ANJINGNEARING GUIDE FOR AUDIO DIY
[attachmentid=3495732]
INSPIRA only have these 2 connector behind the deck ..
There are few common wires which whatever Headunit will required.
1. Batt (12 v) .. constant even when ignition is off. This is to use to preserve the memory and the running clock. Connect this to pin 30 (Red-White).
2. Ignition (12v) .. this power comes on when ignition is turn on. This is to power on the headunit. connect to pin 21 (Blue-Red)
3. Ground (-) . This is the return point of the power. Suppose to be pin 40 (black) but inspira wiring is NOT CONNECTED. So you just have to connect the Ground (your headunit) to the car chassis ..any screw will do (must be touching the chassis)
SPEAKERS
FL (+) - pin 28 (White - Blue)
FL (-) - pin 38 (Black - Yellow)
FR (+) - pin 26 (White - Red)
FR (-) - pin 36 (Black - Red)
RL (+) - pin 27 (Yellow - Blue)
RL (-) - pin 37 (Grey - Blue)
RR (+) - pin 25 (Yellow - Red)
RL (-) - pin 35 (Grey - Red)
If you are connecting a 3rd party steering controller module ..
You will require to tap in pin 22 and pin 32.
if you require to power up the amp. u can try pin 24 first ,if it does not work use pin 21 as well. Warning . this is just to signal the amp to wake up. Not the actual power line. you should connect the actual power line from battery to your amp.
Good Luck ..
psst .. we dun just google .. we know what we are doing .. .LoLz
Arigator...God of Kopy !!Man sui man sui man man sui.....