Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Haswell, Devil's Canyon, Pentium G3258 OC V1, 4790K/4760K/4770K/4670K/G3258 | LGA1150

views
     
meons
post Jun 23 2013, 11:15 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(kmarc @ Jun 23 2013, 06:40 AM)
Vcore of 1.100v @ 4.1Ghz already hitting 75-79'c (about 10 mins). If I increase vcore to 1.2v, temps will hit 81-86'c in an instant.  sweat.gif

The most I can do with the temperature in my comfort zone is vcore 1.153v @ 4.2Ghz

What's your temp at 1.20- 1.25v?  hmm.gif
*
laugh.gif same as me too.around that temp . but i find it out ... cause my fan running at 8xx rpm doh.gif


This post has been edited by meons: Jun 23 2013, 11:17 AM
meons
post Jun 23 2013, 01:53 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
hai ...sawadee kap newbies here...wan learning about ocing proc blush.gif serious very noob

1st i try with stock volt.. oli got max 42 multiplier before fail to boot under

then try up more volt 1.2 .. set up 43 multiplier and do some testing on it

here some ss
dunno is ok or not.. did i do wrong with it hmm.gif ram temp... dunno where it come from

Attached Image
Attached Image

using cm212 single fan
value ram hynix

This post has been edited by meons: Jun 23 2013, 01:55 PM
meons
post Jun 23 2013, 02:10 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(kmarc @ Jun 23 2013, 02:06 PM)
Something wrong..... your LinX time is much longer and your Gflops is low. Are you running windows 7 sp1?

Take a look at mine:

[attachmentid=3501128]

Time of 71 (seconds?) and 114 GFlops.
*
nod.gif yes win7 64bit sp1

rclxub.gif how to fix it?

This post has been edited by meons: Jun 23 2013, 02:12 PM
meons
post Jun 23 2013, 10:06 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(cstkl1 @ Jun 23 2013, 02:23 PM)
Set cpu voltage mode to manual
then set ure voltage
set ring voltage mode to manual
u can leave it at auto or set it = to ure vcore. up ure cache multi to 100-300mhz less than ure cpu.

is it me or it seems 4670k batches are worse than 4770k. hardly found any on the net worth mentioning.

just get the latest version of IBT. its already updated and will work.
*
notworthy.gif notworthy.gif thank broo.... i will try again

it my mistake too .. i should build i7 rig ... but wan save some money and build as i5 rig
saving some money to grab gtx780 ... sweat.gif

mybe need sell it off ..and build i7 rig tongue.gif

This post has been edited by meons: Jun 23 2013, 10:07 PM
meons
post Jun 23 2013, 10:10 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(kmarc @ Jun 23 2013, 04:21 PM)
Oopsss! I'm also new to Haswell.

*
laugh.gif no prob ... even me more n0ob blush.gif

i will take note..what you all post... mybe i can use it... give some try notworthy.gif


meons
post Jun 26 2013, 03:33 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(stasio @ Jun 25 2013, 11:42 PM)
Hmm, RMA rate is increasing......code 00,71,77,78...... hmm.gif
*
cry.gif my mobo dead again...

i plan to grab new mobo..GA-Z87X-OC is ok... got any one have use it .. tongue.gif
http://www.gigabyte.com/products/product-p...spx?pid=4514#ov
meons
post Jun 26 2013, 03:41 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(cstkl1 @ Jun 26 2013, 03:35 PM)
seriously go for asus rog

try hero.

ngff m.2 and the board is really easy to oc the cpu part because asus made it easy.
*
doh.gif need sell off my GTX770 amp like this

i just sell off my i5 4670k to wan grab this mobo...


meons
post Jun 26 2013, 03:52 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(khaidir1976 @ Jun 26 2013, 03:45 PM)
Giga OC costly RM800 if you're interested... sweat.gif
*
my papa say if wan learn new thing .why not .pay extra buck on it.. but not to overdos my wallet
i can mod . ocing card... but fail to ocing proc.. doh.gif need learn from basic
meons
post Jun 26 2013, 03:57 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(khaidir1976 @ Jun 26 2013, 03:54 PM)
gud luck..
*
tks... and sory about spam..in here.. basicly i just wan asking and wan collect information
the model i choose ok.. or not...
meons
post Jun 26 2013, 08:10 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(cstkl1 @ Jun 26 2013, 05:33 PM)
currently 3 most used oc board for haswell is
m6e
gay gay oc
asrock formula oc
*
just back from local shop to cheack latest price

