Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 -+♠+-LYN Proton Persona Owners Club V.XLVIII-+♠+-, Gajah + Nuffs thread!

views
     
RaionShen
post Jul 1 2013, 12:00 AM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


just wondering, has anyone here tried spray painting their OEM persona rims flat black or any sort of colour, maybe even plasti dip? just wondering anybody? smile.gif
RaionShen
post Jul 5 2013, 03:48 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


hey guys, im a new owner of a Persona Standard Manual..just collected it earlier at 3.30pm from the proton showroom..drove back to my house tok about 5Km..as i reach home, mum said smell like rubber burning..when i open the front hood could see the exhaust manifold heating up and smoke was rising from it?

is this something i need to be concern about and take in to SC or is it normal coz 1st time being driven?? pls help...im worried, just buy scare ad got prob le :'(
RaionShen
post Jul 5 2013, 03:56 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 5 2013, 03:51 PM)
value for money?
not to forget...Inspila!
better take back to SC...only day 1 and u can see smoke coming out from the exhaust manifold...
*
ya thats what im worried about..told my dad about it and he said w8 till tmrw coz he's off day..he wanna go and shoot them...

BTW another thing i notice is that this metal piece was so cold that it had form water droplets..normal?Attached Image
RaionShen
post Jul 5 2013, 04:00 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(dares @ Jul 5 2013, 03:54 PM)
Or could be the sealant between the manifold burning in.

Drive for a few more days to see if it still happens.
*
ya could be..was wondering bout that too..thanks for your input bro..will try and see
RaionShen
post Jul 5 2013, 04:02 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


fubar20 can clarify this? so far i hvnt seen this happen on my car la...
*

[/quote]


this is another picAttached Image
RaionShen
post Jul 5 2013, 04:03 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 5 2013, 04:02 PM)
that piping is the path for refrigerant...nvr know that it can be so cold until like that...mayb tak pernah try lowest temp before...
*
the thing is it was at the lowest temp, and coolant level oso low..
but come out see like that...
RaionShen
post Jul 5 2013, 04:09 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 5 2013, 04:05 PM)
lowest temp being the coldest...is dis wad u mean too?
coolant level so low?  shocking.gif
u sure coolant level low? it is not supposed to be low...
*
just went to check..i so the coolant level, its fill half in the container..and the temp is low, so now i change high, try a drive and see how..
RaionShen
post Jul 5 2013, 04:30 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(dares @ Jul 5 2013, 04:17 PM)
Yar

RaionShen You need a pressure gauge used by aircon workshops to see if there are enough refrigerant.

Anyway, I don't there is any problem with your A/C.
*
thanks guys..just went out again..no more water droplets, just turn the temp high..all ok

only thing left now is the manifold area..just came back again..smoke lesser visibility but smell of burning rubber still there..went under the car to check whether any rubber bush or something else is burning ~none..
RaionShen
post Jul 5 2013, 08:15 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(zapdos9 @ Jul 5 2013, 07:57 PM)
That pipe sure got water droplet when you turn on the air con. Its just that the refrigerant is so cold travelling from your compressor to your air con coil in the cabin. it is only condensation happening when you open your bonnet.
That smoke also is normal for new car. probably need around 50-100km after driving then only those smell goes away after sealant dries up.
*
Thanks bro..i so far already traveled 56Km... rclxms.gif
No more smoke but the smell still there but not that strong compared to first time drive.. smile.gif
RaionShen
post Jul 6 2013, 02:38 AM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(dares @ Jul 6 2013, 12:38 AM)
Should normalized after awhile like zapdos said.

