Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Biostar Tforce 6100 Overclocking Discussion, Biostar Tforce 6100 modded bios inside!

views
     
SUSStupidGuyPlayComp
post May 11 2006, 02:09 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 11 2006, 12:52 PM)
wanna ask all those sifu here. my system is prime stable at 2300Mhz for 7-8 hrs and i'm using a 6600gt at stock but why my computer will hang when i play dota half way. if i lower my cpu speed to 2250Mhz or below it will be fine. 
i'm quite certain the problem is my cpu causing the problem but isn't it suppose to be rock stable after it pass prime tes for 8 hrs ?

setting
htt = 230
multi = 10
ram = 2.5-4-3-8 ( okie i know it's abit tight for bt-d43 but even if i set it to 3-4-4-10 the same thing happen )
wanna ask what you guys set for the read preamble time and mas async time ? for hte max async time anythign above 6 and it's no post for my mobo. weird. and i tot it's suppose to be more stable if you set it around 8
*
Warcraft is the nice game to test memory stability
SUSStupidGuyPlayComp
post May 11 2006, 02:11 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 11 2006, 10:56 AM)
RM275 in gadget zone penang. find silence here in lyn forum
RM270 in bulk section go to bulk section search around
RM325 in ATE lowyat plaza

i remember coz i was looking around for it also.
*
How much you bought?
penang RM275 only arr drool.gif

Biostar have 2 model 6100 board wor
another one is M7/M9, Low yat only sell RM259
but it unsuitable for OC
SUSStupidGuyPlayComp
post May 11 2006, 04:25 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 11 2006, 03:17 PM)
i run 3dmark loop 3 times no problem at all.
hmm memory problem ar ... quite possible all though it pass window memtest but it could be it. all though i'll be dissapointed if it's memory problem coz on my lanparty i was able to hit 263 Mhz 2.5-4-4-8 1T without problem.
the price i quoted is Tforce series. i bought rm290 from silence including postage to my house.
*
you can try 06 October BIOS,althrough its less of memory setting
but actually its more stable,i try before
SUSStupidGuyPlayComp
post May 15 2006, 09:30 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 15 2006, 12:58 AM)
means need to flash it using floppy disk are. aiseh. sien le .. i don't even have my floppy connected to my pc.
*
rclxms.gif In holiday,few day not appear
You flashed the BIOS version 1006, I think you have use the winflash to flash.
If you flash BIOS 1006 with winflash it will lock the BIOS
you are unable reflash,
tongue.gif to solve this problem,go to gigabyte web site down the flash program call Qflash or QBIOS (forgot already I not sure which one),then use the program reflash the BIOS

I remember I have mentioned before (suppose page 2 or page 3)better flash the BIOS by CMOS,
if flashed in WIndows(winflash) may be will spoilt the onboard LAN,because it will flash the MAC address also

Cant OC after flash BIOS because you haven clear CMOS yet,
please clear the CMOS one time after flash new BIOS

I use this board not facing any unable transfer file problem in network,
currently connecting 2 computer.
but i facing always ADSL modem disconnect problem now, not sure is modem,line,or board problem.
Suggest buy router
SUSStupidGuyPlayComp
post May 16 2006, 11:49 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
biggrin.gif My SP2800+ temp
idle 30
full load 38
casing side panel whether open or close still same temp
SUSStupidGuyPlayComp
post May 16 2006, 01:10 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 16 2006, 11:56 AM)
MEmory stable at 230Mhz. 2.5-4-8-8 1T

[attachmentid=108143]
*
KVR really not so nice, many unable above 240
SUSStupidGuyPlayComp
post May 16 2006, 01:12 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
sad.gif
my T6100 have ADSL drop line bug, bore rclxub.gif
SUSStupidGuyPlayComp
post May 16 2006, 03:53 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 16 2006, 01:25 PM)
hmm .. so kvr is not recommended to pair with biostar tforce eh ? last time my ram can hit 280Mhz on 1T. hopefully now can reach 240Mhz tongue.gif
*
Your BIOS problem settle?
SUSStupidGuyPlayComp
post May 17 2006, 03:12 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 17 2006, 03:05 PM)
hmm.. my mobo cannot hit 245htt above la weird. no matter how low i set the  multi or lower the ram speed still cannot.