.GA-Z87X-OC rm780



This post has been edited by meons: Jun 26 2013, 08:34 PM
meons
post Aug 18 2013, 01:59 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(slap2begin @ Aug 17 2013, 08:41 AM)
im newbie...anyone can give me guide to oced at msi m power mobo using 16gb 2800mhz ram? really dunno how to set it at bios
*
sweat.gif request to buy gay-gay OC -X tak mau.... tongue.gif
if not stasio can teach you and share infomation with you about ocing
meons
post Aug 20 2013, 08:22 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
got win8 user?
Windows 8 Benchmark Records No Longer Accepted At HWBOT

http://hwbot.org/news/9824_breaking_window...epted_at_hwbot/
meons
post Nov 12 2013, 08:10 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(stasio @ Nov 1 2013, 05:12 PM)
If anybody need,here is latest  ASRock Z87 BIOS:

Z87M OC Formula - BIOS 1.54
Z87MOCF154

Z87 OC Formula - BIOS 1.82
Z87OCF182

Z87 Extreme 6 - BIOS 2.10H
http://www.mediafire.com/?u3r931hb3ndlck4

Z87 Extreme 4 - BIOS 2.32B
http://www.mediafire.com/?xqxmr2zk0yibzq3

Fix: Change the CPU multi in the OC i5 4670K
*
Z87 OC Formula - BIOS rclxms.gif rclxms.gif
tks broo.... notworthy.gif notworthy.gif

meons
post Jan 4 2014, 11:25 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
rebuild back my system.. early rig was destroy by kebabom psu biggrin.gif

some quick stress testing .. 50minute sweat.gif

cooler via air cooler Prolimatech Supermega dual fan setup tongue.gif
asrock z87 fatal1ty professional
cheapo ram ... early ram was destroy too cry.gif

it okie or fail laugh.gif any tips for me hmm.gif


Attached Image

which one better adjust multiple @bclk tongue.gif

This post has been edited by meons: Jan 4 2014, 11:30 AM
meons
post Jan 4 2014, 10:49 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(owikh84 @ Jan 4 2014, 06:43 PM)
The BCLK @ 99.98MHz can be fixed to 100 if you disable the CPU Spread Spectrum in BIOS.

AIDA64 stress test must be set manually, to stress the RAM at maximum amount of capacity.
Go to Preference/General/.....Memory Block Size (512 MB, 1 GB, 2 GB etc). By default it is 16 MB only which is not sufficient to stress the Integrated Memory Controller aka IMC built on the chip.
*
nod.gif take note and tks you to restore back my old memory blush.gif CPU Spread Spectrum in BIOS. need disable during ocing
got anything part need disable too sad.gif lupa habis bro .. most of time kita enter bios for check/ disable igpu intel displays only tongue.gif

if i just wan focus on cpu 1st can blush.gif leave ram as default settings.. since right now using the cheapo one. scare to over stress it
plus z87 fatal1ty professional have isuee with memory xmp .. so need be setup manually if wan ocing... sweat.gif can i skip it 1st
meons
post Jun 14 2014, 11:57 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
this unit
user posted image


2.8ghz to 4.5ghz requirement around 1.426 voltage hmm.gif it bad or not

user posted image

This post has been edited by meons: Jun 14 2014, 11:58 PM
meons
post Jun 15 2014, 02:52 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(cstkl1 @ Jun 15 2014, 01:06 AM)
hmm bad and the worst 4770k is 1.1v 3.9ghz. yeah f***ed up. basically stock vid is the clock.
Avg ones are 4.2ghz but still 50:50 u end up the above or this.
Above Average is 4.5ghz @ 1.1v... 5-10% chance of getting this. i had one but the imc like screwed up even 2400mhz it had issues and the vccin voltage was fluxing like mad.
And Awesome one with god himself coming down and patting u in the back is 4.7ghz@1.1v.. literally. he came down and whispered bless u my son.
thats rare. even on percentages... any ram.. stable vccin.. u name it. this do 5ghz @ 1.25v.

so whatcha think about that 1.42v again @ 4.5ghz.. thats the hall of fame worst one ever.
*
tongue.gif mybe that why it cheap ... plus after check it non K base proc but come with unlock multiple laugh.gif

but base on ss previous owners it hit 1.298v on. 4.5ghz

mybe something worong with mobo @ os. hmm.gif . current test using asrock fataly Z87 and win8.1 pro
meons
post Aug 26 2014, 01:19 AM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang
QUOTE(aswawe @ Aug 21 2014, 09:41 PM)
Why my g3258 cannot boot?mobo asrock z87m pro 4,help
*
before use devil proc.. need reflash bios latest bios 1st using old haswell proc nod.gif



« Next Oldest · Overclockers United · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0256sec    0.35    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 11:30 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.