QUOTE(dblooi @ May 19 2007, 09:27 PM)
i booted up as default speed then further adjust in the windows by using clockgen and biostar overclocking tool. Max speed that i tried to clock up tru bios is 320-340X8 ( Cant remember adi but it is more than 300HTT) .My mobo is rev 1.1 . As u can see in the screenshot, i'm using 811 BIOS
However, i always swap between 505 and 811 BIOS. Sometimes i will use 505 bios also as it is pretty overclockable + ram timing menu available in that bios
This mobo can go very far by using clockgen in windows. I'm sure u can play with brisbane pretty well by using this mobo. The things i don't like about this mobo are the limitation of vcore & vdimm, cannot go further without extra vcore and vdimm
i love 505RH bios too but it doesnt give the correct temp for core. i'll try the 811 bios today. we have the same revision board but i'm using 3500 orlean. max clock using the maximum voltage thru bios is only 2.8ghz, this proc need more voltage coz i dont have any problem with temp. i'm using xp90c with nidec fan 110cfm
but thru biostar tool i can reach 3ghz with 1.6v, i read somewhere in rebel haven forum their chip regulator in the board only can supply maximum 1.55v but why using biostar tool we can set the voltage at 1.6v
my proc need this voltage to reach more than 2.8ghz.
looks like biostar still didnt do a good bios for this board, and i afraid their will not give any attention since their have another replacement board eg. ta690g! so i might buy this board first. their vdimm and vcore max is so promising!!
This post has been edited by jumajuma: May 26 2007, 12:09 PM 
May 18 2007, 08:41 PM
Quote
0.0263sec
0.49
7 queries
GZIP Disabled