Enjoy your new car smile.gif
*
thanks bro biggrin.gif
RaionShen
post Jul 15 2013, 09:20 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


how long did you guys that before mod-ing ur personas (air filter,exhaust sys, etc etc)? just gt my persona last week..only one week past and i my hand gatal wanna mod...

is it advisable to wait at least 1st service then mod or maybe wait few months?? pls advise sifus smile.gif
RaionShen
post Jul 15 2013, 09:30 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(guy73 @ Jul 15 2013, 09:04 PM)
Hi guys.. new persona user reporting in.. ok in the first 1000km whats the limit of speed can go? heard that kereta baru tak bole bawak laju2.. nanti enjin tak tahan lama.. is it true?
*
hey bro, i got a new persona new..not sure about whether engine can than or not...but its not recommendable to tekan habis habis la..as the stroker and piston still new, u need to let it season first..
my fren owns a persona, the day he get the car until the first 1000km service, always tekan minyak kuat2, when the service time came, there was a sound in the engine, it seems that the piston cracked..
i dun think this will always happen as over the years i use proton cars only, i've never heard to the extent that the piston can crack..
so just take it slow...i drive evryday to penang, i'll just cruise at 110km..later i'll be going harder ahahha
RaionShen
post Jul 15 2013, 10:39 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 10:35 PM)
i mod even belum sampai 1000km yawn.gif
reason being *refer next reply below*
2 piston kong on the 2nd day i got my car... yawn.gif
replaced a new engine block and after that replacement, i forgot about what warranty is... sweat.gif
*
hoseh~ steady bro..lol !! but let say i duwan until kong my piston, is it recommendable to alter the exhaust sys so early, or just wait few months sin icon_question.gif
RaionShen
post Jul 15 2013, 10:45 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 10:43 PM)
erm...my piston kong on 2nd day i got my car...fully stock...only after i claimed a new engine block only i screw d warranty...

dun mod exhaust first.perhaps u can try to change the drop-in air filter and change the stock crank pulley to lightened crank pulley... smile.gif this 2 mods are the basic mods to me...
*
mine is a manual, maintain drop in or open pod? which is better? confused ~ rclxub.gif
RaionShen
post Jul 15 2013, 10:50 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 10:48 PM)
maintain drop-in then... previously i wanted to try open pod but advised by a sifu that the stock intake is sufficient for campro iafm...end up i didnt wanna do open pod already...maintained drop-in...
*
orait bro thanks for the tip thumbup.gif BTW lightened crack pulley which brand more suitable and sustainable?
RaionShen
post Jul 15 2013, 10:55 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(dares @ Jul 15 2013, 10:52 PM)
Drop-in is for low end gain, open pod for high end gain.

If you wanna use open pod, then you have to use heatshield and pair it with a modded exhaust system.
*
oh now i get it...thanks a lot, i think for me drop in better as i city drive 90%
RaionShen
post Jul 15 2013, 10:58 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 10:55 PM)
Thanks bro for the knowledge rclxms.gif  notworthy.gif
for the LCP (lightened crank pulley), if u r restricted with budget, u can get Works LCP (around RM330~RM350). if u can increase to around RM500~RM550, then u can get Mytheology LCP...exact price im not too sure...it is around d price range la...
*
mythology, yea i've heard of that brand..got good reviews about it, better to go for that than..better save up drop in+mytho lcp for now would be sufficient enough..work towards that goal rclxm9.gif
RaionShen
post Jul 15 2013, 11:02 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 10:59 PM)
then u shud get LCP installed too... tongue.gif
and FireStorm...pm seller for more details
both mods increase the low end torque...will help u a lot since u will be driving a lot in town/city...
*
what is firestorm bro, is it spark plug cables?

RaionShen
post Jul 15 2013, 11:16 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(ckdenion @ Jul 15 2013, 11:08 PM)
nope...it is like a spark plug booster that will boost the sparks so that there will be more fuel burning. pm seller dry.gif
anyway, this mod is PnP...it is plugged to one of the port in ur fuse box. easily removed, easily installed too... if u really wanna try it out, can join TT. so can ask v12kompressor to let u test before u decide whether u wanna buy or not...
*
i'll consider it bro..BTW i would be honoured to join u guys up for TT but i leave up north in kedah de cry.gif wish i was staying in u guys' area..the car mod scene there is huge..here like oppa kampung style..nearest for me to mod is at penang sad.gif
RaionShen
post Jul 15 2013, 11:20 PM

New Member
*
Junior Member
6 posts

Joined: Jun 2012


QUOTE(guy73 @ Jul 15 2013, 11:19 PM)
thanks for the info bro.. thumbup.gif
*
we are all here to help each other bro rclxm9.gif

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0262sec    0.43    7 queries    GZIP Disabled
Time is now: 9th December 2025 - 02:53 AM