. icon_idea.gif
Steven_C
post May 19 2015, 01:51 PM

Getting Started
**
Junior Member
153 posts

Joined: Apr 2011
Guys, anyone have experience tight shifting of AT from P to R? I noticed mine is very tight when shifting from P to R when my car is parked slightly decline/incline. Is this normal? hmm.gif

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0214sec    0.61    7 queries    GZIP Disabled
Time is now: 28th November 2025 - 12:23 PM