i tried
htt = 250
multi = 8
htt multi = 3
ram = 133

cannot boot la. could it be my mobo limitation?
*
I think is your CPU,
How high your CPU can be achive in DFI?
SUSStupidGuyPlayComp
post May 17 2006, 04:46 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 17 2006, 03:47 PM)
noob question. how to save the bios setting in bios. i mean we are able to store more then one setting in bios right? i think i read it in the manual it's up to 99 differetn setting. but as fas as i see ( or i know ) i can only overwrite the previous setting. meaning i can only save one bios setting at the cmos ?

question is
1. we can only store on bios setting at cmos ?
2. if can store more than one how to store? coz i press up and down button nothing happen. but once i press enter i'm only allow to overwerite the previous setting.

thanks.
*
I said before BIOS 1006 have bug,
same with you, 1.55Vcan go up 1.65V

1.Yes,CMOS can store BIOS setting up to 99
2.I not sure what I press to change,forgot,
try few more time,its can,the setting stiil remain althrough you flash new BIOS
SUSStupidGuyPlayComp
post May 17 2006, 05:37 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(nakata101 @ May 17 2006, 05:28 PM)
O ..shit me too....  me should get 1mb for download... just now is 512kb only...
*
biggrin.gif me should get 512kb for download... just now is 1mb only

I mean drop line is ADSL always disconnect
SUSStupidGuyPlayComp
post May 17 2006, 05:43 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(StupidGuyPlayComp @ May 17 2006, 05:37 PM)
biggrin.gif me should get 512kb for download... just now is 1mb only

I mean drop line is ADSL always disconnect
*
althrough 1MB connection but maximum BT download speed only 60KBs
before i sucribe 1MB package download speed can achive 90KBz
SUSStupidGuyPlayComp
post May 17 2006, 05:45 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(nakata101 @ May 17 2006, 05:41 PM)
Me dint get dc problem.... maybe  i need to reset modem n check again...
*
may be my one is modem problem
i using Aztech 208U USB modem,no LAN port

but T6100 really have ADSL disconnect problem,
Biostar admit that, many person complaint

Any suggestion can solve my problem cry.gif
SUSStupidGuyPlayComp
post May 18 2006, 08:27 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(nakata101 @ May 17 2006, 06:03 PM)
DO like other members ...RMA !!!!
*
biggrin.gif What is RMA?
SUSStupidGuyPlayComp
post May 18 2006, 05:26 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(jon89 @ May 18 2006, 05:06 PM)
erm....shadow_dweller, my current procs running at 2.56ghz @ 1.5vcore in bios, but 1.47 shown on my CPU-Z......ram at 182.7mhz @ 2.5-3-3-7 1T
*
this board try to lower Vcore,i dont know why
if you set 1.40V actual is 1.386~1.392
1.425V is 1.392~1.408 this one should be AMD actual default
I set 1.20V only have 1.168~1.182
SUSStupidGuyPlayComp
post May 19 2006, 12:52 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 19 2006, 11:56 AM)
you all got any options to change the chipset voltage ar ? mine are pretty low le the chipset voltage. around 1.2-1.3v only . i remmeber my last mobo chipset voltage was around 1.5-1.9v
*
this board unable change chipset voltage,
my one only ~1.15V

you conform your CPU can go up to 28XMHz in DFI?
may be you need to try again
SUSStupidGuyPlayComp
post May 19 2006, 11:05 PM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(shadow_dweller @ May 19 2006, 01:47 PM)
100% sure. attach picture for reference.
*
drool.gif your RAM hit at 2.99V wor
this motherboard need hard jumper setting to achive 3V
have you try 2.9V before
SUSStupidGuyPlayComp
post May 20 2006, 08:47 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(edlight @ May 20 2006, 07:18 AM)
I'm about to overclock a tforce 6100. I see that in the bios under Advanced Chipset Features there are settings for the NB <-> SB ht ratios. Are you supposed to adjust these when you raise the clock and lower the ht ratio in the overclocking screen?
*
NB <-> SB ht ratios.......just keep it
ht ratio in the overclocking screen?............need to change
SUSStupidGuyPlayComp
post May 22 2006, 12:34 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
1.376to3GHz
very good
but not stable lah
SUSStupidGuyPlayComp
post May 22 2006, 08:24 AM

Kenny Is Here
********
All Stars
13,681 posts

Joined: Mar 2006
QUOTE(avenger @ May 22 2006, 12:48 AM)
how u know not stable? blink.gif
*
smile.gif you see the RAM speed.
« Next Oldest · Overclockers United · Next Newest »
 

3 Pages < 1 2 3 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.1291sec    0.54    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 11:55 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.